···
Log in / Register

Is a Car Water Temperature of 105 Degrees Normal?

6Answers
MacTheo
07/24/2025, 04:21:43 AM

If the water temperature reaches 105 degrees, it might be slightly high. Generally, the normal operating temperature for a vehicle is around 90 degrees. If it exceeds 100 degrees, it's advisable to check for potential issues with the vehicle. Below are common causes of high car water temperature: 1. Insufficient Coolant: Leaks or low coolant levels can cause the engine temperature to rise. In such cases, inspect the coolant level and top it up if necessary. Monitor the level over the next few days to see if it drops significantly, indicating a possible leak that needs to be located. 2. Faulty Cooling Fan: A malfunctioning cooling fan can prevent heat generated during high-speed driving from being effectively transferred to the antifreeze, impairing cooling. This can lead to overheating of the antifreeze and issues like boiling over.

Was this review help?
110
Share
LaSerenity
08/10/2025, 09:06:18 PM

I noticed the car's water temperature is a bit high at 105°C. The normal range is mostly between 85°C and 105°C, with the ideal being around 90°C. While 105°C might briefly occur in some high-performance cars or during aggressive driving, it's not the norm. This indicates an issue with the cooling system, such as insufficient coolant, a non-functioning fan, or a clogged radiator. Ignoring it could lead to engine overheating and costly damage. I recommend stopping immediately to check the coolant level—if it's low, top it up with distilled water. If the temperature gauge warns you, turn on the heater to help dissipate heat. For routine maintenance, remember to replace the coolant every two years and keep the radiator clean to prevent overheating risks, ensuring safer and more worry-free driving.

Was this review help?
1
Share
Expand All
VanJessica
09/24/2025, 10:06:57 PM

I think a coolant temperature of 105°C is abnormal, as engine design temperatures typically range between 90-100°C. 105°C indicates the cooling system is on the verge of triggering an alert. During long-distance driving in hot conditions, I've experienced that high coolant temperatures cause engine vibration or reduced efficiency. Potential causes include coolant leaks, water pump failure, or air entering the system. Timely action is required: avoid high-speed driving, check coolant levels only after the engine has cooled down, and regular maintenance of fans and hoses can prevent issues. High coolant temperatures also negatively impact fuel consumption and emissions, so early repairs can prevent costly damage later.

Was this review help?
14
Share
Expand All
Tamara
11/07/2025, 11:14:23 PM

In my experience, 105°C is too high. Normal coolant temperature is around 90°C, while 105°C usually indicates aged coolant or low coolant level, such as when the fan is stuck or the radiator is dusty. The last time my car's temperature spiked, it was due to a clogged radiator, which was resolved with a simple cleaning. High coolant temperature can easily cause engine overheating and boiling, damaging the cylinder head. I recommend regularly checking the temperature gauge and pulling over if it enters the red zone. Also, maintain a cooling system inspection every six months to prevent minor issues from becoming major problems.

Was this review help?
18
Share
Expand All
Adaline
12/29/2025, 01:01:44 AM

A water temperature of 105°C is not normal. Most engines operate within a standard temperature range of 85-105°C. Reaching the 105°C upper limit indicates high system load, potentially caused by thermostat failure or poor air circulation. Insufficient cooling can shorten engine lifespan and even lead to oil leaks. I've encountered similar cases where cleaning the radiator fan and replacing the coolant resolved the issue during repairs. Preventive measures include gently touching the radiator after parking to check temperature, using dedicated coolant for refills, reducing air conditioning usage in hot weather, and maintaining smooth driving habits.

Was this review help?
19
Share
Expand All
StAmy
03/26/2026, 03:37:01 AM

I noticed the water temperature is high at 105°C. For regular cars, the normal range is 90-105°C. Although 105°C is at the upper limit, it can easily lead to issues such as insufficient fan operation or pipe leaks. It might be slightly higher compared to some diesel or off-road vehicle models, but maintaining this temperature long-term poses significant risks and accelerates component wear. I recommend checking the radiator seals and coolant color, replacing it promptly if it appears cloudy. If encountering high temperatures while driving, slow down and pull over. Regular maintenance of the cooling system can prevent engine failure.

Was this review help?
20
Share
Expand All
More Q&A

What is the Truth About Wasabi Green Fuel Additive?

