How to Remove the Spare Tire of BYD S6?

[SanArthur]

In the vehicle's tool kit, there will be a set of straws and a small rod about 5 centimeters long. Connect them and open the rear flap. To replace the car's spare tire, you need to prepare a jack, a wrench, and the spare tire. First, use the jack to lift the car, then use the wrench to unscrew the tire bolts. You can then remove the tire and replace it with the spare tire. After tightening all the tire bolts as they were, remove the jack, and the spare tire will be successfully replaced. Lift the trunk luggage mat to see the spare tire. Then, unscrew the knob that fixes the spare tire to take it out.

[MacJulia]

Removing the spare tire from the BYD S6 is actually quite simple. I recently helped a friend with this. First, open the trunk and lift the floor cover inside to reveal a circular or square cover, which is where the spare tire is stored. Using the hook or wrench from the vehicle's toolkit, locate the connection points and loosen a few screws to remove the spare tire. During that operation, I noticed that the spare tire hooks on some models were a bit rusty, making it a bit harder to twist them off, but remember not to use excessive force. If the spare tire hasn't been used for a long time, it's recommended to check it every six months to prevent the tools from rusting and getting stuck. Paying attention to these small issues can save a lot of trouble.

[Dallas]

In my experience, removing the spare tire from the BYD S6 involves several key steps. After opening the trunk, remove the protective mat at the bottom to locate the large plastic cover plate. Use the bolt wrench from the vehicle's tool kit to slowly turn the fixing clips on the cover plate. Sometimes the clips are designed as T-bolts, and turning them one or two rounds will release the spare tire. Be careful not to touch the surrounding small tool bags during the operation. After removal, it's advisable to check if the spare tire's pressure is sufficient to avoid it being unusable in an emergency. Don't rush this DIY process; taking time to ensure each step is done correctly can prevent damage to parts. The entire process from start to finish typically takes about three to five minutes.

[WillowRose]

Removing the spare tire from the BYD S6 is not difficult. Open the rear trunk, lift the bottom cover panel, use a wrench to unscrew the bolt, and the spare tire will come right off. Remember to park safely and engage the handbrake first to prevent any accidents from movement. The whole process takes about one or two minutes, just operate steadily.

[JulietLee]

I always feel that removing the spare tire is a small detail, but safety comes first. On the BYD S6, after opening the trunk and moving away the mat, use tools to slowly loosen the fasteners. During the process, ensure the vehicle is parked on level ground with the handbrake firmly engaged, otherwise, applying force may cause the car body to shake. After taking out the spare tire, check the tread and air pressure as a routine. If it's leaking, patch it up immediately. These small habits can make emergency situations more reassuring.

[VonRuth]

Removing the spare tire on the BYD S6 is quite simple. I just opened the trunk, lifted the carpet to locate the fixing point. Using the small tool that comes with the car, I loosened the bolt and the spare tire came down. After removal, I took the opportunity to check if the spare tire had aged or cracked, as prolonged storage can lead to deterioration. Keeping it dry during storage can extend its lifespan, and checking it once a year is no hassle.