···
Log in / Register

How to Check the Fuel Gauge on the Roewe i5?

6Answers
McCassidy
09/05/2025, 10:21:28 PM

Method to check the fuel gauge on the Roewe i5: If the needle is at the 'F' position, it indicates the fuel tank is full; at the 'E' position, it means the tank is empty. The fuel gauge of the Roewe i5 is integrated into the car's tachometer, located directly below the tachometer display. The Roewe i5 is a compact car developed and produced by SAIC Motor, featuring a front-engine, front-wheel-drive layout. In terms of body dimensions, the Roewe i5 measures 4601 mm in length, 1818 mm in width, and 1489 mm in height, with a wheelbase of 2680 mm. For safety features, the Roewe i5 is equipped with dual front airbags, tire pressure monitoring, ABS anti-lock braking system, brake force distribution, brake assist, traction control, electronic stability program, front seatbelt reminder, and ISOFIX child seat anchors.

Was this review help?
111
Share
GageFitz
09/17/2025, 10:28:11 PM

I've been driving the Roewe i5 for almost a year now. When I first got the car, I wasn't quite sure how to read the fuel gauge. Actually, it's quite simple: After starting the vehicle, there's a circular area in the middle of the dashboard with a fuel indicator that looks like a small gasoline can icon. The needle points to the remaining fuel level. The scale usually ranges from 'E' (Empty) to 'F' (Full), divided into four segments or more detailed grids. Normally, the needle gradually moves to the current fuel level and stabilizes within about 30 seconds. I make it a habit to check it every day before driving – as long as the needle is above the halfway mark, there's no urgent need to refuel. If the needle isn't accurate, it might be due to a dirty fuel sensor or impurities affecting the float. It's recommended to have technicians clean the fuel tank during regular maintenance. Never wait until the fuel gauge shows a red warning light to refuel, as that's bad for the fuel pump and risks running out of gas. Typically, after driving about 400 kilometers on a full tank, it's good to check again. Developing these good habits helps avoid potential problems.

Was this review help?
11
Share
Expand All
LaRafael
10/31/2025, 10:53:33 PM

As someone who enjoys tinkering with cars, I've studied the fuel gauge system of the Roewe i5. After starting the engine, the fuel gauge needle on the dashboard responds to resistance changes in the fuel sensor to display the remaining fuel level. Under normal circumstances, the needle position directly corresponds to the fuel level in the tank: the middle mark represents half a tank, while a full gauge indicates a full tank. Occasionally, if the needle sticks or becomes unresponsive, it's often due to the float getting stuck at the bottom of the tank or a short circuit in the wiring, requiring a check of the fuse or replacement of the sensor. I recommend verifying the fuel level before each long-distance drive, keeping the needle above the 1/4 mark to avoid burning out the fuel pump or breaking down. Simply put, after starting the car, watching the dashboard for 5-10 seconds will give you an accurate reading without needing any additional tools.

Was this review help?
5
Share
Expand All
DiEvangeline
12/14/2025, 10:02:04 PM

I drive my i5 to work every day, and checking the fuel gauge is a routine. The moment I start the car, the fuel gauge on the dashboard moves, with the needle pointing to the current fuel level: full on the right and empty on the left. A quick glance usually tells me if I need to refuel. There's also a small indicator light that turns yellow when the needle reaches the far left as a warning. Remember not to wait until the light comes on to refuel—it's better to stay ahead for peace of mind. Normally, checking every 400 kilometers is sufficient. Simple and hassle-free.

Was this review help?
20
Share
Expand All
LaOlive
02/03/2026, 10:57:22 PM

Safe driving is my top priority, and the fuel gauge is crucial when driving the i5. The central area of the dashboard features a fuel indicator bar. A few minutes after starting the car, the needle stabilizes to show the remaining fuel level: a full scale means safety, while dropping to 1/4 requires planning for a refuel. I particularly emphasize not waiting until the needle hits the bottom to act, as a faulty sensor could mislead you, and running out of fuel on the road is extremely dangerous. Make it a habit to check the fuel level every time you start the engine. For long-distance drives, inspect it every 200 kilometers to both protect the car and ensure safety.

Was this review help?
16
Share
Expand All
MacIan
04/29/2026, 03:20:42 PM

Just upgraded to the digital version of the i5, and the fuel gauge looks way cooler. After starting the vehicle, the digital display on the dashboard intuitively shows the fuel percentage or a progress bar, making it clear at a glance. Unlike the old needle that needed time to move, the digital version updates the data in seconds, directly telling you the remaining fuel percentage. If paired with the APP, you can even check it remotely on your phone, avoiding the hassle of forgetting to check before heading out. I've experienced minor delays, but a quick restart after refueling fixes it. Using this high-tech feature daily is quite convenient, saving time and being accurate.

