···
Log in / Register

How to Remove the Full Vehicle Maintenance Reminder on Chery Cars

6Answers
BrandonDella
07/29/2025, 09:55:20 AM

Methods to remove the full vehicle maintenance reminder on Chery cars: 1. Insert the car key, press and hold the small button on the right (the small black lever on the dashboard for adjusting time and resetting mileage), then turn the key to the ON position (note: do not start the engine); 2. Keep holding the small button for a few seconds before releasing; 3. Press and hold the small button again, rotate it to the right once, then release to successfully remove the full vehicle maintenance reminder. Taking the 2016 Chery Fulwin 2 as an example, its body dimensions are 4188mm in length, 1686mm in width, and 1480mm in height, with a wheelbase of 2527mm. This model is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 80kW and a maximum torque of 140Nm, paired with a 5-speed manual transmission.

Was this review help?
109
Share
StLaila
08/13/2025, 01:27:02 AM

Last time I was driving my Chery, that annoying vehicle maintenance reminder kept popping up, so I learned how to handle it myself. The general method is to first close all the doors, insert the key but don’t turn it to the ignition position, like the ACC position. Then, look for a button combination near the steering wheel—usually holding down the Trip reset button for about ten seconds until the warning light on the dashboard goes off or the menu shows a successful reset. Methods vary a lot between different models. Pre-2018 models might rely on buttons, while newer ones like the Tiggo series have settings in the central control screen. After resetting, schedule maintenance as soon as possible—don’t delay too long. A car is like a body; it needs regular check-ups and oil changes. If you forget the steps, you can check online for video tutorials shared by other owners on forums or simply refer to the manual. If all else fails, visit a professional shop to avoid messing up the dashboard system and locking other functions.

Was this review help?
12
Share
Expand All
VonBrooke
10/10/2025, 02:05:02 AM

Bro, my Chery keeps popping up the maintenance reminder, and it's driving me crazy! The method to turn it off is actually quite simple: it's usually in the vehicle settings menu or via button operations. For example, don't start the engine while driving, just press and hold the MODE button or the small button on the left side of the steering wheel for a few seconds. I've checked online for common practices: turn off the engine, turn the key to the ON position without starting, then press a button combination and it should work. Remember, don't ignore that reminder—regular maintenance keeps your car running smoothly. If you can't figure it out, don't force it; just take the manual to the 4S shop and a technician will fix it in seconds. Each model has different operations, but the manual is the bible. Download the PDF version and browse through the chapters—you might also learn other function setting tips. Safety first for a more secure drive.

Was this review help?
7
Share
Expand All
MollyLee
11/23/2025, 02:14:25 AM

The maintenance reminder pop-up can be annoying, but it's not hard to disable: Generally, insert the key to the ACC position, then hold down a specific button combination on the instrument panel for 5-10 seconds. Remember, the reminder serves an important purpose—don't just turn it off and forget about maintenance. Check your manual for the exact steps or look up online tutorials with diagrams to confirm any model-specific differences. After handling it, promptly schedule a service station visit for an oil change and inspection.

Was this review help?
13
Share
Expand All
OCamilla
01/13/2026, 03:50:19 AM

The vehicle system's maintenance reminder is an intelligent alert, and the reset method varies by model. First, sit in the car and turn off the engine, then rotate the key to the ACC position without starting it. Depending on the model: older Chery models may require button combinations like Trip+Set; newer models use the infotainment screen menu to find the vehicle settings and enter the reset option. After completion, do not delay maintenance, as the core components of the car rely on regular servicing to extend their lifespan. For different models, it is recommended to refer to the manual or website guide to ensure accurate operation.

Was this review help?
9
Share
Expand All
AylaDella
04/10/2026, 12:16:55 AM

The maintenance reminder is a friendly prompt; don't rush to dismiss it. The reset method usually involves button operations: turn off the engine, rotate the key to the ON position without starting, then press a button near the steering wheel, such as the Reset or OK button, for a few seconds until the light goes off. If it doesn't work after trying, avoid forcing it repeatedly—the dashboard might get confused. It's safer to take it to a professional repair shop where they can quickly reset it using a diagnostic computer. Also, emphasize the purpose of maintenance: regular oil and filter changes ensure the car's health, making driving safer and more fuel-efficient. Delaying it may lead to costly repairs later.

Was this review help?
12
Share
Expand All
More Q&A

How to reset the tire pressure on Maxus G10?

Maxus G10 tire pressure monitoring reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally the dashboard warning light will turn off, completing the tire pressure reset. The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no stamp on top, four small spikes at the bottom, and an exclamation mark inside. The tire pressure monitoring indicator light indicates abnormal tire pressure. Abnormal tire pressure generally has the following three causes: Tire pressure abnormality: Generally, an alarm will sound when the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, the tire pressure reset was not performed in time, causing the tire pressure monitoring system to still record the previous data, and the tire pressure monitoring indicator light will remain on. In this case, simply perform a tire pressure reset. Tire pressure sensor damage: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged by impact while driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only a new replacement part can be used.
119
Share

Does the Porsche 911 Have 4 Seats?

