How to Open the Hood of a Lexus UX?

How Often Should Manual Transmission Clutch Plates Be Replaced in Terms of Mileage?

Manual transmission clutch plates should be replaced every 100,000 kilometers. The power transmission device between the engine and the transmission in manual transmission vehicles is the clutch three-piece set, which includes the pressure plate, friction plate, and release bearing. Here are the situations when clutch plates need replacement: When depressing or releasing the clutch pedal, you hear metal friction sounds or even smell a burning odor, which are clear signs of severe clutch plate wear; you notice the clutch engagement point has become higher; you feel a decrease in power when the car is climbing a hill, with the engine speed increasing but the power response being delayed or insufficient; you experience uneven power engagement when releasing the clutch. Methods to extend the lifespan of clutch plates: When shifting gears, slow down the release of the clutch pedal, wait until the clutch is fully engaged, then gradually release the clutch pedal while pressing the accelerator pedal to ensure a smooth start. While driving, try to only depress the clutch pedal during gear shifts and low-speed braking. Avoid pressing the clutch pedal unnecessarily, and refrain from resting your foot on the clutch pedal for extended periods while driving, as this accelerates clutch plate wear and leads to damage.

119

Share

What Are the Hazards of Fire-Damaged Vehicles?

Hazards of fire-damaged vehicles: After exposure to high temperatures, the plastic insulation layers of various wiring harnesses will have aged, making them prone to short circuits. In minor cases, this may burn out fuses and electronic control components, while in severe cases, it can lead to spontaneous combustion. In metal heat treatment processes, there is a technique called "annealing." After annealing, the hardness of the metal decreases, making it easier for further processing. A vehicle that has been through a fire essentially undergoes an "annealing" process on its body frame, which reduces the frame's strength. Therefore, fire-damaged vehicles are similar to accident-damaged vehicles in this regard. After a vehicle has been through a fire, the visible damage to plastic components is not the main issue—these can simply be replaced. The real danger lies in the changes to the vehicle's structural strength. Once exposed to fire, the metal's microstructure alters, causing the energy-absorbing zones in collision areas to lose their functionality. In the event of an accident, safety can no longer be guaranteed.

115

Share

What is the tire model and specification of the Reiz?

The tire specifications for the Reiz are 235/45R18 and 215/60R16, corresponding to the high-end model and the low-end/sub-low-end models respectively. The Reiz's body dimensions are 4750mm in length, 1795mm in width, and 1450mm in height, with a wheelbase of 2850mm. In terms of suspension, the front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension. The vehicle offers two powertrain options: 1. Equipped with a 2.5-liter V6 naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum power of 142KW, maximum horsepower of 193PS, and maximum torque of 236Nm; 2. Equipped with a 3.0-liter V6 naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum power of 167KW, maximum horsepower of 227PS, and maximum torque of 293Nm.

113

Share

What to Do When a Diesel Car Emits Black Smoke?

Solutions for diesel cars emitting black smoke: 1. Remove the air filter and observe the exhaust smoke color. If the black smoke condition improves, the fault is caused by severe dirtiness of the air filter; 2. During engine operation, conduct a cylinder-by-cylinder fuel cut-off test. When a certain cylinder is cut off, if the engine speed decreases, black smoke significantly reduces, and knocking sounds weaken or disappear, it indicates excessive fuel supply to that cylinder. If the engine speed changes little and black smoke disappears, it suggests poor spray quality of the injector in that cylinder; 3. Check if the fuel supply timing is too early. If it is, adjust it accordingly. After identifying the faulty cylinder, disassemble and inspect the injector. If necessary, replace it with a new injector for comparison. If the fault disappears with the new injector, it indicates a problem with the original injector.

112

Share

What brand of tires does the GAC Honda Lingpai use?

Honda Lingpai is equipped with Maxxis brand VICTRA-510 series tires, with the specification of 215/55R16. These are paired with 16-inch two-tone alloy wheels, capable of a maximum load capacity of 610KG and a top speed of 210km/h. Here are some relevant details: 1. The tires used for this model are from the Maxxis brand. Their tread patterns mainly fall into four series: Sport Series, Comfort Series, Economy Series, and SUV Series. Different tread patterns can affect the vehicle's performance, fuel consumption, tire noise, and road condition adaptability. 2. Products from the Maxxis brand have certain characteristics—they are relatively wear-resistant, economical, and offer a high comprehensive cost-performance ratio. 3. For over fifty years, the company has consistently provided high-quality tire products for sedans, light trucks, bicycles, motorcycles, ATVs, trailers, and other vehicle types. Their products are sold in more than 170 countries, with business operations spanning Asia, Europe, and North America, making it one of the world's leading tire brands.

117

Share

Can I directly add coolant if it's insufficient?

Coolant can be directly added if it's insufficient, but it must be the same type. Different brands of coolant have varying production formulas, and mixing them may cause chemical reactions between additives, rendering them ineffective. How to choose coolant: The basic indicators of coolant are freezing point and boiling point. Coolants on the market come in freezing points such as -15℃, -25℃, -30℃, and -40℃. Generally, it's advisable to choose one that is at least 10℃ lower than the lowest temperature in your area. How to determine if coolant is insufficient: Observe the coolant warning light on the dashboard. If it lights up, it's likely due to insufficient coolant, though it could also be caused by excessively high engine temperature. Check the coolant reservoir. If the level is below the minimum mark (MIN), do not continue driving; add coolant promptly. Check the water level scale on the coolant overflow tank. The normal coolant level should be between the maximum and minimum marks. If it's below the minimum mark, it indicates insufficient coolant.

108

Share