How to Read an Automotive Refrigerant Pressure Gauge?

Is it necessary to change the license plate when changing cars?

Changing cars requires changing the license plate. The following is the relevant introduction about license plates: 1. Function of license plates: License plates are used for numbering and information registration of vehicles. Their main function is to identify the region to which the vehicle belongs through the license plate, and the owner of the vehicle as well as the registration information of the vehicle can also be traced based on the license plate. 2. Classification of license plate colors: Large civilian vehicles have yellow plates with black characters. Small civilian vehicles have blue plates with white characters. Embassy foreign vehicles have black plates with white characters and a red "Embassy" character mark. Consulate foreign vehicles have black plates with white characters and a red "Consulate" character mark. Other foreign vehicles have black plates with white characters. Test vehicles have blue plates with white characters, with the character "Test" before the numbers. Learner vehicles have blue plates with white characters, with the character "Learner" before the numbers. Temporary plates have white background with red characters, with the characters "Temporary" before the numbers. Coach vehicles have yellow plates with black characters, with the character "Learner" after the numbers. Replacement plates for vehicles have white plates with black characters.

106

Share

What Causes Brake Lock-Up?

Failure to install ABS, brake caliper not returning to position, master cylinder cup sticking and not returning, and static wheel placement can all lead to brake lock-up. Below is more information about wheel lock-up: 1. Introduction: Tire lock-up refers to the sudden locking of brakes when the brake pedal is pressed, causing the vehicle to lose steering capability, typically occurring in vehicles without ABS anti-lock braking systems. 2. Phenomenon: In cars without ABS, if the brake pedal is pressed hard while driving, the wheel speed rapidly decreases. When the braking force exceeds the friction between the wheel and the ground, the wheel locks up. A fully locked wheel increases the friction between the tire and the ground, potentially leading to skidding and loss of control under significant inertia. If the front wheels lock up, the driver cannot control the vehicle's direction. If the rear wheels lock up, skidding is more likely to occur. 3. Main Hazards: Wheel lock-up is primarily caused by excessive braking force between the brake pads and the disc or drum. However, due to the vehicle's high inertia, it continues moving forward, with the tires sliding rather than rolling, preventing directional changes and potentially causing accidents. Even with low inertia, on crowded or high-traffic roads, if following too closely, sudden stop due to wheel lock-up can easily result in rear-end collisions. If the front wheels lock up before the rear wheels, the car loses steering ability, making it impossible to change direction. If the rear wheels lock up before the front wheels, it can cause skidding.

101

Share

What is the reason for the left side being too wide when reversing into the garage?

Reversing into the garage with the left side too wide is due to failing to control the distance between the car body and the garage corner. The solution is to turn the steering wheel to the left. The degree of turning depends on the progress of reversing. If the rear of the car is close to the end of the garage, turn the steering wheel more. When the rear of the car starts to lean to the left, straighten the steering wheel to align the car body. When entering the garage, you can predict whether the car body will cross the line by observing the position between the car body and the left garage corner through the left rearview mirror. If the distance between the car body and the garage corner is too narrow when continuing to reverse in the current direction, turn the steering wheel halfway to widen the distance. After widening the distance, turn the steering wheel fully to the left again, and the bottom corner will immediately align. Here are some operation tips for reversing into the garage: Control the driving speed by using first gear or reverse gear at idle speed throughout the process. Control the timing of steering. During reversing, observe carefully, grasp the key points of steering, and steer at the right time. Control the driving route. The car's driving route mainly depends on the speed of turning the steering wheel and the driving speed. When reversing, aim at the sideline and adjust the direction in time to keep the car straight.

107

Share

What should be noted when driving in summer?

