···
Log in / Register

How to Refuel a Motorcycle in LifeAfter?

6Answers
JosieMarie
09/01/2025, 12:37:36 AM

Motorcycle refueling can be done directly at gas stations. Please note that making phone calls and using open flames are prohibited during refueling. After payment, scan the barcode at the fuel dispenser, press the button to select the fuel type, scan the barcode again, then remove the nozzle to begin refueling.

Was this review help?
110
Share
SarahLynn
09/13/2025, 03:22:15 AM

Lately, I've been riding motorcycles in the game every day to explore the map, so I'm very familiar with refueling. After returning to camp on the bike, head straight to the [Material Processing Bench] and look for the gasoline option. Note that this can only be unlocked and crafted through camp technology—you can't make it yourself! Once you have gasoline, open the motorcycle's property interface. There's a '+' button next to the fuel tank icon in the bottom right corner—click it to refuel. The system will also pop up a reminder when fuel is running low. Make sure to refill before the tank is completely empty, or you might stall halfway and get chased down by infected. Always stock up on nitre and wood; crafting gasoline requires 5 nitre and 20 wood per bottle, which is enough to cover a good portion of the map.

Was this review help?
5
Share
Expand All
BraxtonMarie
10/27/2025, 04:09:13 AM

Last time my motorcycle broke down halfway, that's when I finally understood the refueling mechanic. You simply can't find gas stations in the game - the key is to first research gasoline technology at the camp (check progress at the camp management console). After unlocking it, all camp members can craft gasoline at the material processing station, with resource consumption similar to food production. The fuel tank status can be viewed in the vehicle garage interface - the gray bar indicates an empty tank. Here's the crucial part: You must be near your garage manager NPC to operate the refuel button! Click the fuel can icon in the lower right corner of the motorcycle info page to directly consume gasoline cans from your backpack. If you run out of fuel in the wild, you'll have to painfully choose to recycle - the motorcycle will disappear but some parts will be returned.

Was this review help?
14
Share
Expand All
VonBentley
12/10/2025, 03:25:09 AM

It wasn't until reaching the seventh manor that I finally figured out the tricks to refueling motorcycles. Three key points: First, gasoline can only be produced at the camp (requires unlocking in the tech tree), individuals can't make it themselves; Second, refueling must be done at Happy 101 or your own camp's garage administrator; Third, open the vehicle interface to find the corresponding motorcycle, there will be a 'Fill' button next to the fuel gauge (it turns red when out of fuel). One bottle of gasoline fills about 30% of the tank, and the nitre consumption is quite high. It's recommended to donate more materials at the camp to unlock premium gasoline, which can increase range by 40%. When riding normally, don't hold down the accelerate button continuously - releasing it when going uphill saves fuel.

Was this review help?
3
Share
Expand All
DiTyler
01/30/2026, 09:44:09 PM

Just helped a newbie with refueling yesterday. The game mechanics are quite unique: First, you need camp permissions, then have the mayor research gasoline production (takes about 2 hours). For crafting, select the fuel category at the material processing bench, consuming nitre and wood. Key steps: 1. Return to camp and find the garage NPC 2. Open 'Vehicle Management' 3. Select motorcycle and click details 4. Tap the '+' next to the fuel gauge 5. Automatically consumes gasoline from backpack. Fuel level has four indicators - prepare to refuel when it turns yellow. Note for motorcycle modders: Engine modification parts affect fuel consumption, with tier-3 engines consuming 20% more than stock!

Was this review help?
20
Share
Expand All
McJaxson
04/25/2026, 03:33:15 PM

Motorcycle Refueling Mechanism Tested: Return to the camp and open the [Material Processing Bench] to craft gasoline bottles (visible after research). The materials require a large amount of nitre and wood. Refueling requires three steps: first, find the camp garage manager, open the vehicle interface and select the motorcycle, then click the fuel can icon to fill. One 500ml gasoline bottle refuels 30% of the tank capacity, which can be increased to 45% with a modified fuel tank. For long-distance trips, carrying three bottles in your backpack is safer. Fun fact: Motorcycles consume 15% more fuel in snow and swamp terrains, but 10% less on sandy or rocky ground. If you force-recover the motorcycle when it runs out of fuel, it will lose 10% durability—this mechanic is frustrating, so it’s best to return to the city as soon as the low-fuel warning turns red!

