···
Log in / Register

How to inspect the car when taking delivery?

5 Answers
JuliannaRose
07/29/25 6:06am

When taking delivery of the car, the inspection methods are: 1. Check the body surface for scratches or dents; 2. Look for signs of repainting in the engine compartment and the edges under the car; 3. Check if the gaps on both sides of the doors and the front hood are symmetrical and if there are any excessively large or small gaps; 4. When opening the doors, check the coordination between the key and the lock, test if the doors open smoothly, the opening should not be too strenuous, and listen carefully for any noise from the door hinges; 5. Check if the windshield is intact and free of cracks, and also pay attention to whether the glass is original when inspecting the exterior, as there are markings at the bottom of the glass; 6. Inspect vehicle accessories such as the battery, wipers, engine oil, and other consumables to see if they are aged, and check the working condition of the chassis, wheels, shock absorbers, and suspension.

Was this review help?
8
2
Share
LeLaura
08/12/25 9:03pm

When I go to pick up the car, the inspection process is absolutely crucial. I'll start with the exterior, carefully checking the body for any scratches or dents under good lighting, paying attention to whether the door gaps are even. Then, I'll inspect the tires to see if they're new and properly inflated. Inside the car, I'll test all the lights one by one, ensuring the headlights and turn signals work; after starting the engine, I'll listen for any unusual noises to ensure it runs smoothly; check the seat upholstery for wrinkles or stains; and adjust the air conditioning to confirm proper airflow. Don't forget to verify the purchase contract, invoice, warranty card, and the number of keys—raise any concerns on the spot. Bring your phone to take photos throughout the process as evidence in case of disputes later. For safety, take a quick test drive to feel the brake response and handling. Picking up a new car is a joyful occasion, but a thorough inspection ensures peace of mind when driving it home.

Was this review help?
7
5
Share
Expand All
DiJason
10/04/25 2:04am

I was really excited when picking up the new car, and inspection is a basic procedure. Walk around the car body to check for any paint flaws, which are especially noticeable under sunlight. Open the doors to inspect the interior—see if the seats are clean and if there are any scratches on the dashboard. Start the engine and listen for smooth operation; test both the heating and cooling functions of the AC, checking all vents. Don’t forget the electronic devices, such as lights, radio, and power windows. Verify all documents to ensure the invoice, manual, and insurance papers are complete. If you lack experience, it’s wise to bring along a car-savvy friend for a second look. Finally, take a short test drive of a few meters to feel the steering wheel’s responsiveness. After completing these checks, you can generally sign off with confidence.

Was this review help?
15
3
Share
Expand All
StElliana
11/17/25 3:40am

For vehicle pickup inspection, I focus on key points. Quickly scan the exterior for paint and tires; listen to the engine sound after starting; test brakes and lights; verify document matches. Safety first, take a short drive to check handling. Briefly inspect interior like seats and dashboard for damages. Be meticulous throughout, address any issues immediately.

Was this review help?
19
5
Share
Expand All
StKhloe
01/07/26 5:17am

I really enjoy thoroughly inspecting a new car when I get it. I walk around the car, admiring the evenness of the paint's gloss, even paying attention to the door gaps. For the interior, I check that the seat upholstery has no wear and that the dashboard buttons are responsive. After starting the engine, I listen for a deep, smooth sound. I test the air conditioning by adjusting the temperature and checking the airflow. I play music through the sound system to assess the audio quality. I also verify all the documents, including the invoice and keys. If time permits, I take photos to commemorate the occasion.

Was this review help?
16
1
Share
Expand All
More Forum Discussions

What is the reason for the high water temperature in the Piaggio X7?

The reason for the high water temperature in the Piaggio X7 may be due to a faulty thermostat causing insufficient opening and poor coolant circulation. Here is more information about the car radiator: 1. Introduction: The car radiator, also known as the heat exchanger, is a key component in the car's cooling system and part of the car engine. 2. Function: Its role is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release heat, and then returns to the water jacket to circulate, achieving temperature regulation. 3. Working Principle: When the engine's water temperature is high, the water pump circulates water repeatedly to lower the engine's temperature, thereby protecting the engine. In winter, if the water temperature is too low, the water circulation stops to prevent the engine from becoming too cold.
18
4
Share

Why is it okay to violate traffic rules at night?

