···
Log in / Register

Until when can National V vehicles not be registered?

6Answers
OEliza
07/23/2025, 09:54:02 PM

National V vehicles cannot be registered when the National VI standard is implemented. The National VI standard was planned to be implemented nationwide on July 1, 2020, and July 1, 2023, respectively, but many regions have implemented the National VI emission standard ahead of schedule. Methods to check the emission standard include: 1. Check the motor vehicle certificate of conformity, which comes with the vehicle when it leaves the factory and clearly states the vehicle's emission standard; 2. Look for the vehicle's packing list, where the emission standard can be found in the vehicle information section; 3. Check the certificate of conformity, which includes exhaust emissions and indicates the corresponding emission standard; 4. Visit the Motor Vehicle Environmental Protection website, find the public query platform at the bottom of the homepage, enter the vehicle's VIN code and the last 6 digits of the engine number to check; 5. Inspect the vehicle's environmental protection label, where the emission standard is clearly marked on the back of the environmental protection label on the front windshield.

Was this review help?
101
Share
LeIvan
08/10/2025, 05:09:25 PM

I clearly remember that July 1, 2020 was the key implementation date for China's nationwide National VI emission standards. After that, newly produced National V gasoline vehicles basically couldn't be registered anymore. This matter is related to regional policies - major cities like Beijing, Shanghai, Guangzhou and Shenzhen implemented restrictions ahead of schedule in the second half of 2019. For used car transactions, some areas still allow National V vehicles to be transferred and registered, but it depends on local DMV regulations with many restrictions. I've talked to many car owners who complained about buying inventory cars that couldn't be registered, forcing them to quickly sell and switch to National VI vehicles. When buying a car, it's best to check the latest policies first - don't just go for cheaper National V new cars.

Was this review help?
9
Share
Expand All
Blake
09/23/2025, 11:36:45 PM

As a car owner, I inquired about this matter when handling procedures at the vehicle management office. The staff said that since 2020, new National V vehicles have been banned from registration. When I visited a 4S store to look at cars, the salesperson directly told me that the inventory of National V vehicles had long been cleared out at discounted prices. Now, if you want to buy a used National V vehicle, it still depends on where your household registration is. Big cities have stricter controls, while small cities may be more lenient. I've tried transferring my old car, but encountered troubles and still had to switch to a National VI vehicle. Don't try to save that little bit of money, or you'll just end up wasting your effort.

Was this review help?
14
Share
Expand All
AliceDella
11/07/2025, 12:48:44 AM

Environmental protection is quite important. When the China 6 emission standard was introduced in 2020, the registration of new China 5 vehicles was completely halted. Why? China 5 vehicles have higher exhaust emissions, which increase air pollution, prompting the government to enforce the standard upgrade. When buying a new car, don't consider China 5 anymore. Now, China 6 is cleaner and can even extend the vehicle's lifespan. Let's all support environmental protection and not add burden to the atmosphere.

Was this review help?
13
Share
Expand All
Martin
12/28/2025, 02:33:48 AM

Having been in the car sales business for over a decade, when the China 6 emission standards were implemented in 2020, the registration of China 5 new vehicles was directly frozen. All inventory cars had to be sold off at clearance prices. Now that I deal in used cars at my shop, I still have to remind buyers: registering a China 5 vehicle depends on the region—it's basically impossible in cities like Beijing, Shanghai, and Guangzhou, but might still be feasible in smaller counties. In short, I advise against touching China 5 new vehicles—the risks are too high.

Was this review help?
8
Share
Expand All
ArielLynn
03/25/2026, 10:37:13 PM

Emission standards have been continuously upgraded. China 5 was promoted in 2017, and by 2020, China 6 made its debut, halting new vehicle registrations under China 5. This change stems from environmental pressures, as China 6 technology offers greater emission reductions. Car owners must adapt, with the future China 7 standards being even stricter. Switching cars earlier can save trouble. Don't regret buying vehicles with older standards.

Was this review help?
1
Share
Expand All
More Q&A

Where is the cigarette lighter fuse located in the Buick Envision?

