···
Log in / Register

How to Conduct Annual Inspection for a New Car After 2 Years?

6Answers
StLeo
07/28/2025, 06:55:18 PM

Annual inspection process for new cars after 2 years: 1. The safety inspection agency uploads the vehicle inspection documents to the online vehicle inspection center for review; 2. The safety inspection agency prints and stamps the inspection pass mark according to the instructions from the inspection center; 3. Collect the vehicle license and inspection pass mark at the safety inspection agency's window. According to the regulations on the application and use of motor vehicle driving licenses, motor vehicle drivers must regularly undergo inspection at the traffic management department of the public security authority in accordance with laws and administrative regulations. When renewing a motor vehicle driving license as per these regulations, the driver must undergo inspection by the traffic management department of the public security authority. Vehicle annual inspection refers to a mandatory inspection for all vehicles that have obtained official license plates and vehicle licenses.

Was this review help?
115
Share
McAndrew
08/11/2025, 10:18:19 PM

When your new car reaches its second year, it's time for the annual inspection. I just went through this with my car last year. Remember to bring your vehicle license, original ID card, and a copy of the compulsory traffic insurance policy – missing any one of these can cause trouble. I recommend checking nearby motor vehicle inspection stations in advance. Many places now support online appointments, which you can handle directly through a mobile app to avoid early morning queues. At the station, staff will check key safety points like whether the lights are functioning properly, brake sensitivity, tire wear level, and whether exhaust emissions meet standards. The vehicle must not have any modifications, such as added headlights or altered exhaust systems – these need to be restored to pass inspection. The inspection usually takes about an hour, costing a few hundred yuan. If there are any unresolved traffic violations, the system will reject the inspection, so check your records and pay any fines in advance using the traffic police app. The annual inspection ensures safe driving and prevents accidents, so don't procrastinate. Once completed, the stamped inspection is valid for one year, and you just need to do it again next year – simple and reassuring.

Was this review help?
20
Share
Expand All
XavierLee
10/01/2025, 12:50:05 AM

My car just turned two years old, and I went for the annual inspection last week. The whole process went quite smoothly. First, prepare the necessary documents: the vehicle license, personal ID card, and compulsory traffic insurance policy—none of these can be missing. Drive directly to the local inspection station, preferably on a weekday morning when there are fewer people to avoid long queues. The inspection includes basic items like lighting tests, brake system checks, steering device examination, and emission measurements. If the vehicle has been illegally modified, such as alterations to the engine or exterior parts, it must be restored to its original condition to pass. I’ve seen a few friends get stuck at this step and end up wasting their trip. Remember to settle all unpaid traffic fines, otherwise, the system will automatically block the inspection. The entire process takes about 90 minutes, and the cost usually ranges between 300-500 yuan. Safety comes first—after passing the inspection, I feel more secure driving, and it also avoids the hassle of being checked on the road.

Was this review help?
8
Share
Expand All
ElliotDella
11/14/2025, 01:37:49 AM

As an automotive industry professional, new vehicles must undergo annual inspection after two years. The process generally involves the following steps: bring the vehicle registration certificate, ID card, and compulsory traffic insurance certificate to an authorized inspection station; the station will check items such as lights, brakes, tires, and emissions; ensure there are no modifications or severe wear; handle all traffic fines to avoid rejection. The process can take as little as one to two hours, with reasonable fees. Upon completion, the vehicle will be stamped and can be driven normally, enhancing safety protection.

Was this review help?
16
Share
Expand All
JulianMarie
01/04/2026, 03:20:39 AM

My car has been with us for two years now, so it's time for the annual inspection to avoid any unexpected issues. Remember to bring the vehicle registration certificate, ID card, and compulsory traffic insurance policy to the inspection station. I recommend going during non-peak hours in the afternoon to avoid crowds. The inspection covers key areas like lighting, braking function, and emission control. If you've made any modifications, such as installing larger rims, make sure to restore them to the original condition to prevent complications. The cost is usually a few hundred yuan, and don't forget to settle any traffic violations beforehand. Overall, it's a simple and hassle-free process. Regular annual inspections ensure safer family trips and reduce risks. I always book an appointment in advance and get it done with ease.

Was this review help?
6
Share
Expand All
VanErin
04/01/2026, 03:24:35 AM

After driving a new car for two years, it's time for the annual inspection. As working professionals with limited time, we can save queuing by making an online appointment in advance. Prepare the vehicle license, ID card, and compulsory traffic insurance documents, then drive directly to the station. Key items to be checked include proper lighting, brake response, and emission standards. Illegal modifications are not allowed, and excessively worn tires are also unacceptable. Clearing any traffic violation records is a prerequisite. From entry to completion, it took me just one hour—efficient and worry-free. Once done, it ensures road safety, and remember to come back on time next year—simple and smooth.

Was this review help?
17
Share
Expand All
More Q&A

At What Water Level Will the Engine Take in Water?

