···
Log in / Register

How Often Should a Fuel Pump Be Replaced?

1Answers
AndrewAnn
07/29/2025, 04:14:11 PM

A fuel pump should be replaced every 100,000 kilometers, but the fuel filter can be replaced around 40,000 kilometers. When inspecting and maintaining the car's fuel pump, it is necessary to go to a professional 4S shop to avoid problems during the disassembly process, which could lead to more significant failures and unnecessary losses. The car fuel pump is a lightweight and compact pump, divided into three main categories: inline, distributor, and unit pumps. The fuel pump requires a power source to operate, and its lower camshaft is driven by the engine crankshaft gear. When selecting a fuel pump, five aspects should be considered based on the process flow and system requirements: liquid properties, liquid delivery volume, device pressure, pipeline layout, and operating conditions.

Was this review help?
115
Share
More Q&A

When is the Best Time to Wax a Car?

Generally, new cars do not require waxing within the first five months after purchase. If the daily driving time is not long, waxing every 3-4 months is sufficient. Below are the benefits of waxing: 1. Waterproofing; Cars are often exposed to the elements, enduring wind and rain. When water droplets remain on the car's surface, under strong sunlight after the weather clears, each droplet acts like a convex lens, focusing light to create temperatures of 800~1000°C at the focal point, causing dark spots on the paint and significantly affecting the paint's quality and lifespan. Additionally, water droplets can easily cause rust on exposed metal surfaces. High-quality car wax can reduce water droplet adhesion by over 90%, greatly minimizing the risk of corrosion and maximizing paint protection. 2. Heat Resistance; The principle behind car wax's heat resistance is its ability to effectively reflect incoming light from various angles, preventing the paint or base coat from aging or discoloring due to light exposure. 3. UV Protection; The UV protection feature of car wax works in tandem with its heat resistance. Due to the properties of ultraviolet light in sunlight, UV rays are more prone to refracting into the paint surface. UV-protective car wax takes full account of these properties, minimizing the damage caused by UV rays to the car's surface.
105
Share

What brand of transmission does the Atenza use?

The Atenza is equipped with the Skyactiv-Drive 6-speed automatic transmission. One of the highlights of the Atenza is the application of Mazda's Skyactiv technology. The Skyactiv engine in the Atenza features a high compression ratio of 13:1, improving fuel efficiency and torque by 15%. The Atenza is Mazda's new generation flagship mid-to-high-end sports sedan, inheriting the design of the imported Mazda ATENZA. It is equipped with high-performance MacPherson strut front suspension and multi-link independent rear suspension. In terms of body dimensions, the Atenza measures 4870mm in length, 1840mm in width, and 1450mm in height.
109
Share

What is the wiring method for daytime running lights?

The wiring method for daytime running lights is as follows: 1. Locate the ACC position in the car, usually found on the left side at the bottom of the steering wheel; 2. Secure the daytime running lights in the appropriate position, then proceed with wiring; 3. Connect the black wire to ground or the negative terminal of the battery, the red wire to the ACC relay, the two white wires to the headlight fuse, and the two yellow wires (or one yellow and one green) to the positive terminal of the turn signal; 4. After installing the wiring harness, recheck for any loose connections. Daytime running lights are designed to make the vehicle more visible to others during the day and are installed on both sides of the front end. Their purpose is not to help the driver see the road better but to alert others that a vehicle is approaching.
116
Share

What does h stand for in tires?

The h in tires represents the maximum speed the tire can withstand. Tires are one of the important components of a car, and their main functions are: 1. Supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; 2. Preventing severe vibrations and early damage to car components, adapting to the high-speed performance of the vehicle and reducing noise during driving, ensuring driving safety; 3. Transmitting traction and braking torque, ensuring good adhesion between the wheel and the road surface to improve the car's power, braking, and passability, and working with the car suspension to mitigate the impact during driving and dampen the resulting vibrations.
110
Share

Which province does the license plate code Lu P belong to?

Lu P is the license plate code for Liaocheng City in Shandong Province. Other cities in Shandong Province have the following license plate codes: Lu A for Jinan, Lu B for Qingdao, Lu C for Zibo, Lu D for Zaozhuang, Lu E for Dongying, Lu F for Yantai, Lu G for Weifang, Lu H for Jining, Lu J for Tai'an, Lu K for Weihai, Lu L for Rizhao, Lu M for Binzhou, Lu N for Dezhou, Lu P for Liaocheng, Lu Q for Linyi, and Lu S for Heze. Liaocheng City is located in the western part of Shandong Province, bordering Handan City and Xingtai City in Hebei Province across the Zhangwei River to the west, neighboring Henan Province across the Jinwei River to the south, adjacent to Jining City, Tai'an City, and Jinan City across the Yellow River to the southeast, and bordering Dezhou City to the north and east.
117
Share

What is the warranty period for a car transmission?

Car transmissions typically come with a three-year warranty. The transmission primarily refers to the gearbox of a vehicle, which is divided into manual and automatic types. A manual transmission mainly consists of gears and shafts, achieving speed and torque variation through different gear combinations. An automatic transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque variation through hydraulic power transmission and gear combinations. The transmission is a crucial component of a vehicle, capable of altering the gear ratio and expanding the driving wheel's torque and speed. With advancements in modern technology, transmissions have undergone upgrades, evolving from manual transmissions to continuously variable transmissions (CVT) and from non-synchronized to synchronized versions, making operation more convenient.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.