···
Log in / Register

How to Perform Vehicle Annual Inspection on Mobile Phone?

6Answers
BradleyMarie
07/29/2025, 12:25:43 AM

Log in to the "Traffic Management 12123" mobile app, after entering the homepage, click "More", and find the "Exemption Vehicle Inspection Mark Application" function in the motor vehicle service center. Select the motor vehicle that needs to apply for the inspection mark, read the "Service Instructions" and click "Read and Agree". After entering the information confirmation page, verify the relevant information, and click "Next" if there are no errors. Fill in the mailing address, click "Next"; confirm the relevant information again, and submit if there are no errors. After completing the submission, the system will review it within one working day, and generally, the new inspection compliance mark can be received in about 3 days.

Was this review help?
106
Share
LilahFitz
08/12/2025, 12:42:17 PM

I used my phone to handle the vehicle annual inspection before, and it was incredibly convenient. First, download the official app like Traffic Management 12123, then register and bind my license plate number. Open the app, select the annual inspection service, and upload the vehicle insurance policy and ID card photos. After paying the fees, the system automatically arranges a testing site, so I don’t have to queue up. The time saved allows me to watch two more episodes of my favorite show! Make sure your vehicle has no outstanding violations, or you’ll get stuck at the first step. The whole process takes just a few minutes, and the results are notified via SMS. If you forget to prepare the required documents, check the app’s prompts in advance to avoid rework. Modern technology is so handy—it’s the preferred method for young people, and I highly recommend it.

Was this review help?
9
Share
Expand All
HopeLynn
10/02/2025, 10:57:59 PM

As a parent who often drives to pick up my kids, handling the annual vehicle inspection on my phone has freed up more time to spend with them. Specifically, I log into the local transportation app, select the annual inspection appointment module, and enter the license plate number and owner information. The system then generates an inspection time slot, and all I need to do is pay a small service fee. That day, I managed to complete the process while cooking, saving me half a day of free time. The key is that the app reminded me to check the vehicle's lights and brakes before the inspection deadline to avoid any on-site issues and extra hassle. Once completed, the electronic inspection sticker is directly stored on my phone, ready to be displayed anytime. The entire process is seamless, worry-free, and effortless.

Was this review help?
6
Share
Expand All
Rhonda
11/15/2025, 11:37:39 PM

Using a mobile phone for annual vehicle inspection is incredibly simple, with the key being the efficient handling through APP integration features. After downloading and registering, enter the inspection process: first scan the vehicle's VIN code to confirm identity, then select the nearest inspection station via location services. Payment can be conveniently made through e-wallets like WeChat Pay. The system automatically syncs traffic violation records and insurance status, eliminating the hassle of manual checks. Afterwards, you'll receive a reservation code—just drive over at the scheduled time for direct inspection. The report is then pushed to the APP for archiving post-inspection. This digital approach minimizes human error and is perfect for those who prefer convenience.

Was this review help?
15
Share
Expand All
MacJustin
01/06/2026, 01:14:22 AM

My schedule is packed, so handling vehicle annual inspections on my phone is my efficient solution. Just open the traffic app, select the annual inspection service, enter the license plate number, upload ID photos, and pay the fee. The system processes quickly, confirming the inspection station and date in minutes. This avoids the hassle of taking time off for errands. Check the app in advance to see if your vehicle meets standards, such as tire wear or lighting issues, so you can fix them early and save trouble. Upon completion, the electronic certificate updates automatically, and you can check historical records anytime. The entire process is seamless and digital—highly recommended for busy professionals.

Was this review help?
20
Share
Expand All
SophiaRose
04/03/2026, 12:40:52 AM

Having driven for over a decade, I can confirm that mobile vehicle inspections are now much more reliable. First, download the official app, register and bind your vehicle, then select the inspection appointment and upload your insurance documents. After payment, the system assigns your case to a partnered service station. Crucially, the app reminds you in advance what needs checking, like exhaust emissions or brake discs, ensuring a one-time pass without rework. The electronic inspection mark becomes valid immediately upon completion, with records stored long-term on your phone. This method cuts down on queue times and avoids errors from manual form-filling offline. In short, it's secure and dependable—experience tells me preparing materials a week in advance is the safest approach.

Was this review help?
6
Share
Expand All
More Q&A

Why is the Mazda i-stop yellow light flashing continuously?

The reason why the Mazda i-stop yellow light keeps flashing: The auto start-stop system has been turned off and cannot function normally. Below is relevant information about Mazda i-stop: 1. Principle: The principle of Mazda i-stop is similar to that of engine auto start-stop. By equipping a traditional engine with an enhanced motor featuring idle start-stop functionality, the engine completely shuts off when the vehicle meets idle stop conditions. When needing to move again, the idle start-stop motor quickly responds to the driver's start command, rapidly restarting the engine to reduce fuel consumption and exhaust emissions. 2. Usage method: Under normal circumstances, the i-stop system is enabled by default (green when on, yellow when off). When the vehicle comes to a temporary stop, the engine automatically shuts off. Pressing the accelerator will restart the engine normally. For the issue of the i-stop yellow light, simply reactivating the i-stop system can serve as a basic troubleshooting step.
112
Share

What's the reason for the H6 one-button start not working?

