···
Log in / Register

How to Deal with Foggy Windows When Using Air Conditioning in Summer?

6Answers
AmirAnn
07/29/2025, 07:24:22 AM

There are two solutions to foggy windows when using air conditioning in summer: 1. Turn on the defogging mode, set the fan speed to maximum, turn on the AC switch, and then adjust the temperature to low, and the fog will disappear; 2. Wiping the inside of the windshield with a cloth dipped in detergent or a special anti-fog agent can also effectively prevent window fogging. The functions of car air conditioning are as follows: 1. Cooling, heating, ventilating, and purifying the air inside the car; 2. Providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety.

Was this review help?
107
Share
DelKaden
08/13/2025, 02:51:14 PM

It's really annoying when the windshield fogs up with the AC on in summer. I used to encounter this a lot when I first started driving. Basically, it happens when hot and humid outside air hits the icy-cold windshield, causing moisture to condense into tiny droplets. From my experience now, as soon as I notice fogging, I immediately turn up the AC fan speed to maximum and adjust all vents to blow directly at the windshield. Remember to press the A/C button for cooling and dehumidification, and never use recirculation mode – you need fresh air intake to bring in dry air. If I'm in a hurry, I quickly wipe the inside of the glass with a dry cloth to at least clear the view ahead. Here's a little trick: when washing the car, wipe the inside of the windshield with soapy water – after it dries, it forms an anti-fog film that works surprisingly well based on my tests. These methods always help me solve the problem quickly.

Was this review help?
4
Share
Expand All
OEsther
10/08/2025, 12:09:54 AM

Windshield fogging is actually a condensation phenomenon caused by the temperature difference between the inside and outside of the car. Once I understood the principle, I stopped panicking. The most effective method is to activate the defogging mode of the air conditioner, usually marked by a fan-shaped button. The air conditioner directly blows cold air onto the glass, and the cold air can quickly remove moisture. I recommend setting the temperature not too low, around 22 degrees is just right, otherwise, excessive temperature difference can worsen the fogging. You can also try slightly opening the window for ventilation for 10 seconds to balance the internal and external humidity. For daily prevention, I usually turn on the external circulation for ventilation for a minute before starting the air conditioner to reduce sudden cooling-induced condensation. By the way, avoid placing wet clothes or umbrellas inside the car, as lower humidity naturally reduces fogging.

Was this review help?
7
Share
Expand All
SanArya
11/21/2025, 12:29:23 AM

Don't panic when encountering windshield fogging. I usually handle it in three steps: first, press the defog button and turn on the air conditioner's cold air at full blast, directing the airflow straight at the glass; if the fog is light, open the diagonal windows for a few seconds to ventilate; when parked, use a dedicated anti-fog spray to wipe the glass, saving time and effort. Remember, in summer, avoid setting the air conditioner too low—around 25 degrees is safest, as large temperature differences between hot and cold can cause more fogging. Also, check if the air filter is damp, as a moldy filter can increase cabin humidity. These tricks are simple and practical, right? I use them every day on my commute.

Was this review help?
2
Share
Expand All
GabriellaMarie
01/11/2026, 02:05:33 AM

In recent years, I've noticed that fogging often occurs during the rainy season. Here are some practical tips: Don't immediately close the windows and turn on the AC after getting in the car. First, open the doors to ventilate before turning on the air conditioning to minimize temperature differences. While driving, it's best to set the AC temperature to a moderate level, not too cold to be uncomfortable. In case of sudden fogging, the quickest solution is to press both the AC button and the windshield defog button simultaneously – cold air can clear the fog in just 5 seconds. I usually use an anti-fog towel to wipe the windows, which works better than a regular cloth. Another small habit: Turn off the AC and switch to natural airflow 5 minutes before finishing using the air conditioning, allowing the windows to gradually return to room temperature. This makes it less likely for sudden fogging to occur the next time you drive. These simple steps make things much easier.

Was this review help?
16
Share
Expand All
LenaLynn
04/07/2026, 11:25:16 PM

Windshield fogging is a serious safety concern that I take very seriously. When fog appears, I immediately turn on the air conditioning at maximum fan speed directed at the glass, making sure to activate the cooling and dehumidifying mode, as this is the most effective method. Then, I switch the air circulation to external to allow dry air to continuously enter. If the fog is particularly heavy, I turn on the hazard lights and pull over to deal with it, as impaired visibility is extremely dangerous. Regularly, I check the door seals and replace any damaged ones promptly to prevent moisture from seeping into the cabin. I also replace the air conditioning filter every quarter, as a damp old filter can actually contribute to fogging. By maintaining these habits, I rarely have to worry about fogging anymore.

Was this review help?
9
Share
Expand All
More Q&A

What Causes the Fuel Pump to Stop Before the Tank is Full?

