···
Log in / Register

How to Start the Chery Ant?

1Answers
MacJanelle
07/29/2025, 11:53:13 AM

The procedure to start the Chery Ant is as follows: 1. Fasten the seatbelt, shift the gear, and press the brake pedal. 2. Turn the key clockwise to the start position until all self-check lights on the dashboard illuminate. 3. Wait for 5 seconds until all self-check lights go off, then continue turning the key clockwise to the end and release. 4. Confirm that the READY light is on, indicating the vehicle has started; check the remaining range. 5. Shift to D gear, release the handbrake, and release the brake pedal to start moving. Additional information: The 2019 Chery Ant Q1, under Chery New Energy, was officially launched on June 28. The new model largely retains the styling of the current version with only minor detail changes. It is still equipped with a 35kWh power battery pack, offering a comprehensive range of 301km.

Was this review help?
113
Share
More Q&A

Is it allowed by traffic police to install anti-rear-end flashing lights?

Currently, traffic police do not allow vehicles to privately install anti-rear-end flashing lights. Here are the relevant regulations: 1. Article 97 stipulates: Illegally installed alarms or marking lights will be forcibly removed and confiscated by the traffic management department of the public security organ, and a fine will be imposed. 2. Secure installation: The lights of motor vehicles should be installed securely, intact, and effective, and should not become loose, damaged, lose function, or change the direction of illumination due to vehicle vibration; all light switches should be installed firmly and operate freely, and should not switch on or off by themselves due to vehicle vibration. The position of the switches should be convenient for the driver to operate. 3. Marking lights: Except for turn signal lights, hazard warning signals, and marking lights installed and used by fire trucks, ambulances, engineering rescue vehicles, and police cars, other external lights are not allowed to flash.
111
Share

Is Aftermarket Catalytic Converter Effective?

Replacing with an aftermarket catalytic converter is not effective. The specific hazards of aftermarket catalytic converters are as follows: 1. Prone to damage: The operating temperature of a catalytic converter typically should not exceed 800°C. However, if a cylinder in the engine misfires, excessive unburned fuel gases will be present in the exhaust. These gases may ignite in the exhaust manifold, causing the catalytic converter to fail or be damaged due to excessively high temperatures. 2. Environmental pollution: Aftermarket catalytic converters have poor exhaust purification efficiency, which not only causes significant pollution and harm to the environment and human health but also leads to deposits on the active surfaces of the oxygen sensor and catalytic converter within the catalytic converter. This can result in 'lead poisoning' of the oxygen sensor and a substantial decrease in the purification efficiency of the catalytic converter, eventually leading to its failure.
109
Share

What is the optimal height for car seats?

Car seats should be adjusted to the following position: leave a gap of 1-2 fists between the top of your head and the car roof (this may vary slightly depending on the vehicle model), ensuring that your eye level is positioned slightly above the center of the vertical distance of the front windshield. Below are relevant details: 1. Car seat adjustments can be manual or electric, and the available adjustment functions may differ based on the vehicle's configuration. After entering the car, the first step is to adjust the seat height. The seat height should provide a clear forward view without being obstructed by the steering wheel while allowing clear visibility of important gauges and street signs. 2. If the seat is too high, sudden braking or uneven road surfaces may cause the driver's head to hit the roof. If the seat is too low, even with the correct fore-aft adjustment, extra effort may be required to operate the pedals, making it inconvenient. Additionally, a low seat position hinders the driver's ability to observe the road ahead.
105
Share

What are the differences between Mitsubishi Black King Kong and Leopard Black King Kong?

The differences between Mitsubishi Black King Kong and Leopard Black King Kong are as follows: 1. Different appearance: Leopard Black King Kong has the appearance of V33, while Leopard Qibing has the appearance of V31. Black King Kong comes with fog lights and original side skirts with step boards, whereas Qibing requires aftermarket installation. 2. Different engines: Black King Kong uses Mitsubishi's 4G64 engine (2.4L), while Qibing uses Toyota's 4RB3 engine (2.2L). 3. Transfer case differences: Qibing has an electronic transfer case, while Black King Kong has a mechanical one, which offers a longer lifespan. 4. Chassis differences: Black King Kong features a MacPherson strut front suspension and a leaf spring rear suspension. Qibing has a double-wishbone torsion bar front suspension and a non-independent leaf spring rear suspension. Due to its lower price, Qibing offers a higher cost-performance ratio.
110
Share

Can the 10th Generation Accord be started via smartphone control?

The 10th Generation Accord cannot be started via smartphone control, but it can be retrofitted. Below is an introduction to the 10th Generation Accord: 1. Launch Date: On April 16, 2018, the all-new Honda Accord, the 10th generation, was officially launched in China. 2. The Spirit of Accord: As the embodiment of Honda's 'Innovation' spirit and global leading technology, the Accord continues to create new value and has won the trust of 19 million users worldwide. In 1999, the 6th generation Accord entered China, marking the first time the latest and most advanced global model was simultaneously introduced to the Chinese automotive market. Over the 15 years since its entry into China, the Accord has consistently adhered to vertical generation replacement and continuous evolution, earning the trust of over 1.5 million Chinese car owners.
101
Share

What are the new regulations for new vehicle annual inspections?

New regulations for new vehicle annual inspections, effective from November 20, 2020, change the inspection frequency for non-commercial vehicles aged 6 to 10 years from annual to biennial inspections. Below are detailed explanations of the new regulations: 1. Within 6 years: If your vehicle is still within 6 years, it can be exempt from inspection twice (inspection labels must be applied for every two years, but no on-site vehicle inspection is required). 2. 6 to 10 years: If your vehicle falls within this range, an on-site inspection is required. In the 8th year, an on-site inspection is mandatory, while in the 9th year, you should inquire whether an on-site inspection can be waived. 3. Over 10 years: The original inspection cycle still applies, meaning vehicles aged 10-15 years must be inspected annually, and those over 15 years must be inspected every six months.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.