How to deal with unlicensed driving when the passenger has a license?

1 Answers
Milton
07/28/25 7:45pm
When a vehicle is in motion, the owner driving without a license will be punished according to the law, regardless of whether the passenger has a driver's license or not. Article 99 of the "Road Traffic Safety Law of the People's Republic of China" stipulates that driving a motor vehicle without obtaining a motor vehicle driver's license, or when the motor vehicle driver's license has been revoked or temporarily suspended, shall be fined and may also be detained for up to 15 days. Moreover, the passenger will need to bear corresponding responsibility under the following circumstances: 1. The passenger is the owner: If the passenger is the owner and knows that the driver does not have a driver's license. 2. The passenger is not the owner: The passenger is not the owner but has a driver's license and knows that the driver is unlicensed. In both cases, the passenger will be held accountable, and the responsibility is significant. In addition to facing the same fines and detention as the driver, the passenger's driver's license will also be revoked.
Was this review help?
13
5
Share
More Forum Discussions

What is the Difference Between an Electric Trunk and a Sensor-Activated Trunk?

Sensor-activated trunks and electric trunks differ in their opening methods. Below are the distinctions between the two types of trunks: Sensor-Activated Trunk: A sensor-activated trunk is equipped with a sensor beneath the vehicle's trunk, allowing the trunk to be opened or closed via sensor detection. Simply waving your foot under the sensor will open the trunk. Electric Trunk: An electric trunk can be electronically controlled to open and close. There is a door closing button inside the trunk lid. By pressing this button, the trunk lid can close automatically without any manual intervention. Trunk: The trunk serves as a storage compartment in a car, enhancing convenience in daily life. It typically contains a spare tire, a vehicle emergency kit, an onboard tool kit, a warning triangle, a fire extinguisher, and an emergency fuel tank release cable.
16
0
Share

What are the reasons why the Sagitar's idle speed remains at 1000 rpm after warming up?

The reasons why the Sagitar's idle speed remains at 1000 rpm after warming up are: 1. Throttle sticking or not closing properly; 2. Improper idle adjustment; 3. Additional air valve failure; 4. Idle control valve sticking or control circuit failure; 5. Coolant temperature sensor failure. Taking the 2021 Sagitar 1.4T as an example, it belongs to the compact car category, with body dimensions of: length 4753mm, width 1800mm, height 1462mm, wheelbase 2731mm, fuel tank capacity 50L, and curb weight 1410kg. The 2021 Sagitar 1.4T has a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L turbocharged engine, with a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.
4
5
Share

Does a CVT Transmission Require Idling to Warm Up?

CVT transmissions do not require idling to warm up. The principle of CVT transmissions: The engine's power is transmitted through a steel belt and the grooves of two cone pulleys, from the primary pulley to the secondary pulley, and then through the main reducer to the drive wheels, achieving power transmission. Maintenance methods for the transmission: 1. Regularly check the fluid level; 2. Do not skip gears when shifting up; 3. Do not force the transmission into neutral; 4. Do not shorten the idling warm-up time; 5. Avoid gear grinding when shifting. The functions of the transmission are: 1. To change the transmission ratio and expand the range of torque and speed variations of the drive wheels, adapting to frequently changing driving conditions, allowing the engine to operate under favorable conditions; 2. To enable the vehicle to reverse while the engine's rotation direction remains unchanged; 3. To interrupt power transmission using neutral, allowing the engine to start, idle, and facilitating gear shifts or power output.
16
0
Share

What Are the Effects of Cold-Weather Starting on Vehicles?

Cold-weather starting affects vehicles in the following ways: 1. The rotational resistance of the engine crankshaft significantly increases as the viscosity of the lubricating oil in the oil pan rises with lower ambient temperatures; 2. The viscosity and density of fuel increase; 3. The high viscosity and poor fluidity of lubricating oil prevent the oil pump from delivering it to friction surfaces in time, leading to dry friction during startup; 4. In cold environments, the wear on various vehicle assemblies is more pronounced. The correct starting method is: 1. After sitting in the driver's seat, press the start button to activate the ACC light, then press it again for a vehicle self-check; 2. Depress the brake and press the one-touch start button to ignite and start the engine. The functions of one-touch start include: 1. Eliminating the need for the original car key or remote to unlock the door; 2. Automatically closing windows when leaving the car; 3. Enhancing safety during night driving; 4. Providing convenient starting and a self-diagnostic protection feature for the original starting system.
8
1
Share

Why is Heat Shrinking Necessary for Car Window Tinting Film?

The primary reason lies in the manufacturing process of explosion-proof films. Since the electroplating direction is fixed during production, the shrinkage direction of the film during installation and heat shaping is predetermined. Bubbles can only be smoothly flattened by following this shrinkage direction to avoid creases, hence leading to horizontal-cut or vertical-cut heat shrinking methods. Below are relevant explanations: 1. Narrower sides: Generally, car windows have longer top/bottom edges and narrower left/right sides. Horizontal cutting distributes bubbles evenly along both sides, creating longer bubble lines that complicate installation. 2. Dry shrinking technique: When applying dry shrinking or other special techniques, the windshield typically uses horizontal-cut heat shrinking. This is because most current vehicle models have windshields exceeding 75cm in vertical height. Vertical cutting would leave excessive leftover material that often gets wasted due to prolonged improper storage or difficulty finding matching vehicle models – particularly costly for premium films. Thus, horizontal cutting better optimizes material cost efficiency.
6
2
Share

What are the reasons for the Wuling Rongguang's spark plugs being flooded?

The reasons for the Wuling Rongguang's spark plugs being flooded are: 1. Overly rich air-fuel mixture, high oil level or clogged air filter, abnormal carburetor supply; 2. Spark plug misfire, leakage, abnormal ignition by the igniter, abnormal high-voltage coil, weak spark, as well as faults in the charging coil and trigger coil inside the magneto, and short circuit or leakage in the ignition switch can also cause this. Taking the 2019 Rongguang V as an example, its body dimensions are: length 4415mm, width 1665mm, height 1850mm, with a wheelbase of 2720mm. The 2019 Rongguang V has a MacPherson strut independent front suspension and a leaf spring non-independent rear suspension. It is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 99ps, maximum torque of 140nm, maximum power of 73kw, and is paired with a manual transmission.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.