How to Adjust the Rearview Mirror of an Exam Vehicle?
1 Answers
Exam vehicle rearview mirror adjustment methods are as follows: 1. The rearview mirror adjustment button for the Subject 2 exam is located on the inner side of the front door and can be adjusted in four directions: up, down, forward, and backward. When adjusting forward and backward, the car body should occupy one-fourth of the rearview mirror area. The rearview mirror must be adjusted after the position is properly set and the posture is correct. 2. After getting into the car, adjust the seat and backrest to maintain a normal driving posture, then start adjusting the rearview mirror. The rearview mirror adjustment button is on the inner side of the front door and can be adjusted in four directions: up, down, forward, and backward. 3. Up and down adjustment is simple. For Subject 2, to see the ground markings clearly, press it to the lowest position. Here are some additional tips: 1. The Subject 2 exam consists of 5 items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and turning on a curve. A score of 90 or above out of the 5 items is considered passing. 2. After getting into the car, always remember to fasten the seat belt, adjust the seat and rearview mirror. The safety officer will come over to ask if you are ready and then help you start the exam. After the exam starts, try to slow down the speed, but you must not stop, otherwise you will fail directly. 3. After starting, remember to turn on the turn signal, otherwise points will be deducted. The first item is the most difficult: reversing into a garage. Before entering the exam area, adjust the distance between the car body and the left line. When reversing, turn the steering wheel quickly, and finally, make sure the entire car body is parked in the garage. Even if the car is a bit crooked, it doesn't matter as long as it doesn't cross the line, it's considered passing.