There is a risk of engine water intake when the water level exceeds 20 centimeters. For ordinary sedans, when the water level reaches 20 centimeters (for SUVs with higher ground clearance, this threshold increases to 30 centimeters), the engine may take in water. Water can enter the engine through two main pathways: 1. Low air intake position: The engine's air intake inlet is positioned low, allowing water to be sucked into the engine when the vehicle drives through water. 2. Exhaust outlet below water level: If the exhaust pipe outlet is submerged below the water level, water can be drawn into the engine through the exhaust. Below is relevant information: 1. If water enters the engine, it will inevitably stall: Since water in the cylinders lacks lubricating properties, attempting to restart the engine blindly after stalling may cause severe damage (e.g., cylinder scoring) and total engine failure. The correct procedure is to push the vehicle to a higher, dry area, contact your insurance company, and have the car towed to a repair shop for inspection. 2. Check all vehicle fluid systems: After water exposure, fluids may foam or become contaminated, losing their lubricating properties. Additionally, water may carry sand particles, accelerating engine wear. Prompt cleaning and fluid replacement are necessary. After inspection, clean electrical connections in the engine bay to prevent corrosion and sand residue. Key areas to clean include the fuse box, sensor connectors, and areas where water may accumulate. Once these steps are completed, conduct a road test at low to medium speeds, listening carefully for abnormal engine noises. If unusual noises are detected, inspect engine bearings and rotating components for excessive wear to prevent further damage.
119
Share

Are Transmission Fluid and Gear Oil the Same?

Gear oil and transmission fluid are essentially the same, but due to different application systems, although their oil properties are quite similar, they are used in different locations, hence the difference in naming. Gear oil is typically used in gear transmission mechanisms such as automobile steering gears, transmissions, and drive axles. It differs from engine oil in terms of usage conditions, composition, and performance characteristics. Below are some relevant details about the two: 1. Due to the high surface pressure during gear transmission, gear oil plays a crucial role in lubricating gears, resisting wear, cooling, heat dissipation, preventing corrosion and rust, cleaning, and reducing gear surface impact and noise. 2. Transmission fluid is an oil product used to keep a vehicle's transmission clean, ensuring its normal operation and extending the lifespan of the transmission system. It provides effective lubrication even at low temperatures and reduces oil loss under harsh operating conditions. Depending on the transmission structure, transmission fluid is further divided into automatic transmission fluid and manual transmission fluid.
115
Share

What is the name of WEY cars?

WEY is a series of SUV models under Great Wall Motors, known as "Wei Pai" in Chinese. It originates from the English surname of Great Wall Motors' chairman, Wei Jianjun, and represents Great Wall's flagship high-end series. Currently, WEY focuses on three main models: 1. VV5. With a design philosophy transitioning from "surface to line," it enhances the sense of lines, making the visual space more expansive and dynamic. The interior is accentuated with brown and red highlights to create a fashionable texture. The 12.3-inch color LCD touchscreen not only strengthens the interactive experience but also delivers a stronger visual impact and a sense of technology. 2. VV6. It sets forging a beyond-class luxury SUV as the standard in terms of exterior design, interior features, and intelligent technology equipment. As the brand's first multifunctional product equipped with a four-wheel-drive system, it also highlights beyond-class 360° intelligent safety configurations, making it a synonym for Chinese multifunctional luxury SUVs. 3. VV7. It leverages the latest intelligent technology and new energy technology to provide users with diversified and personalized car-buying choices, creating an exceptional car ownership experience. VV7 leads the industry with its new design and 40 configuration upgrades, further solidifying its position as the "powerhouse of Chinese luxury SUVs." The new car incorporates the dynamic design of WEY RS7, blending "leopard-inspired bionics" elements with geometric array-style air intake grilles, showcasing a perfect fusion of strength and elegance.
114
Share

What to Do When Car Window Glass Makes Noise on Bumpy Roads?

Here are some solutions for addressing the issue of car window glass making noise when driving on bumpy roads: 1. Loose door screws or lifting bracket. To fix this issue, simply take the car to a 4S shop and have the staff tighten the loose door glass. When driving on bumpy roads, the car window glass may make noise, which is often caused by loose internal fastening screws or a detached lifting bracket. 2. Aging window glass sealing rubber strip, best to replace it directly. Aging door glass rubber strips are often one of the reasons for window noise. If the noise occurs in a new car, there's no need to replace the rubber strip immediately. Instead, purchase a lubricant online, apply it evenly on the rubber strip, and then try raising and lowering the window several times to see if the noise reduces. 3. Debris in the window glass guide rail. The solution is to use tools to clean out the debris in the guide rail.
112
Share

How many colors does the new Fit have?

According to the official introduction by GAC Honda, the new Fit comes in a total of 7 body colors: Taffeta White, Glacier Silver, Sky Blue, Ocean Blue, Blooming Orange, Ruili Red, and Fresh Green. Based on the market share of the new Fit, white is generally the most common. Details about the Fit are as follows: 1. The Fit is a compact A-class hatchback produced by GAC Honda. In terms of body dimensions, the 2018 Fit measures 4096 1695 1525mm in length, width, and height. 2. In terms of power, the Fit is equipped with a 1.5-liter naturally aspirated engine across all models, delivering a maximum horsepower of 131 HP, a maximum power of 96 kW, and a maximum torque of 155 N·m, with a 0-100 km/h acceleration time of 8.6 seconds. 3. In terms of fuel consumption, according to the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the Fit's combined fuel consumption is 5.7L/100km.
110
Share

What to Do When the Airbag Light Comes On?

Solutions for the airbag indicator light coming on are as follows: 1. If you want the airbag light to turn off, simply rotate the car key to the 'on' position. 2. If the airbag indicator light flashes for 5 seconds and then stays on while the vehicle is running, it indicates a malfunction in the airbag system. The owner should promptly take the vehicle to a 4S shop for inspection and repair. Below is some relevant information about airbags: 1. Airbags are configured differently in various car models, generally including front dual airbags, side airbags, head airbags, and knee airbags. 2. In the event of a collision, airbags can reduce the severity of injuries to passengers and prevent secondary collisions. They also help protect passengers from being thrown out of their seats in dangerous situations such as vehicle rollovers, thereby ensuring a certain level of passenger safety.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.