···
Log in / Register

How to deal with scratches on the plastic shell under the headlight?

6Answers
SanFaith
08/26/2025, 01:56:56 AM

Applying a paint pen of a similar color to the scratched area is known as the paint pen repair method. This method is simple, but the adhesion of the paint at the repaired area is insufficient, making it prone to peeling and difficult to last long. Using the traditional touch-up paint method to repair scratches. The downside is that it causes excessive damage to the original paint, takes too much time for repair, and the results are often unsatisfactory. Combining computer-mixed paint with new process techniques for deep scratch repair technology, this is a rapid technical repair method, but it requires accurate color matching.

Was this review help?
115
Share
LaFinley
09/08/2025, 04:30:05 AM

Last time, the plastic shell under the light of my car got scratched. After checking, I found it was only a surface scratch, which didn’t affect the overall appearance much. DIY steps: First, clean the affected area with soapy water to ensure no dust or oil residue remains; then gently sand it smooth with fine sandpaper (around 800 grit), being careful not to over-sand. Next, spray a layer of plastic-specific repair paint or use a touch-up pen, covering a slightly larger area to prevent color mismatch. After drying, the result was quite good, costing less than 50 yuan. If the scratch is deep or there are cracks, it’s better not to risk DIY—take it to a car repair shop for repainting or part replacement to prevent rainwater from causing rust. When parking, avoid getting too close to roadside curbs. Small scratches like this can worsen if left untreated, especially on older cars where plastic ages faster. It’s a good idea to check them during regular maintenance.

Was this review help?
2
Share
Expand All
EvanLynn
10/22/2025, 04:37:40 AM

As a car owner, I've experienced scratches on the plastic housing under the headlights multiple times. Generally, minor scratches can be ignored as they don't affect lighting safety. But if you care about aesthetics, it's better to spend a little money to fix them. Methods: Take it to a 4S shop or repair shop for an assessment - the cost is usually under 100 yuan. For DIY repairs, clean with automotive cleaner and apply plastic repair paste (don't use regular paint as it peels easily). Deep scratches may pose safety risks, like water accumulation corroding wiring during rain - I once had moisture form inside a scratched headlight cover, doubling repair costs. Remember: timely fixes save money and hassle. Regular car wax application protects the housing. Parking skills matter too - I always leave extra space.

Was this review help?
18
Share
Expand All
DiTessa
12/05/2025, 09:13:17 PM

After the plastic cover under the car light gets scratched, I first need to assess the severity of the damage. Minor scratches can be repaired with simple cleaning and applying plastic protectant, saving both time and money. However, for deep scratches, it's advisable to have a professional inspect it promptly to avoid long-term exposure leading to plastic corrosion or compromised lighting performance, which could pose driving risks. I once ignored a similar situation, resulting in water accumulation and rust, ultimately costing me hundreds more to replace the part. To prevent such issues: avoid obstacles when parking and maintain surface cleanliness during daily use. Safety is no small matter; though this part may seem minor, it can hide potential hazards.

Was this review help?
17
Share
Expand All
AuroraLynn
01/25/2026, 10:32:40 PM

Not long ago, the plastic shell under my car's light was also scratched. I tried a DIY repair solution. First, I thoroughly cleaned the damaged area at a car wash, then lightly sanded it evenly with fine plastic sandpaper, and sprayed specialized paint. After drying, the result was close to the original appearance. The whole process took half an hour and cost just a few dozen yuan. However, for deeper scratches, it's better to seek professional repair shops as they have more precise tools. Note that this area tends to accumulate dust, and untimely repairs may accelerate aging and lead to cracks. I recommend car owners to keep some simple repair tools handy for emergencies, which can also save unnecessary expenses.

Was this review help?
17
Share
Expand All
DeJeremiah
04/21/2026, 04:00:58 AM

I once scratched the plastic shell under my car light and felt a bit annoyed at the time. I searched online for repair tutorials and bought a DIY repair kit to try sanding and spray painting. The steps were simple: clean, sand smooth with sandpaper, and then apply paint. The result was decent, or you could just ignore it as a personal touch. However, if the damage is extensive or there are cracks, it's best to take it to a shop for repair—don’t delay to prevent water ingress during rain, which could corrode electronic components. For daily driving, it’s advisable to park away from rough surfaces and occasionally clean and maintain the shell to extend its lifespan.

Was this review help?
2
Share
Expand All
More Q&A

How many points are deducted for stalling once?

