How to Adjust the Clock on Chery Tiggo 3?

[LaBella]

To adjust the clock on the Chery Tiggo 3, follow these steps: 1. Turn off the ignition switch and set the headlight switch to the first position. 2. Press and hold the adjustment button until the hour field flashes, then release it. Adjust the hour by pressing the adjustment lever. 3. After setting the hour, the display will automatically switch to minute adjustment. Adjust the minutes by pressing the adjustment lever. Taking the 2020 Chery Tiggo 3 as an example, it is a compact SUV with the following dimensions: length 4420mm, width 1760mm, height 1670mm, wheelbase 2510mm, minimum ground clearance 190mm, and curb weight 1358kg.

[LeoAnn]

I've been driving my Chery Tiggo 3 for over three years and have adjusted the clock several times. Just look at the small button on the left side of the dashboard, press and hold it for about three seconds, and the hour digits will start flashing. At this point, short presses will adjust the hour. Then press and hold again to switch to minute adjustment, where short presses will adjust the minutes. Once set, press and hold again to save the settings. If the battery is disconnected and the time resets to zero, you'll need to set it again this way. Newer models with touchscreens can adjust it in the system settings, but my older model only has mechanical buttons. Remember, it's safest to do this in a parking lot—adjusting while driving can be distracting and dangerous. Sometimes the dashboard buttons might stick, but just press them a few more times; no need to specifically repair them.

[Molly]

I didn't know how to adjust the time before, but later I consulted an experienced technician at the 4S dealership. He said that the Tiggo 3's clock adjustment relies entirely on the round button on the left side of the instrument panel: press and hold it until the hour digits flash, then press briefly to increase the hour; press and hold again to switch to minute adjustment, and press briefly to adjust the minutes; finally, press and hold to save. The whole process doesn't require touching any steering wheel buttons. If the central console has a large screen, you can also adjust the time by tapping the settings icon and entering the time options. The first time you do it, you might feel a bit flustered, so it's recommended to try it slowly when the engine is off. If the battery runs low, the clock will reset, and you'll have to set the time again. Be careful not to press the button too hard during operation, as it can easily damage the contacts.

[StRicardo]

Adjusting the Tiggo 3 clock is actually a five-step process. Step 1: Locate the adjustment button on the left side of the instrument panel, usually marked with SET or a clock symbol. Step 2: Press and hold the button until the hour digits flash. Step 3: Press the button briefly to adjust the hour. Step 4: Press and hold again to switch to minute adjustment, then press briefly to set the minutes. Step 5: Press and hold to save the settings. In newer models, you can also operate via the central control screen settings menu under Settings-System-Time Adjustment. Note: It's safer to operate when the vehicle is turned off, as operating while driving may trigger alarms. Buttons that aren't adjusted for long periods tend to accumulate dust; using a cotton swab to clean before pressing can improve responsiveness. Unstable battery voltage can also affect the accuracy of the clock.

[GabriellaLee]

I just helped my sister adjust the clock on her Tiggo 3 last week. For girls operating this, remember three steps: First, press and hold the small button on the left side of the dashboard, release when the time digits start flashing; then, tap to adjust the hour, press and hold to switch to minutes after setting; finally, tap to adjust the minutes and press and hold to save. The whole process is as simple as playing with a phone. For models with a central control screen, it's even more intuitive—just tap the screen to set the time. It's recommended to check the time accuracy monthly, especially after long trips. It's best to operate with the overhead light on for illumination, as it's easy to press the wrong button in the dark at night. Make sure the steering wheel doesn’t block the button position, and operating from the side is more convenient.

[BentleyFitz]

Here's a pro tip for adjusting the clock on your Tiggo 3: it depends on the model year. For pre-2015 models, use the button on the left side of the instrument panel—long press to switch modes, short press to adjust time. Newer models with infotainment systems have a more intuitive time setting option in the system settings. The core operation remains the same: long press to enter blinking mode, short press to increase/decrease values. The instrument panel button is positioned slightly above and behind the steering wheel, easily reachable with your right hand. If the time suddenly resets to zero, it's likely due to a battery disconnect—just reset it. While frequent adjustments aren't necessary, it's wise to calibrate before long trips to avoid schedule mishaps. Older buttons may respond slower with age; pressing firmly usually solves this.