How to Adjust the Rearview Mirror?

1 Answers
LeElle
07/25/25 3:54am
Here are the specific methods for adjusting the rearview mirror: 1. When you need to adjust the rearview mirror's angle, you can use the electric buttons inside the car. These buttons are located on the left side of the steering wheel and can adjust the left and right side mirrors. 2. Adjust the center rearview mirror. Adjust the left and right positions so that the left edge of the mirror just cuts to the right ear of the image in the mirror, and the up and down positions should place the distant horizon in the center of the mirror. Key points for adjusting the center rearview mirror: place the horizon in the middle and the ear on the left. Position the distant horizon along the central line of the center rearview mirror, then move it left or right so that the image of the right ear is just at the left edge of the mirror. 3. Adjust the left rearview mirror. For the up and down positions, place the distant horizon in the center, and for the left and right positions, adjust so that the car body occupies 1/4 of the mirror's area. Key points for adjusting the left rearview mirror: place the horizon along the central line of the mirror, then adjust the edge of the car body to occupy 1/4 of the mirror's image. 4. Adjust the right rearview mirror. Since the driver's seat is on the left, it is not easy for the driver to grasp the situation on the right side of the car. Additionally, due to the need for roadside parking, the right rearview mirror should leave a larger ground area when adjusting the up and down positions, occupying about 2/3 of the mirror. As for the left and right positions, adjust so that the car body occupies 1/4 of the mirror's area. Key points for adjusting the right rearview mirror: place the horizon at the 2/3 position of the mirror, then adjust the edge of the car body to occupy 1/4 of the mirror's image.
Was this review help?
19
1
Share
More Forum Discussions

How many degrees does the steering wheel turn to full lock?

Steering wheel full lock is 540 degrees, which is one and a half turns to full lock, with one turn being 360 degrees. The effects of turning the steering wheel to full lock include: damage to the power steering structure, accelerated wear of components, fatigue of the suspension system, and increased tire wear. The function of the steering wheel is: to convert the force applied by the driver to the edge of the steering wheel into torque and transmit it to the steering shaft. Precautions for using the steering wheel include: 1. Do not turn the steering wheel too forcefully or make sudden turns and returns; do not turn the steering wheel when the vehicle is stationary. 2. When driving on bumpy roads, hold the steering wheel firmly with both hands to prevent loss of control and accidents. 3. Reduce speed when turning. 4. When entering a curve, turn the steering wheel slowly according to the curve's radius.
10
4
Share

Can't I drive on the highway without ETC?

Cars without ETC can still drive on the highway because ETC is not mandatory. Since January 1, 2020, vehicles without ETC are no longer eligible for various toll reduction benefits and can only pass through manual toll lanes at toll stations. It might be a bit inconvenient during holidays. ETC is just a different toll collection method and has no bearing on whether you can drive on the highway. There are two toll collection methods on highways: manual toll collection and ETC toll collection. ETC stands for Electronic-Toll-Collection. To apply for ETC, you need to provide the original and photocopies of the vehicle owner's valid ID card and vehicle registration certificate. If the application is made by someone other than the owner, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is needed. Applicants must be between 18 and 60 years old, and the vehicle must be registered under an individual's name. How ETC works: The vehicle-mounted electronic tag installed on the windshield communicates with the microwave antenna in the ETC lane at the toll station. The system then settles the toll with the bank via computer networking technology, allowing the vehicle to pass through the highway or bridge toll station without stopping. Benefits of installing ETC: Time-saving: Avoid the hassle of waiting in line; Green and eco-friendly: Reduces noise and exhaust emissions since vehicles don't stop at toll stations; Cost-saving: Reduces wear and tear and fuel consumption by minimizing frequent starts and stops. Users also enjoy toll discounts; Improved efficiency: ETC lanes can theoretically increase passing efficiency by 2-3 times, making traditional ETC faster and more advanced. Compared to license plate payment, ETC technology is more mature and advantageous.
2
2
Share

What are the symptoms of a faulty steering ball joint?

The symptoms of a faulty steering ball joint are: 1. A clicking sound can be heard when turning; 2. You may feel a large gap in the steering wheel, and the direction may be unstable while driving; 3. In mild cases, it can cause unstable steering, and in severe cases, it can lead to the wheel suddenly slipping off, especially at high speeds. The steering gear is an important component in the car's steering mechanism, directly affecting the stability of the car's handling, the safety of operation, and the lifespan of the tires. The steering ball joint is a tie rod with a ball joint housing. The ball joint of the steering spindle is placed inside the ball joint housing, and the ball joint is connected to the edge of the shaft hole of the ball joint housing through the ball joint seat at its front end. The needle roller between the ball joint seat and the steering spindle is embedded in the groove on the inner hole surface of the ball joint seat, which helps reduce ball joint wear and improves the tensile resistance of the spindle.
2
5
Share

What are the reasons for the engine malfunction indicator light to illuminate?

The reasons for the engine malfunction indicator light to illuminate are: 1. Failure to perform regular maintenance, leading to increased operational burden on the engine; 2. Changes in the quality of lubricating oil during use, causing the oil to deteriorate; 3. Faults in the engine's spark plugs, ignition coils, fuel pump, or fuel line blockages. The steps to eliminate the engine malfunction indicator light are: 1. Turn off the engine, then turn the ignition switch to the 'on' position; 2. Open the hood and the fuse box cover, locate the 30A EFI fuse according to the diagram on the fuse box cover, remove it, wait a few seconds, and then reinstall it; 3. Turn off the ignition switch, turn it back to the 'on' position, and then start the car to eliminate the malfunction indicator light.
10
3
Share

How Often Should Mercedes-Benz Transmission Fluid Be Changed?

Mercedes-Benz transmission fluid should be changed every three years or 60,000 kilometers. It is essential to adhere to this schedule during regular vehicle use. Transmission fluid is a lubricant that maintains the cleanliness of the gear system, ensuring the proper functioning of the transmission and extending the lifespan of the transmission components. Mercedes-Benz is a German automotive brand renowned for its luxury and high performance, headquartered in Stuttgart, Germany, and is a member of the Daimler AG. Its product lineup includes a variety of passenger cars and medium to large commercial vehicles. Mercedes-Benz vehicles are not only known for their superior quality but also for their comprehensive range of models, currently producing the C-Class (mid-range sedans and coupes), E-Class (premium sedans and coupes), S-Class (luxury sedans and coupes), and the G-Class (SUV off-road vehicles).
9
0
Share

How to Turn on the Air Conditioning in an Accord?

Method to activate the air conditioning in a Honda Accord: First, press the car's air conditioning button, turn on the AC on the center console, and then rotate the temperature adjustment knob to the blue zone. AC stands for aircondition, meaning air control or air conditioning. After pressing the AC button in the car, the air conditioning compressor will operate in different modes to achieve cooling. The Honda Accord has a body length, width, and height of 4893mm, 1862mm, and 1449mm respectively, with a wheelbase of 2830mm. The interior storage space is practical, and the trunk has a large capacity.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.