Fuel pump stopping before the tank is full is usually caused by a blocked vent pipe or fueling too quickly. The reasons and solutions are as follows: Blocked Vent Pipe: During refueling, the fuel nozzle is inserted into the fuel tank's filler neck. The nozzle has a vent hole connected to a vent pipe. When the tank is full, the vent hole gets blocked, signaling the system to stop fueling. However, if excessive gasoline vapor is generated during fueling, it can clog the vehicle's charcoal canister, preventing complete vapor discharge. This leads to the vent hole being obstructed by a large amount of gasoline vapor, creating high pressure. The system then mistakenly assumes the tank is full and stops fueling, causing the pump to shut off prematurely. Solution: Regularly maintain the charcoal canister. Fueling Too Quickly: If fuel is pumped too quickly, gasoline may spray out of the tank. This not only prevents the tank from being filled completely but also results in fuel loss, causing the pump to stop prematurely. Solution: Press the accelerator pedal first, then the brake pedal, turn the ignition key, and hold it for a while to allow the engine to expel excess fuel.
106
Share

What Are the Reasons Why the Car Doesn't Respond When the Key Is Pressed?

The reasons why the car doesn't respond when the key is pressed are as follows: Dead key battery: If the key battery is dead, you need to remove the mechanical key, locate the gap in the plastic shell, and use the mechanical key to pry open the remote key along the gap. Magnetic interference: If there is radio interference, the car's remote key may not unlock the door. In this case, remove the mechanical key and use the mechanical lock to open the door. Car's anti-theft system is activated: Once the anti-theft system is activated, the car cannot be unlocked with the key. If this happens, you can use the mechanical key on the remote key to unlock the door. The mechanical lock on the door is hidden; use the mechanical key to pry off the shell on the door handle to reveal the hidden mechanical lock.
102
Share

What are the pros and cons of sunroof ice armor?

The advantages of sunroof ice armor include UV blocking and explosion-proof functions, while the disadvantages are too many uncertainties. The specific pros and cons of sunroof ice armor are as follows: Advantages of sunroof ice armor: Sunroof ice armor is made of TPU material, which is 5 times thicker than heat insulation film. Its infrared blocking rate is 91%, heat insulation rate is 78%, and UV blocking rate reaches 99%. When driving in summer, it provides an excellent experience for passengers inside the car. Sunroof ice armor also has an explosion-proof function. Even if the sunroof glass breaks, it will not cause injury to passengers due to broken glass. Disadvantages of sunroof ice armor: This product is still in its early to mid-stage, and its stability needs further testing over time. Due to factors such as excessive heat, rain, and oxidation, it is uncertain whether hydrolysis will occur when removing it. Additionally, since sunroof glass itself comes with a heat insulation coating, further research is needed to determine whether coating peeling or other phenomena will occur upon removal.
101
Share

What is the main gas used in airbags?

Automobile airbags are filled with nitrogen gas, which inflates within 0.1 seconds. The generation of nitrogen and the function of airbags are as follows: Generation of nitrogen: The airbag contains solid sodium azide, which rapidly produces a large amount of nitrogen gas upon impact. The chemical reaction formula is NaN3=NaH+N2. Function of automobile airbags: In the event of a traffic accident, automobile airbags help reduce the severity of injuries to the chest, head, and face during a collision. While the vehicle is in motion, the sensor system continuously sends speed change information to the control unit. If the measured acceleration, speed change, or other indicators exceed predetermined values, the control unit sends an ignition command to the gas generator, or the sensor directly controls ignition. After ignition, an explosive reaction occurs, producing N2 or releasing compressed nitrogen from the gas storage tank to fill the airbag. When the occupant comes into contact with the airbag, the damping effect of the airbag's exhaust holes absorbs the collision energy, thereby achieving the purpose of protecting the occupant.
103
Share

What is the reason for the car's engine speed increasing but the vehicle speed not increasing?

The reason for the car's engine speed increasing but the vehicle speed not increasing is clutch slippage. The specific reasons and solutions are as follows: Specific reasons for high engine speed but no increase in vehicle speed: The common main reasons are problems with the clutch and transmission. The clutch acts as an intermediary for power transmission between the engine and the transmission. If the clutch friction plate slips, it will result in a loss of power. Manual transmissions have high transmission efficiency. If there is no problem with the clutch, then the fault lies with the output shaft or the meshing gears of the gear. Solutions for high engine speed but no increase in vehicle speed: First, check the level of the transmission hydraulic oil. If the oil level is too low or too high, it needs to be adjusted promptly. Then, check whether the transmission is still slipping. If it is still slipping, the quality of the hydraulic oil should also be checked. If the hydraulic oil is brown-black or has a burnt smell, it indicates that the friction plates of the clutch or brake or the brake band are burnt. In this case, the transmission needs to be disassembled for repair.
110
Share

Can the Rear Seats of the Roewe i5 Be Folded Down?

Roewe i5's rear seats can be folded down. Locate the pull strap on the backrest of the rear seat near the door and pull it up. The Roewe i5 is a compact car produced by SAIC Motor. Taking the 2020 Roewe i5 Manual Linghao Edition as an example, its body dimensions are: length 4601 mm, width 1818 mm, height 1489 mm, with a wheelbase of 2680 mm and a fuel tank capacity of 445 liters. The 2020 Roewe i5 Manual Linghao Edition is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, delivering a maximum horsepower of 120 hp and a maximum power of 88 kW, paired with a 5-speed manual transmission.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.