Wasabi Green Fuel Additive is considered a legitimate brand of fuel additive. Some car enthusiasts have conducted specific tests and found that Wasabi Green Fuel Additive has a certain effect on cleaning carbon deposits in vehicles, but the actual results are not as impressive as claimed by the merchants. Fuel Additives: 1. Classification: Fuel additives can be categorized by target use into gasoline additives and diesel additives, and by function into three main types: cleaning, maintenance, and performance-enhancing. 2. Reasons for Use: Traditional solutions involve disassembling the engine for cleaning, which is not only time-consuming but also risky, especially with advanced turbocharging and GDI technologies making engines more precise. Disassembly and cleaning may lead to numerous subsequent issues. Therefore, carbon removers for fuel systems (fuel additives) that allow cleaning without disassembly have gradually become a necessary method for removing carbon deposits.
114
Share

How Serious Is It to Scrape the Car's Undercarriage?

If important parts are not scraped, then there is no problem. If important parts are scraped and the damage is severe, it is recommended to take the car to a repair shop and have it lifted with a jack for inspection. For front-engine cars, the more important components are located at the front. There are two placement methods for front engines: one is transverse, and the other is longitudinal. Relevant information about the car's undercarriage is as follows: 1. Introduction: The car's undercarriage consists of four parts: the transmission system, the running system, the steering system, and the braking system. The function of the undercarriage is to support and install the car's engine and its various components and assemblies, forming the overall shape of the car, receiving the engine's power to make the car move, and ensuring normal driving. 2. Maintenance details: In winter, to maintain the undercarriage, thorough cleaning and rust-proof treatment should be carried out. First, the undercarriage must be thoroughly cleaned. If there is excessive mud and dirt on the undercarriage, a degreasing cleaner should be used to wash it once, revealing the undercarriage's original "natural color," so that rust-proof treatment can begin.
103
Share

Does the Roewe RX5 support CarPlay?

Roewe RX5 supports CarPlay. CarPlay is an in-car system launched by Apple Inc., which seamlessly integrates users' iOS devices and iOS experience with the dashboard system. Nowadays, many car models support the CarPlay system, enabling hands-free control of the car's multimedia functions through voice commands. Here is an introduction to CarPlay: 1. Performance: In terms of performance, the emergence of CarPlay is of epoch-making significance. Since then, in-car displays will no longer leave an impression of being ugly and clumsy; the operation of CarPlay will give people a refreshing feeling. 2. Future: In terms of the future, CarPlay will become the core of automobiles. One day, CarPlay may even replace the autonomous driving function of cars.
102
Share

How to Remove and Install the Rear Seats of the Qashqai?

Method for removing and installing the rear seats of the Qashqai: Before removal, pull the edge of the rear seat cushion and lift it forcefully to create a gap in the car seat. Use a flashlight to locate a clip, then insert the removal tool into the middle of the clip and push it in about 4cm. Press down firmly, and the seat cushion will be lifted. Repeat the same process for the clip on the other side, and the car seat will then be removed. To install the seat, align the clips on the seat. First, insert the inner tongue of the seat cushion, then align it with the pulled-out clip and press down firmly. A clicking sound indicates that the seat is properly installed. The Qashqai has body dimensions of 4315mm in length, 1783mm in width, and 1606mm in height, with a wheelbase of 2630mm. It features front-wheel drive and has a fuel tank capacity of 65 liters.
106
Share

What are the differences between Civic and CIIMO?

CIIMO and Civic mainly have the following differences: 1. CIIMO is built on the basis of the eighth-generation Civic. To distinguish it from the older domestic Civic, CIIMO adopts the exterior design of the Japanese eighth-generation Civic. There are significant differences in the design of the headlights and taillights compared to the older Civic. CIIMO features a new independent brand logo, and the rear also displays the English name CIIMO. 2. In terms of body dimensions, CIIMO is not entirely identical to the domestic eighth-generation Civic. The body length is increased by 45mm, while the width, height, and wheelbase remain unchanged. It is expected that the interior space will be basically the same as the older Civic.
105
Share

What is the difference between 1.5l and 1.5t?

1.5l and 1.5t differ in their engines: a 1.5l car has a naturally aspirated engine, while a 1.5t car has a turbocharged engine. The function of an engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing the gas to expand and push the piston to perform work. The engine consists of: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. Methods for engine maintenance include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning the radiator scale; 4. Regularly removing engine carbon deposits; 5. Regularly replacing the car's three filters; 6. Maintaining a reasonable engine speed.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.