How to Modify the Registered Mobile Phone Number for a Vehicle?

Is There No Impact If a New Car Is Left Unused for Several Days?

Leaving a new car unused for 7-14 days has no impact, but it is advisable to start the vehicle for 5-10 minutes every week or two to recharge the battery. Prolonged inactivity of a new car can lead to battery depletion and aging of rubber components. Battery Depletion: During extended periods of inactivity, continuous discharge from the battery can easily lead to depletion. In mild cases, it may affect the next vehicle start-up, while in severe cases, it can directly cause battery damage. Each instance of excessive discharge causes irreversible harm to the battery. Aging of Rubber Components: Rubber components in cars, such as tires and door/window seals, are highly susceptible to premature aging due to exposure to sunlight and humidity changes, leading to reduced performance and shorter lifespan. The aging of rubber components primarily occurs because rubber is an unsaturated hydrocarbon polymer, which readily absorbs oxygen from the air and oxidizes. Additionally, vulcanized rubber has a certain degree of permeability, allowing oxygen to penetrate and cause internal oxidation.

109

Share

What is the method for setting up automatic folding of car rearview mirrors?

The method for setting up automatic folding of car rearview mirrors is done through the menu button on the multifunctional steering wheel. It can be configured using shortcut key combinations inside the car. Simultaneously pressing the selection keys L+R for rearview mirror adjustment will complete the setup. The rearview mirror folding setting button is located at the lower left of the knob, marked with a rearview mirror folding symbol. Correct adjustment angles for rearview mirrors: For the central rearview mirror, the correct adjustment method is to align the mirror parallel to the horizon, with the horizon positioned at the center 1/2 of the mirror surface. To ensure clear visibility of the road behind, the mirror can be angled toward the driver. For the left rearview mirror, adjust the horizon to the center 1/2 of the left rearview mirror, while keeping 1/4 of the car body visible in the mirror. Method for setting up automatic folding of side mirrors: Move the selection switch to choose the left or right outside rearview mirror. Press the adjustment knob to adjust the direction (up, down, left, or right) of the currently selected rearview mirror. To adjust the other rearview mirror, repeat steps 1 and 2. Press the folding switch to automatically fold the rearview mirror; pressing it again will unfold the mirror. If the configuration is for manual adjustment of the rearview mirrors, you will need to adjust them yourself. You can lower the car window or open the door and manually press the edge of the rearview mirror to adjust it.

109

Share

What is the reason when the thumb shifter cannot be shifted?

The reason why the thumb shifter cannot be shifted is that the shift cable and housing are severely rusted. Below is an introduction about automotive parts: 1. Introduction: Automotive parts are the individual units that make up the entire vehicle and products that serve the vehicle. 2. Identifying genuine parts: (1) Check the packaging and printing: Genuine parts usually have standardized packaging with uniform specifications and clear, regular printing. (2) Check the color and paint: Some original parts have specific colors on their surfaces. If you encounter other colors, they are likely counterfeit or inferior parts. (3) Check the appearance and feel: Genuine parts have clear and regular printing, casting, or markings, while counterfeit products have rough appearances.

118

Share

Which part of the vehicle does this position of the rotary switch control?

This position of the rotary switch controls the fog lights. Here is an introduction to the purpose of fog lights: Fog lights are installed at the front and rear of the vehicle. They are used for road illumination and safety warning when driving in rainy or foggy weather. Classification of fog lights: Fog lights are divided into front fog lights and rear fog lights. Front fog lights are generally yellow, while rear fog lights are red. The symbols for rear fog lights are slightly different from front fog lights - the light lines of the front fog light symbol point downward, while the rear fog light symbol lines are parallel. These symbols are usually located on the instrument control panel inside the vehicle. In foggy weather, front and rear fog lights are typically used together.

109

Share

What is the recommended tire pressure for scooters?

It is recommended to maintain a front tire pressure of around 170 kPa and a rear tire pressure of approximately 220 kPa. Below are some scooter maintenance tips: 1. Engine: Long-distance riding poses a significant challenge to the engine, as its temperature rises relatively quickly during operation. High temperatures can easily lead to performance degradation and abnormal wear. To address this, it's advisable to use high-quality lubricating oil, possibly even synthetic lubricants. 2. Related Systems: The filtration efficiency and air intake volume of the intake system can affect the engine's combustion state; the braking system directly impacts driving safety; the running gear system directly influences riding comfort. Therefore, regular inspections and maintenance should be performed on the intake system, braking system, and running gear system.

119

Share

Why won't the daytime running lights turn on?

The reasons why daytime running lights won't turn on include insufficient heat dissipation, poor circuit contact, bulb damage, and light guide ring driver failure. Insufficient heat dissipation: This can cause the LED chips to burn out, in which case the chips need to be replaced. Poor circuit contact: Poor contact during installation can lead to short circuits. Eliminate circuit faults, and if the driver power supply of the daytime running lights fails, the power supply needs to be replaced. Bulb damage: If the daytime running lights won't turn on and there are no issues with the circuit, it is usually due to bulb damage or ballast failure. Light guide ring driver failure: For example, loose or poorly connected driver plugs. For professional issues like repairing daytime running lights, it is recommended to go to a professional repair shop or 4S store for inspection and repair.

112

Share