How to Check Tire Pressure in the Mazda 3 Axela?

[Sullivan]

The method to check tire pressure in the Mazda 3 Axela is as follows: When the system detects that one or more tires have low pressure, the low tire pressure warning light on the instrument cluster will illuminate. In vehicles equipped with a Driver Information Center (DIC), a "CHECK TIRE PRESSURE" message will also appear. If this message appears, you should immediately stop and check all tires for damage. After repairs, the Tire Pressure Monitoring System (TPMS) must be reset. The reset procedure is as follows: 1. For vehicles equipped with a Driver Information Center (DIC): a. Turn the ignition to the ON position. b. Press and hold the Gage button on the far right of the DIC until the instrument cluster screen displays "TIRE MONITOR SYSTEM." c. Press the SET/RESET button with the arrow until the message "TIRE MONITOR SYSTEM HAS BEEN RESET" appears. d. The reset is now complete. 2. For vehicles without a Driver Information Center (DIC): a. Turn the ignition to the ON position. b. Press and hold the Odo/Trip button to cycle through the odometer displays until only the total mileage is shown. c. Press and hold the Odo/Trip button again. After a few seconds, the low tire pressure warning light will flash. When you hear two beeps, the reset is complete.