···
Log in / Register

How to open the trunk of the Changan CS55 in the car?

6Answers
LeLeonardo
07/24/2025, 10:37:17 PM

The methods to open the trunk of the Changan CS55 are as follows: 1. On the driver's door panel, or below the left side of the steering wheel, or by using the trunk button on the key, press and hold for 2-3 seconds to open. If the smart key is not nearby and remote opening is not possible, press and hold the trunk button on the key for 2 seconds to open. As for how to close the trunk lid, simply push it gently until it latches. 2. Many car owners have reported issues with the trunk lid not staying closed. Some have found that after closing the trunk lid, it pops back open and an alarm sounds. This is likely because the car key was left inside the trunk, which is a protective measure to prevent the key from being locked inside the car.

Was this review help?
112
Share
CharlieAnn
08/11/2025, 07:46:48 AM

As a long-term owner of the Changan CS55, my most frequently used method for opening the trunk in daily driving is operating it directly from the cabin. The button is discreetly located at the bottom of the left front door interior, marked with a small tailgate icon. A gentle press triggers automatic opening, which is incredibly convenient. When the vehicle is powered on, this electronic switch responds swiftly; however, if unresponsive, first verify if the power switch is engaged or check for a blown fuse needing replacement. I routinely use this method for loading/unloading items, eliminating the hassle of exiting the vehicle. In humid/rainy conditions, the button might stick—simply clean off dust deposits. Safety tip: Operate only when parked to prevent item spillage. While the remote key also functions, the in-cabin button proves more practical, significantly enhancing daily-use efficiency.

Was this review help?
5
Share
Expand All
VanReid
09/26/2025, 10:49:13 PM

From a technical perspective, the in-car mechanism for opening the CS55's trunk is quite sophisticated. The button is located at the lower end of the driver's side door panel, connected to the electronic control system. Pressing it sends a signal to the controller, which activates the tailgate motor to open or close. The operation is straightforward: simply press the button while seated in the driver's seat to open it. If it malfunctions, check the fuse box or wiring connections to avoid voltage fluctuations affecting performance. In daily use, it's very convenient for loading and unloading goods. Combined with key control for double security, the in-car method is the most direct and efficient. Regular maintenance, such as keeping the button clean to prevent oxidation, ensures stable functionality.

Was this review help?
19
Share
Expand All
WestonDella
11/09/2025, 11:48:49 PM

For beginners like me who are new to cars and have just started driving the Changan CS55, opening the trunk is actually very simple: there's a button on the driver's side door panel—just press it gently to open. Make sure the car is in the ignition-on state, otherwise the button won't work. The steps are straightforward: locate the button and press it—quick and safe. I've grown to love this design after getting used to it. If it doesn't open, check the battery or clear any obstructions, and the problem should be solved.

Was this review help?
3
Share
Expand All
CodyRose
12/31/2025, 01:33:44 AM

As someone who prioritizes safe driving, I remind you that opening the CS55's trunk should be done using the interior button, but only after the vehicle is fully stopped. The button is conveniently located on the left door panel—just press it to open. Always ensure the car is stationary before proceeding to prevent accidents. Regularly check the button and fuse conditions to maintain responsiveness, and seek professional repair immediately if any issues arise. When I use it, I avoid operating in busy areas and always choose a safe location first.

Was this review help?
8
Share
Expand All
SophiaDella
03/28/2026, 03:17:40 AM

As a practical car owner, I find the CS55's trunk button conveniently located on the inner side of the left door for easy pressing and automatic opening, facilitating cargo handling. If the button gets stuck, clean the contact surface or check the fuse box; combined with remote control for flexible operation, it enhances outdoor activity convenience. I recommend regular maintenance to ensure smooth functionality and prolong the user experience.

Was this review help?
7
Share
Expand All
More Q&A

Can the rear seats of the BYD Han be folded down?

The rear seats of the BYD Han cannot be folded down. Here is a brief introduction about the BYD Han: 1. Basic information: Following the launch of the 'Qin' electric vehicle, BYD will introduce the new 'Tang' dual-mode electric vehicle. In 2016, another dual-mode electric vehicle with the code name E9 was launched, named 'Han', with a 0-100 km/h acceleration time of 3.9 seconds. 2. Name origin: The legendary sports car, originally known as the BYD E9, has been confirmed by BYD to be named 'Han'. Its performance remains the same as before, with a 0-100 km/h acceleration time of 3.9 seconds. However, in terms of the model, to compete directly with Tesla, the 'Han' will be a four-door coupe.
118
Share

What is the Toyota Avalon?