It is not recommended to fill up the fuel tank in summer. The hazards of filling up the fuel tank in summer are as follows: 1. Fuel leakage can easily cause fires: The fuel at gas stations is stored underground, where temperatures are lower. Especially in hot summers, due to thermal expansion and contraction, if the tank is filled too full, fuel may overflow from the vent hole. 2. Blocking the vent hole: Once the vent hole is blocked, negative pressure will form inside the fuel tank, leading to poor fuel supply or even a complete failure to supply fuel. 3. Harm to the carbon canister: The carbon canister is usually installed between the fuel tank and the engine. Since gasoline is a volatile liquid, the fuel tank is often filled with vapor at normal temperatures. The fuel evaporation emission control system works by directing the vapor into the combustion process and preventing it from escaping into the atmosphere. The activated carbon canister storage device plays a crucial role in this process. If the tank is filled too full, liquid gasoline instead of vapor enters the carbon canister, which can cause damage to it. 4. Gasoline vapor can be carcinogenic: The activated carbon canister is generally located near the fresh air intake for the cabin. When the tank is filled too full, the carbon canister becomes saturated, and excessive pressure causes it to release vapor. Air containing gasoline components enters the cabin, which can inevitably harm the passengers' health.

119

Share

How Many Seats Does a Class 1 Vehicle Have?

A Class 1 vehicle refers to sedans, minibuses with 7 seats or fewer, and small trucks with a load capacity of 2 tons or less. Below is extended information on vehicle classifications: 1. Class 2 vehicles: Buses with 8 to 19 seats, and trucks with a load capacity above 2 tons up to 5 tons (inclusive). 2. Class 3 vehicles: Buses with 20 to 39 seats, and trucks with a load capacity above 5 tons up to 10 tons (inclusive). 3. Class 4 vehicles: Buses with 40 seats or more (inclusive), and trucks with a load capacity above 10 tons up to 15 tons (inclusive). 4. Class 5 vehicles: Trucks with a load capacity above 15 tons. 5. The difference between Class 1 and Class 2 vehicles: Sedans, minibuses with 7 seats or fewer, and small trucks with a load capacity of 2 tons or less are classified as Class 1 vehicles, while buses with 8 to 19 seats and trucks with a load capacity above 2 tons up to 5 tons (inclusive) are classified as Class 2 vehicles. Additionally, Class 1 vehicles have a front height of less than 1.3 meters, which is why minibuses are defined as Class 2 vehicles. The toll standards for Class 1 and Class 2 vehicles on toll roads will continue to follow the Ministry of Transport's industry standards, uniformly divided into five classes, from Class 1 to Class 5, with the toll price conversion coefficient increasing sequentially. The toll price conversion coefficient for Class 1 vehicles is 1, and for Class 2 vehicles, it is 2.

112

Share

What to Do When Unable to Accurately Judge Reference Points During Reverse Parking?

Adjusting the seat properly and finding suitable reference points are essential for judging reference points accurately. Here are some operation tips for reverse parking: 1. Control the speed: Maintain a consistent speed throughout the process using 1st gear or reverse gear at idle speed. The speed at which you start should be the speed you maintain. 2. Control the steering: Pay close attention during the reversing process, grasp the critical points for steering, and turn the wheel at the right moment. 3. Control the steering wheel: The car's path during the test mainly depends on the speed of turning the steering wheel and the driving speed. When reversing, accurately observe the side lines and promptly correct the direction to ensure the car enters the parking space straight.

106

Share

How to Read an Automotive Refrigerant Pressure Gauge?

Is it necessary to change the license plate when changing cars?

What Causes Brake Lock-Up?

What is the reason for the left side being too wide when reversing into the garage?

What should be noted when driving in summer?

How Many Seats Does a Class 1 Vehicle Have?

What to Do When Unable to Accurately Judge Reference Points During Reverse Parking?

Is It Mandatory to Enter the Left-Turn Waiting Zone?

Are the Last 10 Questions in Subject 4 Multiple-Choice?

Which type of engine oil is suitable for Changan CS55?

Why Do Drum Brakes Lock Up When It Rains?