How to Remove the Rear Seat of the Verna?

[LeLola]

To remove the rear seat of the Verna, follow these steps: 1. Locate the pull strap in the middle of the rear backrest, pull it sideways and flip it upwards to lift the rear seat; 2. After lifting the rear seat, place it in the rear of the car and remove the left hook; 3. Near the door side of the backrest, there is a release mechanism—press it and pull downward to detach the rear seat. The Verna is positioned as a compact car with body dimensions of 4300mm in length, 1705mm in width, 1460mm in height, and a wheelbase of 2570mm. It is equipped with a 1.4L naturally aspirated engine, delivering a maximum power of 70kw and a peak torque of 132.4nm.

[Brian]

As a DIY-savvy car owner, I believe removing the Verna's rear seats should be done step by step. First, locate the front edge of the seat cushion where it meets the backrest. Feel for the clip positions by hand, then grasp both sides and lift vertically upward with force until you hear a click indicating release. The entire cushion can then be easily removed. If the backrest section has securing bolts, use a small wrench to unscrew them. Be careful not to use excessive force during removal to avoid damaging the clips, as loose fittings during reinstallation would be problematic. I once removed them for carpet cleaning - it made vacuuming hidden dust in rear seat crevices particularly convenient. Reinstallation is simple: align and press until you hear the locking click. The entire process takes about 5-10 minutes, requires no professional tools, but demands careful handling. For first attempts, I recommend consulting the owner's manual or checking online videos for model-specific details.

[OliviaMarie]

From my experience, disassembling the rear seats of the Verna isn't as difficult as it seems—the key lies in the sequence of operations. First, lift the front part of the seat cushion and locate the clips, then pull upward firmly to unlock them. Once the cushion is completely loose, it can be removed. Check if there are hooks or bolts securing the backrest; if so, unscrew the small bolts. After removal, the interior space opens up significantly, making it much easier to clean out debris or add seat covers. Keeping dust accumulation minimal also improves hygiene. A word of caution: avoid yanking forcefully to prevent plastic clips from breaking, as replacements can be troublesome. Always perform the operation on level ground with the doors closed for safety. When reinstalling, simply align and press gently for a secure fit. I've tried it several times and found that learning this DIY maintenance is simple, cost-effective, and enhances cabin comfort.

[Elliana]

Before attempting disassembly, I always confirm the safety points. The rear seat cushion of the Verna is secured by clips; lifting the front edge firmly will release it. The backrest section requires checking for bolts. Apply moderate force to avoid damaging the components. Disassembly allows for more thorough interior cleaning, but avoid using tools to pry the trim during the process. When reinstalling, ensure the clips lock into place, and after seating, test for any looseness by shaking.

[MadelynRose]

Removing the Verna rear seat is straightforward: lift the front of the cushion upwards to release the clips and remove the cushion, then check for bolts at the back and unscrew if present. Hands or a small wrench will suffice. This makes cleaning or modifications easier, allowing for interior dust removal to prevent odors. When reinstalling, align and secure properly. Avoid using excessive force to prevent scratching the car. The process is simple and suitable for trying at home.

[AlejandroRose]

I frequently remove the rear seats for routine car maintenance. The Renna seat cushion clips are located at the front of the seat—just lift firmly to release and remove them. The seat back may require bolt removal. Afterward, vacuuming or inspecting wear points becomes convenient, such as checking for water accumulation or rust. A quick tip: Close the car doors before removal to prevent accidental contact, and ensure clips are properly aligned during reinstallation for secure fastening. This simple task keeps the interior cleaner and more aesthetically pleasing.