Toyota Avalon, also known as the Asia Dragon, is a mid-to-large luxury sedan launched by Toyota in the US market. Introduction to Avalon: The Avalon is Toyota's flagship product, first introduced in 1994 and now in its fourth generation, which is the model about to be domestically produced and launched in China. Unlike the Toyota Crown, another flagship product that primarily targets the Japanese domestic and Asian markets and later entered the European market, the Avalon was initially sold exclusively in the North American market. Avalon Launch Time: The Toyota Avalon was introduced in 1994 as Toyota's flagship product, filling the gap left by the discontinuation of the Cressida series. The car is produced at Toyota's Georgetown plant in Kentucky, USA, and was initially sold only in the US market. The Avalon comes with high-standard equipment and can be fitted with seating for six people. The Avalon is positioned above the Toyota Camry.
101
Share

What is the purpose of using a tensioner pulley for the drive belt?

The purpose of using a tensioner pulley for the drive belt is to adjust the initial tension of the belt. The tensioner pulley mainly consists of a fixed housing, tensioner arm, wheel body, torsion spring, rolling bearing, and spring bushing, etc. It can automatically adjust the tension according to the different tightness levels of the belt, ensuring the transmission system is stable, safe, and reliable. The tensioner pulley uses a spring or hydraulic pressure to generate a force that tightens the belt, allowing the belt to press against the working pulley with appropriate pressure. Precautions for the tensioner pulley are: 1. The tension force of the tensioner pulley should not be too small, as insufficient tension will reduce the friction between the belt and the working pulley, eventually causing the belt to slip; 2. The tensioner pulley should generally be placed on the inner side of the slack side, so that the belt is subjected to only one-way bending, and it should also be as close as possible to the large pulley to avoid excessively affecting the wrap angle of the small pulley.
102
Share

What are the differences between the Ford Territory and the Ford Kuga?

The differences between the Ford Territory and the Ford Kuga: 1. Different power performance: The Ford Territory's engine has a maximum power of 103 kW and a maximum torque of 225 Nm; the Kuga's engine has a maximum power of 133 kW and a maximum torque of 240 Nm. 2. Different body dimensions: The Ford Territory's body dimensions are 4580mm, 1936mm, 1674mm; the Kuga's body dimensions are 4524mm, 1838mm, 1701mm. 3. Different brands: The Ford Territory is a model under Jiangling Ford; the Kuga is a model under Changan Ford. Both cars use a front MacPherson independent suspension and a rear multi-link independent suspension.
114
Share

What to Do When Encountering Rain During the Subject 3 Driving Test?

Precautions for the Subject 3 driving test in rainy weather include: 1. Check if the rearview mirrors have raindrops obstructing visibility before getting in the car; 2. Control speed appropriately, enhance observation, and increase following distance; 3. Shift to a lower gear in advance when encountering waterlogged sections; 4. Slow down early and yield to pedestrians and non-motorized vehicles when passing through areas with them. The road driving skills tested in Subject 3 include: preparation before starting, light simulation test, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving.
111
Share

What is the standard size of a parallel parking space in the driving test?

The standard size is 1.5 times the length of the test vehicle plus one meter, while the width is the basic width of the test vehicle plus 80 centimeters. The width of the driving lane is 1.5 times the vehicle width plus 80 centimeters. When entering the parking area for parallel parking, try to park as close to the right side of the road as possible, but do not cross the yellow right edge line to avoid reversing too far and crossing the line. Below is relevant information about the driving test: 1. Failure: During the test, if a candidate fails one subject, the following subjects will not proceed. Each subject has two attempts, and if both attempts fail, the test is terminated. During the validity period of the learner's permit, the candidate can pay for a retake and attempt the test again after further study. The retake fee varies depending on the region. 2. Retake: After completing the subject one test, candidates must pass subjects two and three within three years. If they fail to do so, the test results become invalid, and they must re-register for the subject one test. Under the new regulations, subjects two and three each have five attempts. If the candidate fails to pass within these five attempts, they must retake the subject one test.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.