···
Log in / Register

How to Cancel the Maintenance Reminder on Lavida?

4Answers
VonDallas
07/29/2025, 12:33:49 PM

To cancel the maintenance reminder on Lavida: 1. Turn the ignition key to power on; 2. Press and hold the maintenance reset button; 3. Turn off the ignition; 4. Wait until the instrument cluster screen completely turns black, then turn the ignition key to power on again; 5. Release the button when the maintenance reminder automatically disappears. The Lavida is a compact 4-door 5-seater sedan with body dimensions of 4670mm in length, 1806mm in width, 1474mm in height, and a wheelbase of 2688mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. The suspension system features a MacPherson strut front suspension and a torsion beam rear suspension.

Was this review help?
115
Share
LaAriana
08/14/2025, 01:45:19 AM

I've owned my Lavida for five years and always cancel the maintenance reminder myself. The new Lavida is particularly simple: turn off the engine without pressing the brake, just press the start button to power on. Then hold down the 0.0 button on the dashboard for 10 seconds until the reset prompt appears on the display before releasing. The older Lavida models require using the steering wheel buttons to enter the vehicle settings menu, find the maintenance option, and select reset. A special reminder: if you've just had maintenance done, make sure the technician updates the oil data with the diagnostic computer, otherwise the next mileage calculation will be off. Recently, when helping my brother-in-law with his, I found that the 2023 model can be operated directly from the central control screen—it's getting more and more convenient.

Was this review help?
10
Share
Expand All
BrookeDella
10/12/2025, 04:29:10 AM

Last time I drove my brother's Lavida and encountered the maintenance reminder, I figured it out in the garage after 20 minutes. First, determining the model year is crucial. From my experience: For Lavida models before 2018, you need to turn the key to the power-on position without starting the engine, then press and hold the reset button at the lower right corner of the dashboard until the warning light flashes three times before releasing. For newer models with LCD dashboards, use the menu button on the right side of the steering wheel to navigate to the maintenance page, then press OK to confirm the reset. A little tip: Before resetting, it's better to adjust the odometer to display the total mileage for higher success rate. If there's still no response after two attempts, it might require the dealership's specialized equipment to match the vehicle's computer.

Was this review help?
11
Share
Expand All
OKayden
11/25/2025, 09:44:25 PM

To reset the maintenance reminder light on the Lavida, focus on three key points. For base models with mechanical instrument clusters, turn off the ignition, press and hold the small round button next to the fuel gauge, then power on for 10 seconds to see the prompt. For higher trims with multifunction steering wheels, access the settings menu via the left directional keys on the steering wheel. Many owners overlook the maintenance interval settings—after resetting, always verify in the system whether the next reminder mileage has been reset to 5,000 or 10,000 km. Last week, my neighbor struggled unsuccessfully for hours, only to discover the workshop forgot to reset the vehicle's maintenance record during the last service. In such cases, you'll need to visit a repair shop to clear the fault codes using OBD equipment.

Was this review help?
2
Share
Expand All
More Q&A

What does PSW mean in the automotive industry?

Part-Submission-Warrant refers to the Parts Submission Warrant, which is a document in the automotive quality system. Below is relevant information about automotive parts and accessories manufacturing: 1. Terminology explanation: The automotive parts manufacturing industry mainly refers to the 'National Economic Industry Classification'. Automotive parts and accessories manufacturing refers to the production of various components and accessories for motor vehicles and their bodies. 2. Main product categories: An automobile generally consists of four basic parts: engine, chassis, body, and electrical equipment. Therefore, automotive parts are derived from these four components. 3. Classification by part nature: six systems. These are the engine system, power system, transmission system, suspension system, braking system, and electrical system.
108
Share

What does 97w mean on a tire?

Tire 97w refers to the load index of the tire, where 'w' represents the speed rating of the tire. The speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions. Tires are one of the most important components of a vehicle, directly in contact with the road surface and working in conjunction with the vehicle's suspension to absorb shocks during driving, ensuring good adhesion between the wheels and the road, and improving the vehicle's traction, braking, and off-road capabilities. Precautions for using car tires include: 1. Pay attention to the degree of tread wear; 2. Avoid excessively high or low tire pressure; 3. Remove debris from the tread to prevent punctures that could lead to air leaks or blowouts; 4. Regularly rotate tires to prevent uneven wear.
114
Share

What are the five major types of automobile overall layout?

They are divided into five types: front-engine rear-wheel drive, front-engine front-wheel drive, rear-engine rear-wheel drive, mid-engine rear-wheel drive, and front-engine all-wheel drive. Relevant information about automobile engines is as follows: 1. Introduction: The automobile engine is the device that provides power for the car, serving as the heart of the vehicle, determining its power, fuel economy, stability, and environmental friendliness. Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines. 2. Classification: Depending on the power source, automobile engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid power systems, among others.
112
Share

What is the difference between Altima and Teana?

There is no difference between Altima and Teana. Altima is the English name for the domestic new Teana, and they are the same car. The new Teana is equipped with two engines: a 2.0-liter naturally aspirated engine and a 2.0-liter turbocharged engine. The maximum power of the 2.0-liter naturally aspirated engine is 117 kW, with a maximum torque of 208 Nm; the maximum power of the 2.0-liter turbocharged engine is 185 kW, with a maximum torque of 380 Nm. Teana is a flagship mid-to-high-end luxury sedan under NISSAN, combining Driving Technology and Comfort Technology with innovative technology, bringing the design concept of mid-size sedans to a new level.
117
Share

Does the E20CB engine have many problems?

There are not many problems, but there may be oil burning issues. Below is relevant information about Great Wall Motors: 1. Production locations of Great Wall Motors: Great Wall Motors currently has three vehicle production bases in Tianjin, Baoding, and Xushui, as well as under-construction production bases in Chongqing Yongchuan and Shandong Rizhao. In terms of R&D, it is building a global R&D layout centered in Baoding headquarters, covering Europe, Japan, North America, and India. 2. Philosophy of Great Wall Motors: Adhering to the corporate spirit of "making progress every day," Great Wall Motors consistently strives to create high-quality products, continuously optimize service experiences, and enhance customer satisfaction. It steadily aims to build a car brand that satisfies global consumers and becomes the pride of "Made in China."
107
Share

How to Check Tire Pressure on the 2019 New Sagitar?

The 2019 New Sagitar allows you to check tire pressure on both the central control display and the instrument panel. The vehicle is equipped with a tire pressure monitoring system, which enables real-time monitoring of tire pressure while driving, providing more comprehensive protection for driving safety. The standard tire pressure for the New Sagitar can be found on the label inside the fuel tank cap. For family cars, maintaining a tire pressure value between 2.3 and 2.5 bar is generally recommended. The 2019 New Sagitar is a spacious A+ class comfortable sedan that combines German craftsmanship with modern dynamic styling, offering an updated exterior design, a more comfortable interior space, enhanced safety features, more user-friendly configurations, efficient and agile driving performance, and the consistent quality of German engineering.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.