How to Remove the Rear Seats of the Qashqai?

1 Answers
LeMolly
07/29/25 11:10pm
The method to remove the rear seats of the Qashqai is as follows: 1. Pull the strap under the rear seats of the car; 2. Remove the hook on the left side of the rear seats; 3. Remove the hook on the right side of the rear seats; 4. Press the button on the right corner of the rear seats to remove the backrest; 5. Unfasten the seat belt on the rear seats. Taking the 2021 Qashqai as an example, it is a midsize SUV with the following dimensions: length 4401mm, width 1837mm, height 1593mm, wheelbase 2646mm, fuel tank capacity 57l, and curb weight 1444kg.
Was this review help?
2
5
Share
More Forum Discussions

What is the fuel consumption of the Cadillac CT6?

Cadillac CT6's fuel consumption is 7.9L. The following are specific details about the Cadillac CT6: Configuration: Driver/passenger airbags, front side airbags, front/rear head airbags, passive pedestrian protection, tire pressure monitoring, ABS anti-lock braking, brake force distribution, brake assist, traction control, vehicle stability system, etc. Power: The Cadillac CT6 is equipped with a 2.0T engine, paired with a 10-speed automatic transmission. The 2.0T engine has a maximum output power of 177 kW, a maximum torque of 350 N·m, a top speed of 230 km/h, and a 0-100 km/h acceleration time of 7.47 seconds.
17
0
Share

How to Distinguish Between Engine Oil and Gear Oil?

Methods to distinguish between engine oil and gear oil are as follows: 1. Usage: Engine oil generally refers to the lubricating oil used in various engines, and it is the most widely used lubricant in engines. Gear oil, also known as transmission lubricating oil, is mainly used to lubricate the gears in the transmission system of automobiles and tractors, including gearboxes, reducers, and differentials. 2. Source and state: Gasoline engine oil is extracted and refined from underground oil wells. This unrefined lubricating oil is not suitable for engines, so it must undergo strict refining and the addition of various elements to effectively suppress unstable states in extreme cold and high temperatures. Gear oil has a higher viscosity than engine oil and is slightly black, hence it is also called black oil. Due to the different shapes of gear teeth, the requirements for gear oil also vary, generally divided into regular gear oil and hypoid gear oil.
2
4
Share

Can I Add Good Fuel After Adding Poor-Quality Fuel?

If poor-quality fuel has been added to the car, it is best not to mix in good fuel immediately; instead, wait until the current fuel is used up before refilling. Remedial measures for adding low-quality gasoline are as follows: 1. Clean the fuel system: Poor-quality gasoline contains many impurities that can clog the fuel system. It is necessary to replace the fuel filter and clean the fuel injectors promptly. If there are excessive impurities, the fuel tank and fuel lines should also be cleaned to prevent more severe consequences. 2. Clean the cylinders: Poor-quality gasoline leaves behind significant residues after combustion, which can form severe carbon deposits over time that are difficult to remove. The cylinders should be cleaned to prevent these residues from hardening and damaging the engine. 3. Clean the three-way catalytic converter: The gases produced by burning poor-quality gasoline can poison the three-way catalytic converter. Cleaning engine carbon deposits may also cause blockages in the three-way catalytic converter.
16
1
Share

Why can't the gear shift be moved from P position?

Automatic transmission P position locks the vehicle's gear shift. Below is relevant information about automatic transmissions: 1. The transmission has evolved from manual operation to automatic shifting: However, automatic transmission gears still have certain timing requirements. Improper operation (such as the automatic gear lever being stuck in P position) and forced gear shifting can easily damage the transmission. Let's look at how the automatic P position works: When the gear lever is in P position, the parking lock mechanism locks the transmission output shaft. In P position, the drive shaft is partially locked inside the transmission, so even without pressing the brake on flat ground, the vehicle still has some braking force. 2. Solution when the automatic gear lever is stuck in P position: To shift to other gears, first start the vehicle and then shift to other gears; or press the brake pedal before switching gears. When parking normally, always ensure the vehicle comes to a complete stop before shifting to P position, otherwise this situation of the gear lever being stuck in P position can easily occur.
11
1
Share

How many seats does the Baojun 510 have?

Baojun 510 is a five-seater. The Baojun 510 is a small five-door, five-seat SUV under the Baojun brand, with dimensions of 4220mm in length, 1740mm in width, and 1625mm in height, and a wheelbase of 2550mm. The Baojun 510 is available in models that meet both the China V and China VI emission standards, with different power outputs between the two. The Baojun 510 is the first in its class to feature a semi-open panoramic sunroof, which enhances the driving and riding experience by providing a broader view. Additionally, the Baojun 510 CVT version has been upgraded in terms of overall NVH (Noise, Vibration, and Harshness), featuring 34 high-performance acoustic filling materials throughout the vehicle, resulting in an idle noise level of just 37db, significantly improving the quietness of the cabin.
6
5
Share

What is the Emission Standard of the Baojun 360?

The Baojun 360 complies with both National V and National VI emission standards. The 2018 Baojun 360 model meets the National V emission standard, while the 2019 model meets the National VI emission standard. The Baojun 360 is an MPV produced by SAIC-GM-Wuling, with body dimensions of 4615mm in length, 1735mm in width, and 1660mm in height. In terms of powertrain, the Baojun 360 is equipped with only one engine option: a 1.5-liter naturally aspirated engine. The 2018 model's engine delivers a maximum horsepower of 112 HP, a maximum power output of 82 kW, and a peak torque of 147 Nm. The 2019 model's engine produces a maximum horsepower of 105 HP, a maximum power output of 77 kW, and a peak torque of 135 Nm.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.