Stalling once will deduct 10 points. Below is relevant knowledge about stalling: Precautions to avoid stalling: When starting, do not release the clutch too quickly. The correct method is to press quickly and release slowly, allowing the clutch to gradually engage until reaching the semi-engaged state before stopping. Do not release the brake too quickly when starting, and avoid sudden braking while driving, otherwise the power cannot keep up, causing the car to stall. Reasons for stalling: Errors in the clutch release process, such as lifting the clutch too high or too quickly, may cause stalling. In addition to the points mentioned above, if the brake is not released when the clutch is halfway engaged, the engine power cannot keep up, which will also cause the vehicle to stall.
111
Share

How to Activate Cruise Control in a Skoda?

Skoda cruise control activation method is as follows: 1. When the vehicle is stationary or in motion, switch the cruise control from OFF to ON. At this time, a green cruise control icon will appear on the speedometer, indicating that the cruise function is activated. 2. Press the control switch to set the cruise control to standby. After accelerating to the desired speed, push the control lever downward to set the cruising speed. 3. To accelerate, push the control lever upward or press the accelerator pedal. 4. To cancel cruise control, lift the control lever upward, turn off the main cruise control switch, press the accelerator pedal, or lightly tap the brake. 5. After pressing the main cruise control switch, the cruise control icon will be displayed on the dashboard to indicate standby status.
111
Share

What Causes Weak Acceleration and Choking When Using Gas in a Gas-Converted Vehicle?

Weak acceleration and choking when using gas in a gas-converted vehicle may be caused by spark plug failure. Here are the relevant explanations: Spark plug failure: There are many factors that can cause vehicle hesitation or jerking, among which the most common is spark plug failure. The main component of natural gas is methane, which is less combustible compared to gasoline. Therefore, if gas-specific spark plugs are not replaced, it may lead to incomplete combustion of the gas, resulting in acceleration hesitation. Incorrect usage method: Additionally, when driving a gas-converted vehicle, it is important to pay attention to the usage method. During cold starts, the vehicle should be warmed up using gasoline first. Only when the water temperature reaches around 70 degrees should you switch to gas. This practice ensures smooth driving.
116
Share

Where is the trunk switch of the Roewe ei6 located?

The trunk switch of the Roewe ei6 is located below the small storage compartment on the left side of the steering wheel. Roewe is an automobile brand under the Shanghai Automotive Industry Corporation. Taking the 2019 Roewe ei6 as an example, its body dimensions are: length 4671mm, width 1835mm, height 1460mm, with a wheelbase of 2715mm, a fuel tank capacity of 38 liters, a luggage compartment capacity of 308 liters, and a curb weight of 1480kg. The 2019 Roewe ei6 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum power of 124 kW, and a maximum torque of 250 Nm, paired with a 10-speed mechanical automatic transmission.
106
Share

Can I still book if my subject three ranking is over 300?

This depends on the test center's capacity and how early you obtained the "Learning to Drive Certificate," meaning how early your file was established. It's difficult to estimate whether you can secure a booking. Below is relevant information: Subject Three Booking Ranking Rules: Users who successfully book an exam but cancel due to personal reasons will have their ranking time reset to the cancellation time. If both the second and third conditions apply, the most recent time will be used as the ranking time. Booking Success Time: You can check the acceptance status of your booking in the online progress section. Results are usually available three days before the scheduled exam date. If the booking is successful, you can print the booking confirmation. Note: Applicants must bring their ID to the scheduled test center at the designated time. Failure to attend on time will result in a failed exam. If you cannot attend at the scheduled time, you must apply to cancel the booking at the vehicle management office one day in advance.
109
Share

What are the procedures and processes for obtaining a driver's license?

The procedures and processes for obtaining a driver's license involve enrolling in a driving school, sequentially taking the subject one, subject two, and subject three exams. Upon passing all exams, you will be eligible to receive your driver's license. Below are the requirements and considerations for obtaining a driver's license. Requirements for obtaining a driver's license: Depending on the type of license applied for, there are specific age requirements. Additionally, there are clear regulations regarding various physical functions, all of which must be met to apply for a driver's license. Considerations for obtaining a driver's license: After passing the subject one exam, you must pass the subject two and subject three exams within the remaining three years; otherwise, your results will be invalidated, and you will need to re-enroll. Furthermore, there are only five attempts to register for the subject two and subject three exams. If you fail, you will have to reapply.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.