How to Identify the Transmission Model?

What are the Ford off-road vehicle models?

Ford off-road vehicles include: Ford Bronco, first-generation Ford Explorer, Ford F-150 Raptor, Ford Everest, and Ford Toller T4. An off-road vehicle is a type of automobile specifically designed for off-road use, primarily referring to vehicles capable of operating on rough terrain. Taking the 2019 3.5T Ford F-150 Raptor Performance Edition as an example: Appearance: It is a pickup truck launched by Ford (Imported), with a length of 5910mm, width of 2192mm, height of 1992mm, and a wheelbase of 3708mm. Power: It is equipped with a 3.5T twin-turbocharged engine, with a maximum power of 380kw and a maximum torque of 280nm, paired with a 10-speed automatic transmission.

16

4

Share

How to open the rear wing of the new A7?

The method to open the rear wing of the new A7 is as follows: 1. The rear wing of the Audi A7 opens automatically. When the vehicle speed reaches the set speed, it will automatically open. When the speed reaches 130km/h, the hidden spoiler wing on the upper end of the luggage compartment cover will automatically rise to provide sufficient downforce. When the speed drops to 80km/h, it will smoothly retract into the rear of the car. 2. Manual opening: There is a dedicated button to control the rear wing below the display screen. Press it to raise the rear wing. Additional information: The car rear wing refers to the ducktail-shaped protrusion installed at the rear end of the car's trunk lid, which is part of the car's aerodynamic kit. Its main function is to reduce the lift at the rear of the vehicle.

18

2

Share

How to fold down the rear seats of the Geely Emgrand GS?

Method to fold down the rear seats of the Geely Emgrand GS: The Emgrand GS rear seats are equipped with buckle-style fixing switches at the top, with pivot connections between the backrest and the seat cushion. The backrest can be easily folded down with a one-touch operation to increase the trunk space. Here is some relevant information about the Emgrand: 1. The new Emgrand offers 10 models with two engine options, 1.4T and 1.8L, for consumers to choose from. It adopts a new design concept, adds a high-gloss red paint option, and is equipped with the GKUI Geely Smart Ecosystem. 2. Advanced configurations such as full-speed ACC adaptive cruise system are available on the 1.4T models, further solidifying the market position of the Emgrand GS after its launch.

18

5

Share

Where is the Cabin Air Filter of Haval H2S Located?

The cabin air filter of Haval H2S is located inside the glove compartment in front of the passenger seat. Below is the replacement method for the cabin air filter: 1. Clear out all items from the passenger glove compartment. 2. After cleaning the glove compartment, use a screwdriver to remove the screws on both sides of the glove compartment. 3. Once the screws are removed, press the plastic clips on both sides of the glove compartment to take it down. 4. After removing the glove compartment, you will see the cabin air filter housing. 5. Press the plastic clip on the cabin air filter housing and then remove the housing. 6. After taking down the housing, replace it with a new cabin air filter, and then reassemble the glove compartment in the reverse order of disassembly. The entire process of replacing the Haval H2S cabin air filter is now complete.

4

1

Share

Where is the cabin air filter located in Dongfeng Fengshen H30?

Dongfeng Fengshen H30's cabin air filter is located under the glove compartment on the passenger side. Remove the three self-tapping screws on the outermost inner side facing the seat, pry open the cover to reveal a long sliding cover. There is a self-tapping screw on the left side, remove it and slide it to the left to see the cabin air filter. Below is the replacement method for Dongfeng Fengshen H30's cabin air filter: 1. Open the glove compartment and remove all items; 2. Remove the screws fixing the glove compartment; 3. Remove the side panel and continue removing screws; 4. Take off the glove compartment; 5. Locate the cabin air filter compartment and remove its cover; 6. Replace with a new cabin air filter; 7. Reassemble the glove compartment following the disassembly steps to complete the replacement.

20

0

Share

Can a driver's license be inspected in a different location?

According to the latest regulations on motor vehicle driver's license inspection, a driver's license can be inspected annually in a different location. Below is relevant information about the annual inspection of a driver's license in a different location: Required Materials: According to Article 57 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," if there are changes in the motor vehicle driver's information, the "Motor Vehicle Driver's License" must be replaced. When applying, the "Motor Vehicle Driver's License Application Form" must be filled out. Processing Location: Processing Location: The vehicle management office where the "Motor Vehicle Driver's License" was issued or any other vehicle management office outside the place of issuance. Processing Hours: Monday to Friday, 9:00 AM to 5:00 PM (excluding national statutory holidays and adjusted working days).

6

0

Share

How to Identify the Transmission Model?

What are the Ford off-road vehicle models?

How to open the rear wing of the new A7?

How to fold down the rear seats of the Geely Emgrand GS?

Where is the Cabin Air Filter of Haval H2S Located?

Where is the cabin air filter located in Dongfeng Fengshen H30?

Can a driver's license be inspected in a different location?

Should the Jade use 0W-20 or 5W-30?

What to Do When the Reversing Camera Image is Too Dark?

How to Deal with Failed OBD Test in Vehicle Inspection?

Can a car start without the key?