How to Deal with Not Wearing Seat Belts in the Back Seat?

3 Answers
MadisonLynn
07/25/25 8:43am
There are several ways to handle the behavior of not wearing seat belts in the back seat, depending on the situation. On highways: All vehicles: fine of 500 RMB, 2 penalty points; Expressways: key vehicles, fine of 500 RMB, 2 penalty points. On main roads: Key vehicles: fine of 200 RMB; Other roads: all vehicles are checked, front seat non-compliance results in a fine of 200 RMB, back seat non-compliance results in a warning/fine of 200 RMB. Penalties for drivers: For passengers not wearing seat belts in the back seat, the driver will also be fined. According to legal provisions, the driver has the obligation to inform passengers before the ride and cannot drive the vehicle if passengers are not wearing seat belts. Therefore, the legal responsibility lies with the driver.
Was this review help?
4
5
Share
ReedAnn
08/10/25 7:01pm
I've been driving for over 30 years and have encountered many instances of rear passengers not wearing seat belts. This is extremely dangerous - during sudden braking, people can be thrown forward and injured or hit the front seats. As the driver, it's my responsibility to ensure all passengers' safety. My approach is to stop the car, check, and immediately remind them to buckle up. If they refuse to cooperate, I absolutely won't drive. It's important to educate passengers about how seat belts protect the spine and head in accidents, especially at high speeds or in bad weather. Make it a habit to glance at the back seat before every trip. Sharing an experience: Once during a family trip, I didn't notice a child in the back wasn't belted, and during a sharp turn the child got injured. Since then, I insist everyone buckles up the moment they get in the car.
Was this review help?
15
5
Share
Expand All
LauraLynn
08/10/25 7:02pm
I am particularly concerned about traffic regulations. Not wearing seat belts in the back seat is illegal in many places, and drivers can be pulled over by the police and fined a significant amount. As a car owner, I usually remind passengers to buckle up as soon as they get in the car—it's a basic obligation and quite simple to handle: just pull over and clearly explain the legal requirements and safety implications. For example, children or elderly passengers often forget, so it's important to teach them the habit of wearing seat belts in a gentle yet firm manner, reducing both the risk of fines and enhancing safety. I recommend placing a reminder sticker inside the car or verbally emphasizing it before setting off. Developing this habit is beneficial for everyone.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

What is the weight of the BMW 5 Series body?

The BMW 5 Series body weighs 1740KG. Below are specific details about the BMW 5 Series: Exterior: The BMW 5 Series features a new wing-style chrome trim that runs through the LED wing-shaped headlights, widening the horizontal visual effect. The dynamic bumper surfaces and three-dimensional silver lower guard create a full and powerful front end. Powertrain: The BMW 5 Series is equipped with a 2.0T SIDI direct-injection turbocharged engine paired with a 9-speed HYDRA-MATIC intelligent transmission, delivering a maximum power of 191kW/5500rpm and a peak torque of 400N·m/3000-4000RPM, with a 0-100km/h acceleration time of 8.2 seconds.
3
1
Share

What to Do When a Car Engine Shakes?

Solutions for car engine shaking: 1. Slight shaking is normal, but if the shaking is severe, it needs to be checked. The most common cause of car shaking is a dirty throttle body or excessive carbon deposits in the fuel injectors; 2. Carbon deposits include cylinder carbon deposits, throttle carbon deposits, spark plug carbon deposits, and intake carbon deposits. These areas are directly related to the engine's power output. When there is too much carbon deposit inside the engine, the car's ignition energy decreases, and the intake efficiency drops, ultimately leading to symptoms such as engine shaking and weak acceleration; 3. If the starting mixture is too lean, it makes starting difficult. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits will be sucked into the cylinder by the engine's vacuum suction for combustion, making the mixture too rich. This results in an inconsistent mixture of combustible gases in the engine, causing idle shaking after a cold start.
11
4
Share

Why is there a sudden parking assist system malfunction warning?

Sudden parking assist system malfunction warnings are typically caused by a damaged radar control box, which can be resolved by replacing the control box. The parking assist system includes ultrasonic sensors embedded in the front and rear bumpers, each with a diameter of approximately 15mm. The ultrasonic detection signals emitted by the sensors reflect when they encounter obstacles. Upon receiving the reflected signals, the sensors promptly relay them back to the system for distance calculation, alerting the driver through audio and visual cues about the proximity of obstacles outside the visible range. When reversing, the parking assist system aids the driver in detecting obstacles and estimating the distance between the vehicle and the obstacles. It can identify objects outside the driver's line of sight and provide signals indicating the distance between the vehicle and these obstacles. Whether it's children playing behind the car or low-lying objects like bollards, fences, or fire hydrants, the system can detect them immediately. It is essential for all vehicles to be equipped with a parking assist system, as it helps drivers monitor areas that are otherwise invisible to them.
19
0
Share

How to Open a Car Center Console?

Method to open a car center console: First, remove the air conditioning control module, then use a plastic pry tool to loosen the upper cover panel of the center console. After removing the upper cover panel, use the plastic pry tool to loosen and remove the air vents on the center console. This completes the removal of the entire center panel. The method may vary for different car models. Below is some related information about car center consoles: 1. The car center console is where comfort and entertainment devices like air conditioning and audio systems are controlled. It includes the central locking system, allowing the driver to control all door locks and window operations. 2. The central locking system primarily has three functions: central control, speed control, and individual control. The driver can control all door locks, while doors automatically lock when the vehicle reaches a certain speed. Other doors have independent switches for individual control. 3. The car center console also includes the central control panel, which houses various vehicle controllers like the audio control panel. There are many types of central locks installed in cars, but their basic components mainly consist of door lock switches, door lock actuators, and door lock controllers.
8
3
Share

How many points are deducted for failing to yield to a school bus while driving a motor vehicle?

Failing to yield to a school bus as required while driving a motor vehicle refers to the situation where a motor vehicle does not comply with the regulations stipulated in the "School Bus Safety Management Regulations" to yield to a school bus during its operation. This offense will result in a fine of 200 yuan and a deduction of 6 points. Below is more information regarding the "School Bus Safety Management Regulations": 1. When a school bus stops on the road to pick up or drop off students, it should park on the right side of the road, activate the hazard warning lights, and display the stop sign. If the school bus is parked on a road with only one motor vehicle lane in the same direction, vehicles behind must stop and wait, and are not allowed to overtake. 2. When a school bus is parked on a road with two or more motor vehicle lanes in the same direction, vehicles in the lane behind the school bus and in adjacent lanes must stop and wait, while vehicles in other lanes should slow down and pass. Vehicles stopped behind the school bus must not honk or use lights to urge the school bus to move.
9
5
Share

The Origin of BYD's Chinese Name

Initially named Yadi Electronics, the company later added a 'B' (Bi) in front of the name when participating in exhibitions where manufacturers' names were arranged alphabetically by their English initials, thus becoming BYD Electronics. Here is some relevant information about BYD: 1. Brand Introduction: BYD Auto adheres to a development path of independent research, independent production, and independent branding, aiming to create truly affordable and high-quality vehicles for the people. The product designs incorporate advanced international trends while aligning with the aesthetic values of Chinese culture. 2. Logo Meaning: The new BYD logo no longer uses the original blue-and-white color scheme. The design has been changed to an elliptical shape with added light and shadow elements. Significant changes have been made in font arrangement and graphic colors, highlighting BYD Auto's innovation, technology, and the essence of corporate culture, infusing the BYD brand with new meaning and vitality.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.