The Porsche 911 series, except for the Turbo and GT2 models, features two doors and four seats. Here is some relevant information about the Porsche 911: 1. Model History: It is a sports car produced by Porsche AG in Stuttgart, Germany, designed by Ferdinand Alexander Porsche. 2. Model Overview: Since its debut in 1963, it has gone through seven generations, renowned worldwide for its unique style and excellent durability. The Porsche 911 series is one of the most legendary models in the entire Porsche lineup and even in the world, as well as one of the representative models of mid-rear-engine sports cars.
103
Share

What is the method to find the first reference point for right reverse parking?

Finding the first reference point for right reverse parking is as follows: Align the left and right rearview mirrors with the right starting line. Below are the details regarding right reverse parking: 1. Definition: Finding reference points refers to identifying specific visual markers during the reverse parking process to perform certain actions. Whether it's right or left reverse parking, reference points are essential for successful parking. 2. Precautions: Failing to follow the designated route or sequence during reverse parking will result in disqualification. Additionally, situations such as the vehicle body crossing the line, incomplete parking, or not evenly driving both front tires over the control line will also be considered as failures.
109
Share

Where is the car first aid kit generally located?

First aid kits are usually placed in the trunk or inside the spare tire compartment, and car owners can prepare one according to their needs. Generally, ordinary cars do not come with them, while high-end vehicles may include one. Below is a detailed introduction to automotive first aid kits: 1. Automotive first aid products are divided into car first aid kits and car first aid boxes. There is a type of car emergency headrest used in vehicles abroad, which also falls under the category of car first aid kits. Additionally, there are car emergency kits, which have a broader scope. 2. The main purpose of car first aid kits is for vehicles, including common cars, buses, public transport vehicles, trucks, and even electric bikes and bicycles. Currently, the popularity of first aid kits is very high in many developed countries, where they are often considered standard equipment for vehicles, with relevant regulations systematically governing their use. 3. Vehicles should be equipped with first aid products in at least two locations. Near the driver's seat, automotive first aid supplies such as a car first aid kit or box should be placed. These do not need to be large and can be stored in the door storage space, center console, or the storage box in front of the passenger seat. The primary function of the first aid kit here is for stopping bleeding and bandaging (such as gauze, bandages, hemostatic powder, hemostatic forceps, etc.), with other functions being secondary.
118
Share

Is it necessary to cover a new car with a car cover when parked outdoors?

It is necessary to cover a new car with a car cover when parked outdoors, as it can prevent various accidents. During heavy rain or sandstorms, a car cover can protect the new car's paint from corrosion. Additionally, it can prevent scratches caused by mischievous children. When covering the car, it is best to wait until the vehicle has completely cooled down before proceeding. After the car is turned off following a drive, the temperature of the vehicle does not drop instantly. Covering the car immediately can cause localized temperature increases under the cover, leading to higher humidity and poor air circulation inside the cover. Functions of a car cover: Protection against harsh weather: The primary purpose of a car cover is to shield your beloved car from dust, intense sunlight, rain, corrosion, and more. It provides excellent protection for your vehicle. In case of bad weather, such as heavy rain or windy and sandy conditions, covering your car with a car cover can effectively prevent the harsh weather from corroding the car's paint. Preventing scratches from mischievous children: Another benefit is preventing scratches from mischievous children. When parking temporarily in a residential area or by the roadside, you might return to find the car covered in scratches, with the children already gone. This situation often requires checking surveillance footage or engaging in disputes, making it quite troublesome to resolve. Using a car cover can prevent such incidents, as children will only see a large piece of fabric rather than a beautifully styled car.
106
Share

Why Does a New Car Make Noise When Braking?

Because the brake discs and pads of a new car are still in the break-in period, they may produce unusual noises when braking. Below is some relevant information about new car brake discs and pads: 1. Replacement cycle for brake discs and pads: Both brake discs and pads are high-wear items. Every time you brake, these two components rub against each other, leading to natural wear over time. When the wear becomes excessive, unusual noises will naturally occur, so regular inspection and replacement are necessary. Typically, brake pads should be replaced every 60,000 to 80,000 kilometers, while brake discs should be replaced every 100,000 to 120,000 kilometers. 2. Maintenance of brake discs and pads: Situations such as prolonged parking, humid climates, or rainy weather can cause some rust or dirt to form on the brake discs or pads. To maintain the brake discs and pads effectively, keep the car in regular driving condition, or apply butter or specialized lubricating oil to the connection points between the brake pads and brake calipers.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.