The cigarette lighter fuse in the Buick Envision is located in the fuse box near the front passenger seat. To remove the fuse, you don't need to pull it out directly with your hands - each fuse box comes with tweezers specifically designed for fuse removal. Both ends of the tweezers can be used to extract large and small fuses. The vehicle has three fuse boxes: one in the engine compartment, one near the front passenger seat, and one in the rear trunk area. As General Motors' new global strategic model, the Buick Envision's exterior design inherits the essence of the ENVISION Vision concept car. The vehicle measures 4667mm in length, 1839mm in width, and 1694mm in height, with a wheelbase of 2750mm.
103
Share

What are the reasons for the airbag light on the car?

The reasons for the airbag light on the car are: damage to one of the components such as the sensor, microprocessor, electronic control unit, airbag cover and support ring, airbag, or airbag module. If the airbag indicator light continues to flash or remains steadily lit after the vehicle is started for 6 to 8 seconds, or flashes for 5 seconds and then stays lit while the vehicle is in operation, it indicates that there may be a fault with the airbag. If road conditions permit, you can find a safe place to temporarily park when the airbag light is on, turn off the engine, disconnect the negative terminal of the power supply, wait for 5 to 10 minutes, then reconnect it, restart the engine to complete the vehicle self-check, and then check whether the indicator light on the dashboard is still lit. If the airbag indicator light disappears, you can continue driving; otherwise, you should call for rescue assistance.
109
Share

What Are the Causes of Abnormal Noise in the Engine Transmission?

Engine transmission abnormal noise is caused by: 1. Wear and damage of bearings; 2. Abnormal gear meshing clearance; 3. Gear tooth surface metal peeling, tooth breakage, or misalignment during assembly; 4. Insufficient lubrication due to lack of lubricating oil; 5. Water ingress into the transmission; 6. Loose bolts on the transmission housing; 7. Loose fit between the gearshift lever and the shift fork groove in manual transmissions; 8. Long-term lack of automatic transmission fluid replacement; 9. Use of inferior automatic transmission fluid. Transmissions are divided into manual transmissions and automatic transmissions. Manual transmissions mainly consist of gears and shafts, while automatic transmissions are composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system.
114
Share

What Causes the Unpleasant Smell When Turning on the Car Air Conditioner?

Car air conditioner emits unpleasant smell when turned on due to: 1. For new cars, the reason is: During assembly, adhesives and other chemical agents are used on components like the evaporator, which release odors through the air ducts, polluting the cabin air; 2. For older cars, the reason is: Residual moisture in the air conditioning system pipes combines with dust from the air, leading to mold growth. The car air conditioner adjusts and controls the temperature, humidity, air cleanliness, and airflow within the car cabin to a comfortable state, providing a pleasant environment for passengers, reducing travel fatigue, creating good working conditions for the driver, and serving as a crucial ventilation device for safe driving.
112
Share

Is it necessary to install an engine guard plate for the car?

It is necessary to install an engine guard plate for the car. The engine guard plate is designed to protect the bottom of the engine, aiming to prevent damage from bottoming out, mud, and stones. Many car models now come with plastic guard plates installed at the bottom of the engine from the factory. However, these plates are not only low in strength but also do not fully cover the engine. This design is partly due to cost considerations, but mainly for safety reasons. During a car collision, a metal guard plate can interfere with the engine's downward movement, potentially causing the engine to enter the cabin and leading to unpredictable consequences for the driver. Besides affecting safety and reducing ground clearance, a metal guard plate may also cause engine resonance and abnormal noises.
112
Share

Where to Add Windshield Washer Fluid in the Octavia?

The windshield washer fluid in the Octavia is added to the windshield washer fluid reservoir located in the engine compartment. The cap of the windshield washer fluid reservoir is blue, smaller than the expansion tank cap, and features a windshield washer symbol. After opening the car's hood, you can locate the reservoir and add the fluid by removing the cap. Taking the 2020 Octavia as an example, it belongs to the compact car category with body dimensions of 4675mm in length, 1814mm in width, 1460mm in height, and a wheelbase of 2686mm. The 2020 Octavia is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113ps, a maximum power of 83kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.