How to disable the recording function of a car's dash cam?

1 Answers
EmilianoMarie
07/30/25 10:05am
Click the microphone icon on the dash cam to turn off the recording function. Here is additional information: 1. Dash cam: A dash cam is a device that records images, sounds, and other relevant information during vehicle operation. After installation, it can record the entire driving process in video and audio, providing evidence for traffic accidents. For those who enjoy road trips, it can also document the journey through challenging terrains. While driving, it continuously records videos, along with time, speed, and location data, functioning much like a 'black box.' It can also be used at home as a DV camera to capture life's moments or serve as a home surveillance device. 2. Uses: It can also function as a parking monitor. It's important not to edit the video footage, as altered recordings may not be useful in the event of an accident. Additionally, it helps prevent unavoidable fraudulent claims that are common in today's society.
Was this review help?
7
1
Share
More Forum Discussions

How to Apply for Lifetime Exemption from Driver's License Inspection?

Renew the license on time and ensure that no more than 12 points are deducted annually within 10 years after the second renewal. Below is additional information about driver's licenses: 1. Introduction: A driver's license (full name: Motor Vehicle Driver's License), also known as a 'driving license,' is a document issued by government transportation authorities to individuals qualified to drive, typically in the form of a card. To obtain a driver's license, one must meet the minimum age requirement and pass a driving test. The license usually specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, passenger cars, trucks, buses, etc. 2. Driving Test Content: The examination includes three subjects: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). The subjects are conducted in the following order: traffic regulations and related knowledge (referred to as Subject 1 [theory]), field driving (referred to as Subject 2 [nine items]), and road driving (referred to as Subject 3 [road test and safe and civilized driving]). If a candidate fails a subject, the subsequent subjects will not proceed. Each subject has two attempts, and if both attempts are unsuccessful, the examination is terminated. During the validity period of the learning license, candidates can pay a re-examination fee and retake the test after further study. The re-examination fee varies depending on local regulations.
3
2
Share

What brand is the ZF transmission?

ZF, also known as ZF Friedrichshafen, is a transmission supplier from Germany. More information about ZF transmissions is as follows: 1. The full company name is ZF Friedrichshafen AG, headquartered in Friedrichshafen, Germany. It is a Fortune Global 500 company and, along with Aisin and Getrag, is known as one of the world's top three transmission suppliers. 2. It primarily develops and produces complete transmission and chassis systems for passenger cars, commercial vehicles, and construction machinery, as well as special transmissions for ships, helicopters, forklifts, and railway locomotives. Its main customers include Shanghai Volkswagen, Shanghai General Motors, FAW Group, and others.
17
5
Share

How to Remove Asphalt Stains from a Car?

Methods to remove asphalt stains from a vehicle are as follows: 1. For recently adhered asphalt, you can use clean water to scrub it off. When scrubbing, keep the water temperature at room temperature or below, and use a bristle brush to avoid scratching the paint surface. 2. If scrubbing alone is insufficient to completely remove the stain, you can opt for a tar and asphalt remover for cleaning. Shake the remover well, then use a clean towel to apply a small amount onto the surface of the stain. Wait for two minutes until the asphalt particles adhering to the car body soften, then wipe them off with a lint-free towel. Immediately rinse the area with clean water and dry it afterward. Using a specialized tar and asphalt remover can effectively eliminate the stain without damaging the paint surface.
13
4
Share

What is the N gear in a car?

The N gear in a car refers to the neutral gear. It operates on the same principle as the neutral gear in a manual transmission and can be used during brief stops. The functions of the N gear are as follows: 1. The N gear exists to disconnect the engine from the transmission. 2. During daily driving, when you need to make a temporary stop, such as waiting for pedestrians to cross the road, the N gear should be used. It not only reduces car vibrations but also lowers fuel consumption. 3. If the stop is not temporary, it is better to turn off the engine. First, shift to neutral, apply the handbrake, and then shift to P gear. This helps prevent excessive wear on the transmission. Especially when parking on a slope, it can also avoid jerky gear shifts when starting the car next time.
8
3
Share

How to Display Fuel Consumption on the Binrui Dashboard?

The method to adjust and display fuel consumption on the Binrui dashboard is through the buttons on the multifunction steering wheel, which allow you to toggle the car's fuel consumption display. Below is relevant information about the Geely Binrui car dashboard and fuel consumption: 1. Dashboard Fuel Consumption Display Content: It shows the car's average fuel consumption and instantaneous fuel consumption. Average fuel consumption refers to the fuel consumed per 100km of driving, while instantaneous fuel consumption is the fuel consumption generated each time the accelerator pedal is pressed during driving. 2. Binrui Fuel Consumption Description: The average fuel consumption of the Geely Binrui ranges from 4.9 to 5.9L per 100km. Compared to other vehicles in the same class, this car's fuel efficiency performance is quite outstanding.
5
1
Share

What to Do When the Power Window Fails to Operate?

There are many reasons for power window failure. Here is a detailed analysis and solutions: 1. Window lift motor damage or poor contact in the electrical control wiring harness: If you smell burning or hear unusual noises from the door panel when holding down the window button, it is likely that the window lift motor components are damaged. In this case, it is recommended to directly visit a 4S shop or auto repair shop to replace the window lift motor. 2. Motor overheating protection: To protect the power supply circuit, most window lift motors have an overheating protection mechanism. If components overheat for some reason, the motor will enter an overheating protection state, causing the window to fail to operate. In this situation, simply wait for the motor to cool down. 3. Excessive resistance in the glass guide channel: The door glass guide channel is an easily overlooked detail. During use, dust can accumulate in the glass guide channel, increasing resistance, which over time may make it difficult for the glass to rise. Regularly clean debris from the window glass guide rail or use grease for lubrication.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.