···
Log in / Register

How much does the BYD e2 weigh?

6Answers
OReese
07/29/2025, 03:13:14 PM

The curb weight of the BYD e2 is only 1250kg. The BYD e2 was officially unveiled at the 2019 Shanghai Auto Show as a "new intelligent pure electric crossover" in the e-series, built on BYD's all-new e-platform. The e2 features a fashionable design concept inspired by the starry sky, equipped with core three-electric technology, stylish design, and intelligent technological configurations. Here are specific details about BYD: 1. Logo Meaning: In 2007, BYD Auto replaced its old logo of blue sky and white clouds with a new one consisting of three letters and an ellipse. BYD stands for "Build Your Dreams," meaning to achieve dreams. 2. Development Prospects: BYD is one of the most steadfast companies in the Chinese automotive industry, or even the global automotive industry, in adhering to the new energy vehicle development strategy. China's new energy vehicle strategy has experienced ups and downs, with various discussions on its strategic direction. However, BYD has remained unwavering, consistently making new energy vehicles its strategic focus.

Was this review help?
112
Share
Ria
08/14/2025, 09:35:19 AM

I've been driving an electric car for several years. The BYD e2 weighs around 1,350 kg, with minor variations depending on the configuration. This weight is quite moderate among electric compact cars. With the battery pack placed under the chassis, the center of gravity is stable, offering good handling and strong acceleration with noticeable push-back sensation. However, the heavier weight also affects range—highway driving consumes more electricity due to wind resistance, while city driving can achieve around 400 km. To improve efficiency, regular tire maintenance and reducing weight on non-essential components can save power and extend battery life. Electric car weight is a double-edged sword: lighter cars save power but may compromise structural stability, while heavier cars offer safety at the cost of higher energy consumption. I recommend test-driving to assess handling and choose based on your daily commute distance.

Was this review help?
11
Share
Expand All
DelEmerson
10/14/2025, 11:56:37 PM

As a family car, the e2 weighs around 1,350 kilograms, offering a solid body feel with minimal shaking on bumpy roads. The added weight enhances stability, providing a more reassuring ride for elderly passengers and children, though steering response is slightly slower when navigating tight turns in urban areas—fortunately, the electric power steering adjusts flexibly. Charging times are somewhat lengthy, but BYD's efficient battery management system makes daily use worry-free. The vehicle's heft can make parking space hunting challenging; installing a rearview camera is recommended. On related notes, the weight impacts overall energy consumption—opting for low rolling resistance tires can save some electricity, contributing to lower long-term maintenance costs.

Was this review help?
9
Share
Expand All
LaTimothy
11/27/2025, 11:48:21 PM

I have ten years of driving experience. Weight is related to safety. The e2 weighs around 1,350 kg, and with its low center of gravity design, it's less prone to roll over when turning and offers good protection in collisions. The battery is heavy but has a rigid structure, reducing accident risks. It's recommended to regularly check the suspension and shock absorbers to prevent loss of control due to fatigue driving. Weight also affects comfort; heavier vehicles provide better vibration filtration and stability, making long-distance driving less tiring, and electric vehicles offer excellent noise insulation.

Was this review help?
3
Share
Expand All
DiGabrielle
01/18/2026, 01:10:11 AM

I'm passionate about green mobility. The e2 weighs around 1,350 kg, utilizing lightweight materials to reduce weight and energy consumption, offering strong range with low electricity usage, which is a plus for eco-friendliness. Although slightly heavier, its efficient design and energy-saving motor help reduce carbon emissions. It drives smoothly, with noticeable energy savings during urban stop-and-go traffic.

Was this review help?
6
Share
Expand All
LaIsaac
04/14/2026, 02:45:37 AM

When considering car weight during purchase, the e2 weighs around 1350kg, with a sturdy body suitable for family use and fewer maintenance hassles. Heavier weight slightly reduces range, but opting for the high-end battery version compensates. It offers stable handling, greater confidence at high speeds, and good comfort on bumpy roads. It's advisable to choose based on road conditions, test drive multiple options, and compare prices.

