How to Charge a BMW Car Battery?

How many cylinders does the Dongfeng Fengxing Jingyi X5 engine have?

The Jingyi X5 is equipped with two engines, a 1.5T and a 1.6L, both of which are four-cylinder engines. The engine models are 4A91T and 4A92, respectively. Below are the relevant details: I. 4A91T Engine: 1. The actual displacement of the 4A91T engine is 1499ml, with 4 cylinders arranged in an L-formation and naturally aspirated. 2. The 4A91T engine has a bore of 75mm, a stroke of 84.8mm, a compression ratio of 9.5, and a DOHC valvetrain. 3. The 4A91T engine reaches its maximum power at 5500 RPM and its maximum torque at 4500 RPM. 4. The 4A91T engine uses multi-point fuel injection and is recommended to use 92-octane gasoline. II. 4A92 Engine: 1. The actual displacement of the 4A92 engine is 1590ml, with 4 cylinders arranged in an L-formation and naturally aspirated. 2. The 4A92 engine has a bore of 75mm, a stroke of 90mm, a compression ratio of 10.5, and a DOHC valvetrain. 3. The 4A92 engine reaches its maximum power at 6000 RPM and its maximum torque at 4000 RPM. 4. The 4A92 engine uses multi-point fuel injection and is recommended to use 92-octane gasoline.

11

4

Share

How to Use Lights in Snowy and Icy Weather?

In snowy and icy weather, you should turn on both front and rear fog lights as well as low beam headlights. The front fog lights are activated to ensure that oncoming vehicles and pedestrians ahead can correctly identify your vehicle for safe avoidance; the rear fog lights are turned on to allow following vehicles to accurately recognize your car, maintaining an appropriate distance and speed. Low beam headlights are used to help the driver observe the road ahead more clearly. Fog lights have strong penetration and high visibility, and they hardly produce the Tyndall effect. The light neither reflects off the fog to obstruct vision nor illuminates the nearby ground effectively. This is the key feature that distinguishes fog lights from other vehicle lights. Front fog lights are typically bright yellow, while rear fog lights are red—both colors being the most penetrating. However, the controls for fog lights are often hidden and require familiarity to operate correctly. In practice, many drivers tend to use hazard warning lights (flashers) during rain, snow, or heavy fog. However, theoretically, hazard lights should only indicate extreme deviations from the prescribed speed, alerting following vehicles that your speed is very slow or even stopped. Using them in rainy or foggy conditions is not very appropriate. When driving closely behind another vehicle, you must not use high beam headlights but only low beams, as high beams can impair the leading driver's visibility. To overtake a vehicle ahead, first signal with alternating high and low beams to inform the car in front. Once the leading vehicle yields, switch from high beams to low beams, activate the left turn signal, and proceed to overtake. After passing, maintain a safe distance before activating the right turn signal to return to the original lane, then turn off the signal.

8

3

Share

Can a Manual Transmission Car Be Converted to Automatic?

Manual transmission cannot be converted to automatic unless the same car model has an automatic version, and even then, it can only be converted to a semi-automatic (manual-automatic hybrid). The reasons are as follows: 1. The structure of the manual transmission and engine differs from that of an automatic transmission. Manual transmissions have a clutch, while automatics do not. Their operating principles are also different and not interchangeable. 2. When a car leaves the factory, all its designs are in the most optimal state, with components perfectly matched to the engine. Forced modifications can compromise safety. 3. According to Article 16 of China's 'Road Traffic Safety Law,' no unit or individual is allowed to alter the registered structure, construction, or characteristics of a motor vehicle without authorization.

17

5

Share

Is a Four-Wheel Alignment Necessary After Replacing All Four Tires?

Generally, replacing all four tires on a car does not require a four-wheel alignment. The specific details are as follows: 1. After replacing the tires, if the vehicle does not exhibit any pulling to one side during driving and the steering wheel remains straight, there is no need for a four-wheel alignment. However, wheel balancing is essential after tire replacement; otherwise, the car may experience vibrations while driving. 2. During driving, if you notice symptoms such as heavy or shaky steering, uneven tire wear (e.g., one-sided wear or patchy wear), it is advisable to check the wheel alignment values. If the deviation is significant, prompt maintenance is required. Therefore, four-wheel alignment is not inherently linked to tire replacement; it is often offered as a value-added service by tire shops to enhance customer satisfaction.

13

4

Share

What is the purpose of an exhaust pipe?

The exhaust pipe serves several functions: 1. It discharges the exhaust gases generated by the engine, reducing pressure. This is a crucial factor in ensuring the continuous operation of a vehicle. 2. It reduces noise. The entire exhaust system includes two muffler systems: the first is the exhaust manifold where gases exit the engine, and the second is the main muffler located at the tail end of the exhaust pipe. These two stages of muffling effectively reduce the noise of exhaust emissions to an acceptable level. 3. It filters exhaust gases to minimize pollution. A catalytic converter is installed in the middle section of the exhaust pipe. The materials inside it chemically react with harmful substances in the exhaust, thereby reducing air pollution caused by emissions. 4. It enhances the vehicle's aesthetic appeal, making it more visually pleasing.

10

4

Share

What are the reasons for the car air conditioning compressor not starting?

There are several reasons why a car air conditioning compressor may not start: 1. Short circuit or open circuit in the electrical system, which directly cuts off the power transmission path, preventing the electromagnetic clutch from properly regulating the compressor's operation. 2. The refrigerant and lubricating oil are mutually soluble and circulate back to the compressor through the system. If the Freon in the refrigerant is depleted, it can lead to insufficient oil return, reducing the compressor's lubrication effect and causing it to seize or damage. In this case, the refrigerant should be replenished promptly. 3. Prolonged operation under high-speed load conditions may cause premature mechanical wear of the compressor's components, rendering it inoperable. 4. Failure to clean the air conditioning system for an extended period can also be a cause, so regular cleaning is necessary.

9

3

Share

How to Charge a BMW Car Battery?

How many cylinders does the Dongfeng Fengxing Jingyi X5 engine have?

How to Use Lights in Snowy and Icy Weather?

Can a Manual Transmission Car Be Converted to Automatic?

Is a Four-Wheel Alignment Necessary After Replacing All Four Tires?

What is the purpose of an exhaust pipe?

What are the reasons for the car air conditioning compressor not starting?

What is the difference between National V and VI?

What are the steps for starting and parking an automatic transmission car?

What Are the Causes of Car Water Leakage?

What Causes Abnormal Noise in the Exhaust Pipe?