···
Log in / Register

How to Operate Self-Service Gas Pump?

6Answers
OVanessa
07/29/2025, 04:27:57 AM

Before self-service refueling, touch the static electricity discharger to eliminate any possible static electricity on your body. Determine the type of fuel you need, insert the fuel card face up into the card slot, and the pump will automatically load the card information. If a password is required, enter it first. After inserting the card, press the desired amount and confirm. Once the selection is made, click the confirm button to start refueling. When performing self-service refueling, pay attention to the following points: 1. First point: Before refueling, remember to touch the hand-shaped icon below the fuel pump to discharge static electricity. 2. Second point: When refueling, gently tap the fuel nozzle against the fuel tank opening to eliminate static electricity. 3. Third point: Do not return to the car during refueling to prevent static electricity from building up again. 4. Fourth point: The fuel nozzle should be inserted as far as possible into the fuel tank opening to reduce the evaporation of fuel vapors during the process. 5. Fifth point: After refueling, wait a moment to ensure no residual fuel is left before removing the nozzle.

Was this review help?
109
Share
Vicki
08/12/2025, 01:25:01 AM

Every time I stop by the gas station after work, I first park the car and turn off the engine, making sure there are no open flames nearby. Then, I get out to swipe my card or prepay with cash at the self-service machine. I select the appropriate fuel grade for my vehicle, such as 92# or 95#, pick up the fuel nozzle, open the fuel tank cap, insert the nozzle, and pull the trigger to refuel until it stops automatically. Throughout the process, I avoid using my phone to prevent static electricity hazards. After refueling, I hang up the nozzle, take my card or receipt, and drive off. This method is convenient, fast, and saves some money, especially during peak hours when self-service is much quicker than full-service. I often recommend friends to try it but remind them to pay extra attention to the instructions during their first use to avoid operational mistakes.

Was this review help?
7
Share
Expand All
KingstonAnn
10/05/2025, 02:28:51 AM

The first time I refueled by myself, I was a bit nervous. As a beginner, I slowly parked, turned off the engine, and studied the machine at the station. Following the prompts, I inserted my bank card, entered the PIN, selected the fuel type, then carefully picked up the nozzle and placed it securely into the fuel tank opening before pressing the switch to start fueling. During the process, the meter clearly displayed the liters and amount until it automatically stopped when full. I then hung the nozzle back, pressed confirm, and took the receipt. The whole process was simpler than I imagined, but safety is paramount—like staying away from fire sources and ensuring the fuel cap is tightly secured. I recommend beginners practice a few times to get comfortable and enjoy the convenience.

Was this review help?
3
Share
Expand All
SanAvery
11/18/2025, 03:00:50 AM

I've been refueling for over a decade and am quite familiar with self-service operations: park the car, turn off the engine, get out, pay, insert card or cash, select the fuel grade (usually 92 to save money), aim the nozzle at the fuel tank, pump until it automatically stops, hang it back, sign the receipt, and leave. The key is to be quick and efficient to avoid long queues. Newcomers should just be careful not to choose the wrong fuel grade—the rest is handled by the machine, saving time and effort. For safety, remember to ensure the trigger is reset before removing the nozzle to prevent dripping.

Was this review help?
20
Share
Expand All
MaximusAnn
01/08/2026, 09:48:53 PM

When taking kids to refuel, I first park the car, turn off the engine, and make sure they're seated properly before operating. At the convenience store, I prepay with cash and choose cost-effective 92-octane gasoline suitable for family cars. I steadily insert the nozzle into the fuel tank and slowly fill up to the specified amount until it automatically stops, then hang it back and take the receipt. Throughout the process, I emphasize safety - keeping children away from static-prone areas, maintaining distance, checking the nozzle for cleanliness and integrity before operation to avoid oil contact. Once accustomed, it becomes worry-free while earning points for discounts.

Was this review help?
10
Share
Expand All
Briella
04/05/2026, 03:03:04 AM

Last self-driving trip to a strange city, the experience of finding a self-service gas station was novel: after parking and turning off the engine, inserting an international credit card occasionally failed, so I switched to cash prepayment, selected 93-octane gasoline, followed the screen icons to operate, picked up the nozzle to refuel, listened to the ticking sound until it ended, then hung it back. Exploring the convenience store next door to buy snacks. The whole process was like an adventure, but the instructions were clear—just needed patience to notice the button layouts of different brand machines. Safety always comes first; don't use a phone in the fueling area to prevent accidents. It was a very interesting travel memory.

