How to activate the windshield washer on the Changan CS75?

[EverlyDella]

To activate the windshield washer on the Changan CS75, gently push the wiper lever. The Changan CS75 is a compact SUV produced by Changan Automobile, with body dimensions of 4650 mm in length, 1850 mm in width, and 1715 mm in height. It has a wheelbase of 2700 mm, a fuel tank capacity of 58 liters, and a luggage compartment capacity ranging from 520 to 1490 liters. The Changan CS75 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 131 kW and a maximum torque of 265 Nm, with the maximum power achieved at 5500 rpm. It is paired with a 6-speed manual transmission.

[DelBeckett]

As a long-term owner of the Changan CS75, operating the windshield washer function is quite intuitive. Sitting in the driver's seat, first start the engine, then locate the wiper control stalk on the right side of the steering wheel—it's integrated into the steering column. Gently pull this stalk toward yourself to activate the washer jets, which spray cleaning fluid onto the windshield. The wipers will automatically swipe a few times to complete the cleaning process. If you notice weak or no spray, it's likely the washer fluid is empty. In this case, I pop the hood to check the washer fluid reservoir, usually located near the coolant tank, and refill it with dedicated windshield washer fluid. Remember to use antifreeze washer fluid in winter to prevent the spray nozzles from freezing and clogging. Occasionally, the nozzle holes may get blocked by dust—I gently clear them with a fine needle to restore normal function. While this feature is convenient while driving, avoid overusing it to prevent distraction and ensure safety.

[Allen]

I recently got my hands on a Changan CS75 and found the windshield washer operation to be quite simple. After starting the car, just gently pull the wiper control stalk on the right side of the steering wheel toward yourself with your right hand—a quick tug will do. You'll immediately hear the spraying sound as the washer fluid hits the windshield, followed by the wipers automatically sweeping a few times to clean it off. The whole process is quick and straightforward. If the spray is misaligned or weak, I check if the nozzles are off-position and can gently adjust them with a small screwdriver to aim properly at the glass. Also, don't forget to top up the washer fluid regularly—just pop the hood and locate the washer fluid reservoir to refill. A few quick sprays while driving in the rain keep the windshield clear for better visibility. New drivers will get the hang of it quickly with this car, so no need to worry too much.

[Petunia]

As an ordinary car owner who pays attention to vehicle maintenance, using the windshield washer on the Changan CS75 is a basic operation. After starting the car, gently pull the wiper lever on the right side of the steering wheel toward yourself to activate the washer immediately. The key is to ensure the cleaning system works properly: I regularly check if the washer nozzles are clogged and use a needle to clear any debris; the washer fluid reservoir should be topped up in time. If no water sprays out, first check the fluid level or try changing the type of washer fluid. Routine maintenance like this can help prevent issues.

[JuliannaLynn]

Driving the Changan CS75 on the road, the windshield washer function is very practical while driving. Simply pull the wiper lever next to the steering wheel, and the washer will activate. Gently operating it while driving can quickly clean the windshield, improving visibility and safety. If the washer malfunctions, I stop to check the fluid level or adjust the nozzle angle. Be careful not to operate it repeatedly while driving to avoid distraction.

[McJuliana]

After using the Changan CS75 for a while, the windshield washer operation is very user-friendly. After starting the engine and getting in the car, gently pull the control lever on the right side of the steering wheel toward yourself with your right hand, and the cleaning fluid sprays out while the wipers automatically wipe the glass dry. If you notice the spray isn't smooth, try adding new windshield washer fluid or check the nozzle position—I gently adjusted it by hand to ensure proper alignment. Occasionally using this feature while driving helps maintain clear visibility.