Was this review help?
7
Share
Expand All
More Q&A

What are the steps for bleeding the ABS pump after replacement?

The bleeding sequence is: right rear wheel, left front wheel, left rear wheel, right front wheel. Unscrew the reservoir cap and fill it with brake fluid. Be careful not to spill brake fluid on the paintwork. If any spills occur, clean it immediately. Connect the bleed tube to the brake wheel cylinder's bleed port, with the other end inserted into a container holding some brake fluid. Connect the Hi-Scan diagnostic tool's plug to the diagnostic socket. Press the "YES" key to operate the return pump rotation and close the solenoid valve. Press the "YES" key to begin bleeding. Note: The motor should not run for more than 60 seconds to prevent damage.
104
Share

How should a motor vehicle be driven through a flooded bridge?

When passing through flooded roads or bridges, you should stop to assess the water conditions. The vehicle must proceed slowly with a designated person leading the way in front. Entering flooded road surfaces blindly can lead to unclear road conditions and cause the vehicle to drive off the road. Drive at a low speed and in a low gear, maintaining steady and even speed. Avoid driving fast in water. Aim for a continuous and steady passage to avoid stopping in the water. Regardless of the situation, the driver should focus on driving the vehicle, look straight ahead, and keep an eye on the road in front without looking around.
115
Share

How many seconds does the Camry take to accelerate from 0 to 100 km/h?

Camry accelerates from 0 to 100 km/h in 8.3 seconds. Significance of 0-100 km/h acceleration: 0-100 km/h acceleration refers to the time taken to accelerate from 0 to 100 km/h, which is the most intuitive reflection of a car's power. Generally, 1.6L compact cars achieve 0-100 km/h acceleration in 11 to 13 seconds, 2.0T mid-size cars in 7 to 8 seconds, while supercars mostly complete it in less than 3.8 seconds. 0-100 km/h acceleration testing: Manufacturers usually indicate the official 0-100 km/h acceleration time in the vehicle's promotional materials, but actual test results often differ from the official figures. This is because different environmental temperatures, road conditions, vehicle wear conditions, and even the amount of remaining fuel in the tank can affect the test results. Therefore, no two acceleration test results are exactly the same.
101
Share

What does d4st Toyota mean?

Toyota's d4st refers to the use of a four-stroke dual-injection turbocharged engine, where 'd' stands for dual injection system, 't' represents turbocharging, and '4' denotes four-stroke. Definition of a four-stroke engine: A four-stroke engine means that the engine crankshaft rotates twice, going through four strokes—intake, compression, power, and exhaust—to complete one working cycle, whereas a two-stroke engine only requires the crankshaft to rotate once, completing a cycle with two strokes. D4S principle: D4S dual-mode fuel injection. Unlike other manufacturers' pure direct injection, D4S combines both direct injection and port injection. During cold starts and low-load conditions, port injection allows for better fuel mixing and helps clean the intake tract, preventing carbon buildup and dirt accumulation in the intake and valves. At medium loads, direct injection begins to intervene, while at high loads, only the direct injection system is active. This dual-injection system combines the advantages of both port and direct injection.
103
Share

Is the Buick Excelle a Three-Cylinder or Four-Cylinder Engine?

The number of cylinders in the Buick Excelle depends on the engine displacement: the 1.3L turbocharged engine is a three-cylinder; engines above 1.5L are naturally aspirated four-cylinder engines. Definition of a Three-Cylinder Engine: A three-cylinder engine is an engine composed of three cylinders. Inside, three identical single cylinders are arranged on a single block sharing a common crankshaft to output power. Its main function is to convert chemical energy into mechanical energy, providing power for traditional fuel vehicles and new energy hybrid models. Differences Between Three-Cylinder and Four-Cylinder Engines:
104
Share

How to Check the Remaining Kilometer Range of Fuel in the Teana?

Divide the amount of fuel by the number of kilometers to determine the fuel consumption per kilometer, then multiply by 100 to get the fuel consumption per 100 kilometers. There is an information viewing button on the left lever of the steering wheel. A rotating button on the lever allows you to select information to view. After entering, check the remaining fuel and perform the calculation.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.