How to Clean the Gaps in Car Windows?

Is it acceptable to be one month late for the annual vehicle inspection?

Being one month late for the annual vehicle inspection is not acceptable, as vehicle inspections can only be conducted in advance. Below is relevant information about vehicle inspections: 1. Introduction: The annual vehicle inspection is a mandatory test for all vehicles that have obtained official license plates and registration certificates, conducted once a year in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." 2. Purpose: The annual vehicle inspection can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Before the inspection, some preparatory work is necessary (such as understanding relevant information, making online appointments, knowing the procedures, and being aware of vehicle-related issues) to ensure a smooth and successful inspection process.

5

0

Share

Is the problem serious if the vehicle is flooded but not started?

It depends on the extent to which the vehicle is submerged in water to determine whether the vehicle can be driven normally after the water recedes. The following are several situations of vehicle flooding: 1. The water level is below the vehicle chassis or slightly submerges the chassis: In this case, the problem is not too serious, and it generally does not affect the vehicle's starting and driving. 2. The water level rises above the chassis: If the door seals are not very good, water will enter the interior. What needs to be done at this time is to first clean up the accumulated water inside the vehicle, move the vehicle to a sufficiently ventilated high ground, and if the weather clears up, the vehicle can also be placed under the sun for thorough drying. After the mud and water inside the vehicle are cleaned up, professional maintenance personnel should be asked to check whether the vehicle's ECU is damaged. 3. The water level rises above the engine: At this point, the vehicle cannot be started. It should be noted that the engine's air intake will not close just because the engine is turned off, which means that if the water level rises above the engine, water will enter the engine. Once it is found that water has entered the engine, a repair shop should be called to tow the vehicle away. Moreover, if you have purchased flood insurance, once you start the vehicle on your own, the insurance company will not provide compensation.

12

1

Share

Where Are the Brake and Accelerator Pedals Located in an Automatic Transmission Car?

In an automatic transmission car, the left pedal is the brake pedal, and the right pedal is the accelerator pedal. Manufacturers designed this layout based on ergonomics to ensure drivers can react quickly in emergencies. Note: Both pedals should only be controlled by the right foot; never use the left foot to operate either pedal. Precautions for controlling the accelerator: When pressing or releasing the accelerator pedal, apply gentle force to ensure smooth and gradual movements. Select an appropriate gear to keep the engine running mostly at medium speed and with a larger throttle opening for fuel efficiency. Coordinate releasing the clutch with pressing the accelerator swiftly and precisely. Before stopping or turning off the engine, release the accelerator pedal first and avoid revving the engine abruptly. Braking precautions: Press the brake pedal gradually and avoid sudden braking to prevent the car from jerking forward. Brake early and maintain a safe following distance, anticipating road conditions ahead to brake in advance. For long downhill slopes, use the automatic parking system as an aid to prevent overheating of the brake pads. When braking during a turn, slow down by pressing the brake before entering the curve, then accelerate out of the turn. On rainy days or gravel roads, use intermittent braking (pump the brakes) to prevent skidding. Tips for new drivers: Check tires before driving: Since tires are the only part of the car in contact with the road, poor tire condition can lead to blowouts at high speeds, endangering safety. Drive at a steady speed. Avoid sudden deceleration or acceleration to give surrounding vehicles ample time to adjust. Always signal before overtaking. Use flashing high beams, honking, or other appropriate signals to alert the vehicle ahead. Maintain a safe following distance to avoid collisions if the car ahead brakes suddenly. Avoid using your phone while driving. If you miss an exit on the highway, never reverse or stop abruptly.

10

3

Share

Which way to turn the steering wheel for right reverse parking?

For right reverse parking, turn the steering wheel to the right. Below are the required items for different vehicle types in Subject 2 of the driving test: 1. Small cars C1/C2: The test items for small cars C1/C2 include reverse parking into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curves) as five mandatory items (some regions also have a sixth item of high-speed card collection). 2. Large vehicles A1/A2/A3/B1/B2: The test items for large vehicles A1/A2/A3/B1/B2 include stake driving, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, curve driving, right-angle turns, passing through a width-limited gate, navigating continuous obstacles, driving on undulating roads, making U-turns on narrow roads, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.

12

2

Share

What is the fuel consumption of the Mitsubishi ASX 2.0?

Mitsubishi ASX 2.0 has a fuel consumption of 8.5 liters per 100 kilometers. Here is an extended introduction: Brand Introduction: The Mitsubishi ASX is a compact SUV under the Mitsubishi brand. This model is equipped with two engines, one being a 1.6-liter naturally aspirated engine and the other a 2.0-liter naturally aspirated engine. The dimensions of the Mitsubishi ASX are 4366 mm in length, 1780 mm in width, and 1640 mm in height, with a wheelbase of 2670 mm. Power Introduction: The 1.6-liter naturally aspirated engine of the Mitsubishi ASX delivers 124 horsepower and a maximum torque of 149 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4000 rpm. It features MIVEC technology and multi-point fuel injection, and utilizes an aluminum alloy cylinder head and block.

20

5

Share

What is the wading depth of the new Santana?

The wading depth of the new Santana is 300mm. The wading depth of the new Santana is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the new Santana is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water intake; Based on the passage of the vehicle ahead, assess the underwater road conditions and choose an entry point. Observe the path taken by other vehicles and follow it at a low speed, avoiding sudden acceleration or deceleration; For roads prone to water accumulation, observe warning water level markers, trees, or the wheels and doors of other vehicles as reference points to judge the water depth before deciding whether to proceed; Know your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not enter the water recklessly; choose an alternative route instead.

9

1

Share

How to Clean the Gaps in Car Windows?

Is it acceptable to be one month late for the annual vehicle inspection?

Is the problem serious if the vehicle is flooded but not started?

Where Are the Brake and Accelerator Pedals Located in an Automatic Transmission Car?

Which way to turn the steering wheel for right reverse parking?

What is the fuel consumption of the Mitsubishi ASX 2.0?

What is the wading depth of the new Santana?

Where is the engine air intake of Audi A6 located?

Is 10 liters per 100 kilometers a high fuel consumption?

Where is the air intake of Audi A6 located?

Is the first speeding offense just a warning?