Was this review help?
7
Share
Expand All
More Q&A

Where is the OBD port located on a Focus?

The OBD port on a Focus is located inside the vehicle's fuse box, which is situated in the engine compartment. Here are the details about the Focus OBD port: 1. First, open the vehicle's hood, then locate and open the fuse box. You will see a 16-pin connector - this is the diagnostic port. 2. OBD, which stands for On-Board Diagnostics in Chinese, is an extended detection system for vehicle fault diagnosis that can examine and diagnose car problems. 3. Simply put, it connects to the OBD diagnostic network through this port, allowing technicians to inspect and repair the vehicle using diagnostic equipment.
114
Share

Do New Tires Require a Wheel Alignment?

As long as the vehicle does not show signs of uneven tire wear, a wheel alignment is not necessary. Below is an introduction to the relevant knowledge about wheel alignment: 1. Definition: Wheel alignment is based on the four-wheel parameters of the vehicle, adjusted to ensure good driving performance and a certain level of reliability. Front wheel alignment includes four aspects: caster angle, kingpin inclination angle, camber angle, and toe-in. Rear wheel alignment includes camber angle and individual rear wheel toe-in. Collectively, front and rear wheel alignment is referred to as four-wheel alignment. 2. Function: It helps the car maintain stable straight-line driving and easy steering, while reducing wear on the tires and steering components during driving.
102
Share

What oil should be used for the front and rear differentials of a 2017 Patrol?

Go to a 4S dealership to add specialized gear oil. The following are the reasons for differential bearing humming: 1. Differential oil: Differential oil has a service life. When it reaches a certain mileage, it must be replaced. Otherwise, the lubrication effect of the oil will sharply decline, causing abnormal noise in the differential. In this case, simply replacing the oil will suffice. 2. Differential gears: When the wear on the gears is severe, it becomes difficult for them to match with other internal components. Naturally, the differential will produce a humming sound during operation, and a new gear must be installed to resolve the issue. If the spacing between the gears is not properly adjusted, it can also cause abnormal noise in the differential, requiring readjustment.
116
Share

Can Automatic Transmission Cars Be Put in Neutral Gear?

Automatic transmission cars should not be put in neutral gear. The following are the hazards of shifting to neutral: 1. Damage to the Transmission: Automatic transmission cars are typically designed with computer-controlled gear shifting or automatic fuel supply/cutoff systems, unlike manual transmission vehicles. Coasting in neutral does not achieve fuel savings. Moreover, the design of automatic transmissions differs from manual transmissions, and prolonged coasting in neutral can damage the transmission. 2. Damage to Friction Plates: When coasting in neutral (N gear), the difference between the vehicle's speed and the engine's RPM can lead to insufficient oil pressure in the hydraulic lines of the automatic transmission. This not only increases friction and reduces lubrication effectiveness but also damages the friction plates inside the automatic transmission.
117
Share

What are the differences between Chaoyang tires RP26 and RP76?

Chaoyang tires RP26 and RP76 have the following differences: 1. Chaoyang RP26: It adopts a special formula and tread design, providing excellent wet grip and outstanding traction, effectively breaking through water films to enhance wet road safety. The asymmetric tread design features outer tread patterns for efficient water drainage, ensuring wet performance, while the large inner tread shoulder blocks reduce tread block squirm, improving dry performance. 2. Chaoyang RP76: The comfort mainly lies in the tire's tread design, which uses an asymmetric pattern. The solid center rib pattern combined with high-rigidity shoulder tread blocks ensures straight-line and steering stability while significantly enhancing driving quality.
102
Share

What is the difference between a panoramic sunroof and an electric sunroof?

Panoramic sunroofs are larger in area than electric sunroofs, covering two-thirds of the roof. Here is some relevant information about the two: 1. Panoramic sunroofs have some minor issues: when driving on rough roads, strange noises can be heard, and during rainy days, water may leak into the car. 2. Electric sunroofs are relatively low-cost: the installation price of panoramic sunroofs is higher, while electric ones are cheaper. 3. The maintenance cost of panoramic sunroofs is relatively expensive: due to their high quality, the maintenance cost is also relatively higher.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.