···
Log in / Register

How to Identify the Model Number of an Oil Filter?

1Answers
MacFinley
08/26/2025, 12:44:35 AM

The model number of an oil filter can usually be found on the filter housing, which typically includes the manufacturer's part number. Alternatively, you can refer to the vehicle's maintenance manual. An oil filter, also known as an oil element, comes in two main types: full-flow and bypass. The full-flow filter is connected in series between the oil pump and the main oil passage, filtering all the lubricating oil entering the main passage. The bypass filter, on the other hand, is connected in parallel with the main oil passage and only filters a portion of the oil pumped by the oil pump. Structurally, oil filters can be categorized into replaceable, spin-on, and centrifugal types. The filtering materials used include filter paper, felt, metal mesh, and non-woven fabric. A high-quality oil filter should possess strong filtering capability, low flow resistance, and a long service life.

Was this review help?
120
Share
More Q&A

What is the in-cylinder temperature of a car engine?

The in-cylinder temperature of a car engine is approximately 90°C. Here is some relevant information about car engines: 1. Classification: Based on the working method of the intake system, they can be divided into four types: naturally aspirated, turbocharged, mechanically supercharged, and dual-charged. 2. Principle: A four-stroke gasoline engine mixes air and gasoline in a certain proportion to form a good combustible mixture, which is drawn into the cylinder during the intake stroke. The mixture is compressed, ignited, and burned to generate thermal energy. The high-temperature and high-pressure gas acts on the top of the piston, pushing the piston to perform reciprocating linear motion, and outputs mechanical energy externally through the connecting rod, crankshaft, and flywheel mechanism. A four-stroke gasoline engine completes a working cycle during the intake stroke, compression stroke, power stroke, and exhaust stroke.
104
Share

How to Determine the Position of Your Wheels

Determining the position of your wheels can be done using the wipers, rearview mirrors, etc. Below are specific methods to determine the position of your wheels: 1. Wipers: By observing the nodes on the left and right sides of the wipers, you can determine the position of the wheels, as the position of the wiper nodes corresponds to where the wheels will pass while driving. 2. Rearview Mirrors: By observing the door handles on both sides through the rearview mirrors, the position where the door handles align with the solid lines on the ground indicates where the wheels have passed. Therefore, if you notice the door handles overlapping with the solid lines on the ground, it means the wheels have already crossed the solid lines. 3. Center of the Windshield: By observing the solid lines on the road, if the solid lines align with the center of the windshield, it indicates the position where the wheels are traveling.
114
Share

What type of front and rear suspension does the Atenza use?

Atenza uses MacPherson independent suspension for the front and multi-link independent suspension for the rear. Below is additional information about the Atenza: 1. Model Introduction: The Atenza is the flagship and strategic model under FAW Mazda, having won prestigious awards including the 2013 German Red Dot Design Award, World Car of the Year, and Ward's 10 Best Interiors. 2. Vehicle Configuration: It features the KODO design language for its exterior, with standard LED headlights resembling a scorpion's eyes. The interior adopts Mazda's 6.5-generation design, comprehensively upgraded in layout, materials, and technology, including in-car Wi-Fi and an ADD head-up display system, significantly enhancing the overall sense of technology.
114
Share

Can I Change Driving Schools Midway?

It is possible to transfer to another driving school during the driving test process, but the following conditions must be met: 1. Affiliation: Both driving schools must be affiliated with the same Vehicle Management Office. 2. Consent from the Original Driving School: The original driving school must agree to the transfer. 3. Unified Driving School: The receiving driving school must be a unified driving school. Below is extended information regarding the content of the Subject 4 test: 1. Operational Requirements: Safe and civilized driving operational requirements. 2. Safe Driving: Knowledge of safe driving under adverse weather and complex road conditions. 3. Emergency Handling: Methods for handling emergencies such as tire blowouts. 4. Post-Accident Knowledge: Knowledge of what to do after a traffic accident occurs, etc.
108
Share

What are the pros and cons of a straight-through downpipe?

The advantage of a straight-through downpipe is smoother exhaust flow and strong high-RPM horsepower. The disadvantages include loss of low-end torque in D gear, unpleasant odors, and being environmentally unfriendly. Below are specific details about straight-through downpipes: 1. Definition: The downpipe is the section directly connected to the engine's exhaust. Modifications in this area typically involve upgrading the entire exhaust system to increase diameter. Converting to a straight-through downpipe, paired with high-flow intake, allows for smoother exhaust emission and acceleration, resulting in stronger power output. 2. Negative effects: Straight exhaust emissions fail to meet standards. Modified straight exhaust pipes generally exhibit weak performance at low RPMs, increased noise levels, and excessively loud volume. Untreated exhaust emissions exceed limits, causing severe pollution. The odor can drift into the car cabin, and fuel consumption may increase.
104
Share

What is the braking distance of the Exeed LX?

The braking distance of the Exeed LX is approximately 40.83 meters. Below is the relevant introduction to Exeed vehicles: 1. Exterior: The front grille features a large honeycomb design with horizontal chrome trim accents, and the headlights on both sides are connected by a chrome strip, giving it high recognition. The bumper has large air intakes on both sides, with fog lights and chrome trim accents above, making it very refined. 2. Configuration: Standard features include front seat heating, color-adjustable ambient lighting, keyless entry/start, AVM panoramic imaging system, BSW blind spot monitoring system, and FRS facial recognition system, all of which enhance the vehicle's comfort and safety from various aspects. 3. Powertrain: The Exeed TXL/TX is equipped with a 1.6TGDI engine, delivering a maximum power of 145KW and a maximum torque of 290Nm, meeting the China VI emission standards. It is paired with a Getrag 7-speed wet dual-clutch transmission, with fuel consumption around 7L/100km.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.