···
Log in / Register

How to Fold Down the Rear Seats of Vios?

1Answers
VonIsaac
07/25/2025, 05:04:30 AM

To fold down the rear seats of the Vios, follow these steps: 1. Lift the seat, noting that there is a clip on each side at the front of the rear seat. First, lift one side forcefully until the clip separates from the seat, then repeat the same method for the other side. 2. After lifting the seat, observe that there is a hook inside the seat cushion corresponding to the direction of each clip. Use your hand to release the hooks and remove the seat cushion. Once the seat cushion is removed, you will find three screws at the bottom of the backrest; remove these screws. 3. After removing the screws, you can fold down the rear seats. Relevant information about the Vios is as follows: The latest Vios is equipped with a 1.5L L4 naturally aspirated engine, delivering a maximum horsepower of 110 PS, maximum power of 81 kW at 6000 rpm, maximum torque of 138 N·m at 4000 rpm, and is paired with a CVT (simulated 8-speed) transmission. The drivetrain is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.

Was this review help?
118
Share
More Q&A

Where is the cigarette lighter fuse of the Jetour X70?

The cigarette lighter fuse of the Jetour X70 is located in the small drawer below the left side of the driver's seat. The cigarette lighter is a component of the car, designed to provide a convenient ignition source for smokers. It serves as a device for lighting cigarettes and can also be equipped with a car inverter to convert the car's 12V, 24V, or 48V DC power into a current suitable for ordinary electrical appliances. The Jetour X70 is a mid-size 5-door, 5-seat SUV with dimensions of 4720mm in length, 1900mm in width, and 1710mm in height, and a wheelbase of 2745mm. It features front-wheel drive, with a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
114
Share

How to reset the maintenance light on BYD Yuan?

To reset the maintenance light on the BYD Yuan, follow these steps: 1. First, press the wrench button with your left hand, then turn on the ignition with your right hand. 2. Release the wrench button with your left hand and press the minute adjustment button on the time setting. 3. Turn off the ignition, remove your left hand from the time button, and then turn the ignition back on or start the engine—the maintenance reminder will disappear. The BYD Yuan is positioned as a compact SUV, with dimensions of 4320mm in length, 1765mm in width, and 1650mm in height, and a wheelbase of 2520mm. In terms of suspension, the BYD Yuan uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear.
117
Share

Is a Car with Replaced Glass Considered an Accident Vehicle?

Replacing the glass does not necessarily mean the car is an accident vehicle. There are various reasons for glass replacement, and it's important to determine whether the replacement was due to an accident or an unexpected event. If the glass was damaged and replaced due to a collision, then the car is considered an accident vehicle. However, if the glass was damaged by an unforeseen and unavoidable incident, such as a flying stone, it is not classified as an accident vehicle. The definition of an accident vehicle includes: 1. Vehicles that have suffered severe impacts damaging the engine compartment or the passenger compartment; 2. Vehicles with collision damage to the radiator support; 3. Vehicles where the rear quarter panel has suffered impact damage exceeding half of its area. Generally, an accident vehicle refers to one with structural damage, and vehicles affected by flooding or fire are also categorized as special types of accident vehicles.
114
Share

Can You Start the Car with One Push Without Pressing the Brake?

You cannot start the car with one push without pressing the brake. Pressing the one-push start button without stepping on the brake only powers on the electrical system, while pressing it with the brake engaged will start the engine. You can first press the button without stepping on the brake to power up the car's circuits and perform a self-check. If no issues are detected, you can then press the button while stepping on the brake to start the engine. The one-push start system is part of a smart car's features, designed to simplify the starting process with a single button that can also turn off the engine. The functions of the one-push start system include: 1. Multiple start modes; 2. Convenience and speed; 3. Stable and reliable performance; 4. Smart keyless entry; 5. Dual-mode free switching for smart keys; 6. Smart card backup key; 7. Intelligent silent car wash mode.
116
Share

What is the problem when the high-pressure pipe of a car air conditioner has high pressure?

High pressure in the high-pressure pipe of a car air conditioner is caused by liquid slugging damage to the compressor. Below are detailed explanations of high pressure in the high-pressure pipe of a car air conditioner: 1. To test the compression efficiency of the compressor when the high-pressure pipe has high pressure, a three-way pressure gauge set should be connected for testing without disassembling the system. 2. The high-pressure range is 1.3-1.7MPa; the low-pressure range is between 0.1-0.25MPa. Insert the temperature probe of an electronic thermometer into the air outlet to obtain a temperature reading. 3. When there are oil traces on the clutch coil and the suction plate of the compressor, its shaft seal is definitely leaking. For dirt blockages, use nitrogen or dried compressed air to repeatedly blow through until it is clean and unobstructed. When there is a yellow-brown sticky liquid in the sight glass, it indicates that the system is dirty or there is excessive oil storage. 4. When there is a certain amount of refrigerant in the system, accelerating the engine should cause the low-pressure gauge needle to drop significantly, and the high pressure should also rise significantly. The greater the throttle, the more the needle drops, indicating good compressor performance; if the low-pressure gauge needle drops slowly and slightly during acceleration, it indicates low compression efficiency of the compressor; if the low-pressure gauge needle shows almost no response during acceleration, it means the compressor has no compression efficiency at all.
111
Share

How many liters of engine oil does the Mercedes-Benz E300 require?

The Mercedes-Benz E300 requires 7 liters of engine oil. The functions of engine oil are: 1. To separate the surfaces of relatively sliding parts, thereby reducing wear; 2. To carry heat back to the oil tank and then dissipate it into the air, assisting the radiator in cooling the engine; 3. To circulate carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, flushing away contaminants generated on the working surfaces of parts through the flow of lubricating oil. The dimensions of the Mercedes-Benz E300 are 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm. The Mercedes-Benz E300 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 190kW and a maximum torque of 370Nm, paired with a 9-speed automatic transmission.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.