How to Operate Straight Driving at Intersections in Subject 3?

[DiCharles]

Straight driving operation at intersections is as follows: 1. Control speed: Gently press the brake to reduce speed to 16-17 km/h, then release the foot and do not press anything, honk the horn and look left and right, accelerate to 25 km/h after passing the intersection and continue driving. After a certain distance without further instructions, if the road condition is good, you can drive in 4th gear for more than 50 meters, which is required at least once during the whole process. 2. Slow down in advance: Reduce speed before reaching the intersection and pay attention to the traffic lights. If the yellow light is flashing or the red light is already on, slow down and stop without crossing the stop line, quickly shift to 1st gear, and when the green light turns on, start moving after confirming safety by looking left and right, then accelerate and shift up. 3. Look left and right: If the light is green when entering the intersection, still slow down in advance, look left and right to confirm safety, adjust to the appropriate gear matching the speed, and start accelerating and shifting up after passing the intersection.

[Cupid]

I just passed the Road Test (Subject 3), and I feel the straight-through intersection operation was particularly crucial. My instructor taught me to slow down to 20-30 km/h in advance and scan the surroundings: first check the left rearview mirror to confirm no vehicles are tailgating; then sweep the right rearview mirror and blind spot to prevent pedestrians or bicycles from suddenly appearing; finally observe the traffic light ahead and the intersection situation. Throughout the process, maintain lane centering without crossing lines or changing lanes, especially at signalized intersections—lightly press the brake while waiting for the green light and start smoothly when it turns green. The key is to stay relaxed throughout to avoid operational errors caused by excessive tension. After passing, I realized this isn’t just an exam technique but also a great opportunity to develop safe habits—practicing this way during regular driving can reduce accident risks.

[MacDawson]

When I was a young guy taking my driving test, the straight-through intersection in Subject 3 made me quite nervous. The operation itself isn't difficult: prepare 50 meters in advance, slow down to around 25 km/h, and keep checking the surroundings like pedestrians, non-motor vehicles, or other cars. My instructor taught me to observe for 3 seconds: glance left once, right once, and forward once to ensure clear visibility. When going straight, never turn on the turn signal unless changing lanes, otherwise the examiner will deduct points. Remember to stay centered in the lane, lightly press the accelerator, and pass smoothly. After the test, I realized this method is quite practical for daily driving—it helps build alertness. With a few more practices, it becomes easy to handle. The key is not to panic and follow the steps—everything will go smoothly.

[SanStephen]

When going straight at an intersection during the Subject 3 driving test, focus on safety and standardization. Key operations include slowing down to observe, maintaining your lane, and passing through smoothly. Reduce speed to 20-30 km/h within 100 meters beforehand, ensuring visibility in all directions: check traffic flow in the left rearview mirror, scan blind spots for obstacles, and watch for pedestrians on the right. After the green light turns on, hold the steering wheel steadily to avoid sudden turns or lane deviations. The entire process emphasizes anticipating risks and developing habits to enhance road responsibility. This approach ensures passing the test smoothly while promoting safer and more efficient daily driving.

[OBethany]

As an experienced driver, I think the straight-through operation at intersections in Subject 3 is like adding salt when cooking rice—too hasty and it'll burn. The steps include decelerating, observing, and proceeding: release the accelerator in advance to control the speed properly; quickly scan the surroundings three times, keeping an eye on the left, middle, and right; remember not to use turn signals when going straight and keep the car in the middle of the road. During practice, I found that this trains sensitivity to road conditions, which is also applicable at residential area intersections. After repeated practice, the test will naturally become easier—don't let nervousness disrupt your rhythm.

[RemingtonFitz]

It took me several failed road tests to master the key points of going straight at intersections in Subject 3. The operation focuses on details: start decelerating 80 meters in advance, gently braking to reduce speed to 25 km/h; scan the surroundings like radar, paying special attention to blind spots and traffic signals. Keep both hands lightly on the steering wheel, maintain a straight path, and come to a complete stop at red lights. While it seems simple, neglecting observation leads to point deductions. Remembering these core rules helps pass the test and navigate real traffic smoothly, forming good habits to prevent accidents.