Haval H6 one-button start failure may be due to the following reasons; 1. Radio wave interference: Frequently placing the car key near electronic devices such as mobile phones, computers, TVs, etc., can cause interference with the low-intensity radio waves in the key. Alternatively, if there are strong radio waves nearby, such as from TV towers, airports, power plants, etc., the one-button start may experience a "failure" phenomenon. 2. Car key battery depletion: If the key shows signs like reduced remote control distance or decreased sensitivity, it's a warning that the key battery is running low. In a depleted state, the one-button start function cannot operate normally, and the battery should be replaced as soon as possible. 3. Car malfunction: In extreme cases such as fuel system issues, dead battery, or short circuits in electronic components, it is recommended to directly call the 4S store staff for assistance.
120
Share

What is the actual fuel consumption of the Sylphy?

The actual fuel consumption of the Sylphy: the manual transmission model consumes 5.7 liters per 100 kilometers, and the automatic transmission model consumes 6.3 liters per 100 kilometers. The following is a related introduction to the Sylphy: 1. Power: In terms of power, it is equipped with a 1.6L naturally aspirated engine that meets the National VI emission standards, with a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm. The transmission system is matched with a CVT gearbox. 2. Configuration: The new car is equipped with the new NissanConnect super-intelligent system, with an external 8-inch high-definition capacitive touch screen, including functions such as voice control of the vehicle and remote control of the vehicle. Voice control can achieve basic control of the vehicle's online audio-visual entertainment system, all-time online navigation system, Bluetooth phone, driving recorder, and air conditioning through simple dialogue.
101
Share

What is the actual fuel consumption of the Q7 3.0?

For the Q7 3.0 model, when driven by a single driver without air conditioning and under urban congested road conditions, the fuel consumption is approximately 15 liters per 100 kilometers. On suburban roads, it is around 13 liters per 100 kilometers, and on highways or national roads with good traffic conditions, it is about 11 liters per 100 kilometers. Factors affecting fuel consumption: 1. Road conditions: Poor or uneven road surfaces, leading to prolonged driving in low gears, will inevitably increase fuel consumption. 2. Overloading the trunk: Some drivers use the trunk as a storage space, filling it with unnecessary items, which increases the vehicle's weight. The relationship between vehicle weight and fuel consumption is directly proportional; a 10% reduction in weight can lead to a corresponding percentage decrease in fuel consumption. 3. Incorrect driving habits: Improper driving habits have the most significant impact on fuel consumption. During driving, especially in heavy traffic, at traffic lights, or when changing lanes, sudden acceleration and braking are common issues. 4. Insufficient tire pressure: If the tire pressure is too low, rolling resistance increases significantly. Tests show that tire pressure 2 psi (pounds per square inch) below the recommended value can increase fuel consumption by 1%. Additionally, misaligned or excessively worn tires may also increase fuel consumption.
105
Share

What is the fuel tank capacity of the Audi A3 in liters?

The fuel tank capacity of the Audi A3 is 51 liters, as officially announced. Owners who have purchased the Audi A3 can also check this information on the vehicle's configuration sheet. The Audi A3 requires 95-octane fuel, with a fuel consumption of 5.8L per 100 kilometers. A full tank can cover a distance of approximately 879km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level, with additional space from the safe fill level to the tank opening. This extra space accommodates fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening, the actual refueling amount may exceed the marked capacity.
118
Share

What are the standard dimensions for the reverse parking test in Subject Two?

Standard is that the garage width is the vehicle width plus 60 centimeters, and the garage length is the vehicle length plus 70 centimeters, with the road width being 1.5 times the vehicle length. More relevant information is as follows: 1. Subject Two: Also known as the small road test, it is part of the motor vehicle driver's license examination, specifically referring to the field driving skills test. For small vehicles (C1/C2), the test items include five mandatory components: reverse parking, parallel parking, hill start and stop, right-angle turn, and curve driving (commonly known as S-turn). 2. Operation techniques: Maintain a controlled driving speed throughout the test using first gear or reverse gear at idle speed; the speed at start should be maintained throughout. Control the steering timing carefully during reversing, observe attentively, master the key points of steering, and turn at the right moment. Control the driving path effectively; during the test, the vehicle's path mainly depends on the speed of steering wheel rotation and driving speed. When reversing, accurately align with the boundary lines and adjust the direction promptly to ensure the vehicle enters the garage straight.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.