Traffic violations at night can still be captured and will be recorded as traffic offenses. Below is extended information about traffic violations: Electronic monitoring: Electronic eyes use induction lines to detect pressure from vehicles on the road. The signals are collected by sensors and sent to the central processor, where they are temporarily stored in a register (this data is valid for one red light cycle). The license plate recognition rate is over 95% during the day and over 90% at night. Methods to avoid violations at night: When driving at night, avoid speeding, tailgating, driving while fatigued, misuse of headlights, reckless overtaking, and drunk driving. Before overtaking, check whether there are obstacles on the right side of the vehicle being overtaken to prevent collisions if the vehicle swerves left to avoid obstacles.
2
5
Share

How many points are deducted for driving in the wrong direction on highways compared to ordinary roads?

Driving in the wrong direction on ordinary roads results in a 3-point deduction; on highways, it's 6 points. Below is an introduction to the relevant content: Wrong-way driving: This refers to motor vehicles or non-motor vehicles traveling on the left side of the road, which is considered wrong-way driving. According to the law: Article 35 of the "Road Traffic Safety Law of the People's Republic of China" stipulates that motor vehicles and non-motor vehicles must drive on the right side. If caught for illegal parking via camera, a demerit point cycle is 12 months with a full score of 12 points, calculated from the date the motor vehicle driver's license is first issued. If the points do not reach 12, they will automatically reset to zero in the next cycle, and the counting will start anew.
1
5
Share

Can I switch from C1 to C2 after passing Subject 2?

You can switch from C1 to C2 after passing Subject 2. C2 test content: It also includes Subject 1 theory test, Subject 2 field test, and Subject 3 road test. Similar to the C1 license, the C2 license Subject 2 test includes single-plank bridge, slope start, parallel parking, reverse parking, and curve driving. "The only difference is that the test vehicle is an automatic transmission car." C2 test vehicle requirements: A light automatic transmission ordinary truck with a length of no less than 5 meters. Or a small automatic transmission ordinary passenger car with a length of no less than 4 meters, or an automatic transmission sedan with a length of no less than 4 meters. Annual physical examination: Not required for those under 60 years old.
16
1
Share

How Long Can a Convertible's Soft Top Keep Rain Out Without Leaking?

There is no specific time frame; it largely depends on the age of the car and the condition of the sealing strips. Below is relevant information about the rain resistance of soft-top convertibles: 1. Probability of Leakage: Soft-top convertibles have a high probability of leaking during rain. Since the roof of a soft-top convertible is a simple mechanical structure that allows for segmented opening and closing, the sealing between metal and metal connections primarily relies on installed sealing rings. Therefore, sealing rubber rings are installed between each segment of the convertible structure and the front windshield pillar (A-pillar) of the car body. 2. Age of the Car: New cars are less likely to leak because their rubber components are in better condition. However, over time and under external forces such as heavy rain and acid rain, the sealing rubber rings gradually age, harden, and may even crack, increasing the probability of roof leaks.
9
0
Share

What is the valve clearance standard for the gy6125 motorcycle?

Motorcycles have larger valve clearances compared to other vehicle types. The intake valve clearance is 0.05-0.08 mm, and the exhaust valve clearance is 0.09-0.13 mm. Valve clearance should not be too large or too small: The valve clearance should be maintained at normal values to ensure the engine operates properly. If the valve clearance is too small, it can cause difficulties in cold starts, unstable idling, and accelerate wear on the rocker arms and camshaft. If the valve clearance is too large, it can lead to increased engine noise, insufficient intake and exhaust efficiency, and affect engine power. Introduction to valve clearance: Valve clearance is set to ensure the normal operation of the internal combustion engine's valve train. Since the valve train operates at high speeds and temperatures, components like the valve tappet and valve stem expand when heated, which can automatically push the valve open, causing the valve and valve seat to not close tightly and resulting in air leakage.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.