Was this review help?
8
Share
Expand All
More Q&A

What is the Rear Axle Ratio?

Rear axle ratio is an important parameter of the engine, commonly known as the rear axle ratio, with its academic name being the final drive ratio. Below are specific details about the rear axle ratio: 1. Key Factors: The rear axle ratio is related to gears. The power output from the engine and transmission acts on the drive shaft, which rotates to transfer power to the pinion gear of the final drive, driving the ring gear of the final drive to rotate, and subsequently turning the axle shafts. 2. Calculation Formula: Number of teeth on the ring gear ÷ Number of teeth on the pinion gear. In simple terms, when the drive shaft rotates N times to make the axle shaft rotate once, this N represents the rear axle ratio.
107
Share

What Are the Symptoms of a Bad Half Shaft?

The symptoms of a bad half shaft include abnormal shaking and unusual noises while driving. The half shaft, also known as the drive shaft, is the component that transmits torque from the transmission and differential to the drive wheels. It has universal joints at both ends, which connect to the differential gear and the wheel hub bearing inner ring via splines on the universal joints. Depending on the support type, half shafts can be either fully floating or semi-floating. A fully floating half shaft only transmits torque and does not bear any reaction forces or bending moments, making it easy to install and remove. A semi-floating half shaft, on the other hand, transmits torque while also bearing all reaction forces and bending moments. It has a simpler support structure and lower cost, but it is more difficult to remove and install.
101
Share

Differences Between Transverse and Longitudinal Engine Layouts

The differences between transverse and longitudinal engine layouts are as follows: 1. Different placement directions: A transverse engine is placed horizontally, requiring the transmission to be placed horizontally alongside it; a longitudinal engine is placed vertically, with the transmission located behind the engine. 2. Different power output directions: The power transmission direction of a transverse engine is typically perpendicular to the car's forward direction; the power transmission direction of a longitudinal engine is usually parallel to the car's forward direction. 3. Different drivetrain configurations: Transverse engines are used in front-wheel-drive vehicles; longitudinal engines are used in rear-wheel-drive vehicles. 4. Different suspension systems: Transverse engines use MacPherson strut suspensions; longitudinal engines use multi-link or double-wishbone suspensions.
111
Share

What are the causes of a weak starter operation?

The causes of a weak starter operation include the following points: 1. Insufficient battery charge or oxidized wire terminals: When turning the starter switch to the start position, if the engine rotates when decompressed but the starter does not rotate or struggles when not decompressed, it is likely due to insufficient battery charge or oxidized wire terminals. 2. Poor contact between the brushes and the commutator, or partial short-circuit in the motor winding: If the starter rotates very slowly when decompressed and sparks occur at the commutator, it is mostly due to worn brushes or commutator causing poor contact, or short-circuiting of the commutator copper segments. 3. Armature rubbing against the magnetic poles or damaged coil insulation: If the starter rotates very slowly when decompressed and produces noise or smoke, it is mainly caused by the armature rubbing against the magnetic poles or damaged coil insulation.
105
Share

What are the reasons for a car engine lacking power?

Car engine lacking power is caused by: 1. Clogged fuel lines or insufficient fuel supply, especially at higher RPMs when greater load and fuel volume are required. Restricted fuel flow leads to decreased engine power and poor performance; 2. Fuel injector leakage or nozzle blockage results in poor atomization, causing incomplete combustion after fuel injection and engine power loss. The car engine is the power-generating device for automobiles, serving as the heart of the vehicle that determines its power performance, fuel efficiency, stability, and environmental friendliness. Based on different power sources, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems.
105
Share

How to Cancel the Auto-Locking Function on the Cruze?

The auto-locking function on the Cruze can be canceled either through the settings on the car's dashboard or by using a car diagnostic tool. The auto-locking feature is a safety function that typically activates when the vehicle reaches a certain speed, primarily to prevent doors from suddenly opening while driving, thereby avoiding potential accidents. The Cruze has a body length, width, and height of 4666mm, 1807mm, and 1460mm respectively, with a wheelbase of 2700mm. It features a 4-door, 5-seat sedan body structure, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.