How to Identify the Production Date of Car Glass?

1 Answers
VanAsher
07/29/25 3:14pm
Methods to identify the production date of car glass: Look for a code in the lower left or lower right corner of the glass. In the last or second-to-last row, there is a number and several small black dots. The number of small black dots indicates the production month of the glass. If the small black dots are in front of the number, subtract the number of dots from 7; if the small black dots are behind the number, subtract the number of dots from 13. The result is the production month of the glass. There are mainly three types of automotive glass: laminated glass, tempered glass, and zone-tempered glass. Laminated glass is a glass product made by bonding two or more layers of glass with one or more layers of transparent adhesive material.
Was this review help?
2
4
Share
More Forum Discussions

How to Reset the Maintenance Light on an Older Volkswagen Touran?

First, turn off the ignition switch to shut down the vehicle. Then, use your left index finger to press and hold the "0.0" button located below the dashboard. After releasing, you need to press the "0.0" button below the dashboard again within 30 seconds. Prepare the VAS6150 to connect to the OBD port, select the diagnostic module, choose the maintenance reset option, and click confirm. The maintenance light reset is now complete.
1
1
Share

How to Open the Sunroof on an Older Model Odyssey?

To open: Pull the switch firmly backward. To close: Push the button firmly forward. To open: Gently pull the switch backward until the sunroof reaches the desired position. To close: Gently push the switch forward until the sunroof reaches the desired position. To lift: Press the middle part of the panoramic sunroof glass switch. To close: Push the switch firmly forward.
7
2
Share

What is the correct way to use Geely's one-button start?

Press the start button once, at this time the ACC light will turn on; press it once more, and the vehicle will perform a self-check. Depress the brake to ignite and start the engine. You can choose to warm up the car in place, with the duration depending on the environment; then depress the brake pedal again, shift to D gear, and release the handbrake. Slowly release the brake pedal, gently press the accelerator, and the start-up is complete. It is not necessary to follow these steps every time to start the vehicle.
20
2
Share

How to Deal with Foggy Windows on a Levin?

Using hot air to blow directly is more effective than using cold air, although this method takes relatively longer to work. Opening the windows slightly can help circulate air, allowing the cold air from outside to enter the car, reducing the temperature difference between the inside and outside of the car, thereby eliminating the fog. Using professional anti-fog spray, evenly spray it on the cleaned glass surface, and wait for it to form a protective film on the inner side of the glass.
6
3
Share

What is the method for removing and installing the air conditioning panel on an old Peugeot 308?

First, remove the air conditioning control module, then use a plastic pry tool to loosen the upper cover panel on the center console. Remove the upper cover panel of the center console, then use the plastic pry tool to loosen the air vents on the center console. Once the air vents are removed, the disassembly is complete.
19
3
Share

How to Remove the Dust Cover Under the Gear Lever of Lavida?

Metal card, cross screwdriver, soldering iron, knife, scissors. First, insert the metal card into the gap of the plastic base of the gear lever, then remove the manual gear dust cover and plastic base. Use the soldering iron to weld the dust cover onto the plastic base. Then press the manual gear knob back in and flip the plastic base back to its original position.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.