Was this review help?
15
Share
Expand All
More Q&A

What Causes Motorcycle Throttle Hesitation?

Motorcycle throttle hesitation is often caused by ignition system malfunctions or spark plug carbon buildup. Ignition System: The performance of the ignition system significantly affects engine power, fuel consumption, and exhaust emissions. It typically consists of components such as the battery, generator, distributor, ignition coil, and spark plugs. If there are issues with the ignition system, the motorcycle may feel sluggish when accelerating and struggle to gain speed. Spark Plug Carbon Buildup: If the motorcycle experiences jerky acceleration at low speeds, the likely cause is carbon buildup on the spark plugs. The solution is simply to clean the carbon deposits. Spark plugs, commonly known as "fire mouths," function by discharging high-voltage pulses sent through the spark plug wires. This discharge creates an electric spark that ignites the air-fuel mixture in the combustion chamber by arcing across the gap between the spark plug's electrodes.
119
Share

Which accelerates faster, AWD or RWD?

AWD cars accelerate faster. AWD vehicles: All four wheels of an AWD vehicle generally receive power, so naturally AWD vehicles have stronger mechanical traction, resulting in better acceleration performance. There are three common AWD systems: full-time AWD, part-time AWD, and on-demand AWD. RWD vehicles: RWD vehicles only deliver power to the rear wheels. During acceleration, the rear wheels of RWD vehicles may experience wheel spin, which can reduce the vehicle's speed. However, RWD vehicles also have strong acceleration capabilities. As long as the throttle is properly controlled during launch to prevent excessive wheel spin, RWD vehicles can also achieve very fast speeds.
114
Share

Can the windshield wipers be used immediately after applying a film?

Windshield wipers can be used immediately after applying a film. Film is applied on the inside: The wipers are located on the outside of the front windshield, while the film is applied on the inside. There is no contact between the wipers and the film, so even with a newly applied film, there is no need to worry about the wipers touching the film during use. Precautions after applying the film: For vehicles with newly applied films, it is important to avoid rolling the windows up or down within one week or three to five days. This is because the film is applied using a wet method, and there will be moisture between the film and the window, which hasn't fully adhered yet. If the windows are rolled up and down frequently before the film has fully adhered, the increased friction may cause the film to shift, peel, wrinkle, or bubble.
115
Share

What is the reason for engine abnormal noise disappearing when lightly pressing the clutch?

The reason why the engine abnormal noise disappears when lightly pressing the clutch is due to the idle pre-damping function of the clutch or a problem with the clutch release bearing. Loose or detached release bearing: Since the release bearing may be loose or detached, when the engine vibrates, the loose release bearing vibrates along with it, causing abnormal noise. When the clutch is pressed, the clutch re-tightens, so the noise disappears. After releasing the clutch, the release bearing becomes detached again. Idle pre-damping function: The clutch has an idle pre-damping function, which can effectively eliminate the impact of unstable idle speed on the transmission, but it may also produce some noise when the clutch is released.
102
Share

Are Keyless and One-Button Start the Same?

Keyless and one-button start are not the same. Keyless Start System: The keyless start system allows the vehicle to be started without physically turning a key. The key can be kept in a bag or pocket, and the engine can be ignited by pressing a button inside the car or turning a knob. This system utilizes the most advanced Radio Frequency Identification (RFID) technology, automatically locking and unlocking the doors through the chip in the smart card carried by the owner. One-Button Start: The one-button start in a car is part of the intelligent vehicle system, serving as a button device that simplifies the ignition process and can also turn off the engine. This device can be retrofitted either at the original key lock position or as an independent panel.
113
Share

How Long Does It Take to Learn to Drive?

From learning to drive to obtaining a driver's license, the duration varies from several months to half a year, with many uncertain variables involved. Driving Study Certificate: After passing the Subject 1 exam, the vehicle management office will issue a driving skill qualification certificate, also known as the driving study certificate. With this certificate, students can participate in the training and exams for Subject 2 and Subject 3. 3-Year Validity Period: Note that the driving study certificate has a validity period of 3 years. Students must complete the Subject 2 and Subject 3 exams within this period. If the exams are not completed within the validity period, the passed subjects will be invalidated.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.