···
Log in / Register

How much does the 2018 Lavida 1.4t weigh?

6Answers
Kyle
09/06/2025, 03:44:34 AM

2018 Lavida 1.4t weighs 1.3 tons. It is built on Volkswagen's MQB platform and has undergone comprehensive upgrades compared to the 2017 Lavida model, hence officially named Lavida PLUS by Volkswagen. In terms of body dimensions, the 2018 Lavida measures 4670mm in length, 1806mm in width, 1474mm in height, with a wheelbase of 2688mm. Exterior-wise, the 2018 Lavida adopts Volkswagen's new family design language, featuring chrome trim connecting the sharp headlight clusters and incorporating a flat design concept to enhance its stylish appeal.

Was this review help?
104
Share
DelLola
09/18/2025, 03:23:17 AM

I've driven the 2018 Lavida 1.4T quite a few times, with a curb weight around 1,290 kg. The car feels solid on the road, especially in city traffic where the fuel consumption at startup tends to be higher, averaging just over 7 liters. However, it's very stable on the highway—the heavier body reduces wind resistance impact, bringing fuel consumption down to 5-6 liters, and the steering feels planted without any floatiness. For daily commuting, it comfortably seats four adults, and even with the trunk loaded with cargo, it gives a robust and durable impression. On occasional long family trips with the car fully packed, the weight distribution is well-balanced, maintaining stability during turns. That said, parking requires extra caution—the weight increases inertia, resulting in slightly longer braking distances, so beginners might need some time to adjust. Overall, while it's not the lightest, its well-rounded performance makes it quite family-friendly.

Was this review help?
14
Share
Expand All
AlanaLee
11/01/2025, 03:48:37 AM

As an experienced driver, I know the Lavida 1.4T weighs around 1,290 kg, which makes it quite interesting in terms of handling. The turbocharged engine paired with this weight means the initial acceleration is slightly slower, but the mid-to-late stage burst is strong, making overtaking thrilling. Compared to the lightweight versions of Japanese cars in the same class, the Lavida is a few dozen kilograms heavier, but it feels more stable during high-speed cruising without any floating sensation. I've tested it on mountain roads, and the body weight enhances grip, with the chassis tuned for stability and a relatively small turning radius. The weight also affects fuel efficiency—over time, I've noticed that more load leads to higher fuel consumption, so it's essential to keep unnecessary items in the car under control. In terms of safety, the extra weight provides additional cushioning, offering better protection in accidents, but don’t forget to regularly check the tires and suspension to ensure wear-prone components aren’t compromised.

Was this review help?
11
Share
Expand All
DeCamilla
12/15/2025, 02:56:37 AM

The Lavida 1.4T weighs around 1,290 kg, with safety being a key focus. A heavier vehicle remains more stable during collisions, reducing the likelihood of body deformation. Once, I skidded in the rain and lightly hit a guardrail—the weight played a crucial role, and I walked away unharmed. Weight affects fuel consumption; in city driving, it averages about 7 liters per 100 km. To save fuel, avoid full loads and sudden acceleration. Handling is decent for light turns, but at high speeds, body inertia becomes noticeable during sharp turns, so it's advisable to slow down. The car's weight is suitable for daily use, but avoid excessive modifications as they can add even more weight.

Was this review help?
19
Share
Expand All
QuinnAnn
02/04/2026, 03:48:59 AM

The 2018 Lavida 1.4T weighs approximately 1,290 kg, which significantly impacts fuel consumption for budget-conscious drivers. During city commutes with one passenger, the average fuel consumption is 7-8 liters. The heavier weight results in slower acceleration and higher fuel usage, but on highways, it can drop to 6 liters, saving some money. The weight provides better stability, but it also leads to faster brake wear. Check tire pressure monthly to extend tire life. Maintenance is slightly more burdensome due to the heavier components; when changing oil, focus on weight reduction to optimize fuel efficiency. Compared to lighter models, it is more durable but comes with slightly higher costs. Regularly cleaning out the trunk to reduce weight is recommended for saving money.

Was this review help?
5
Share
Expand All
LeAngelina
04/30/2026, 01:09:53 PM

I've been driving the Lavida for several years, and its weight of 1290 kg has a noticeable impact. In terms of handling, it remains stable during high-speed cornering with minimal body roll, but fuel consumption increases to 8 liters when carrying heavy loads. The heavier weight puts more strain on the brakes, requiring more frequent brake pad replacements. Uneven tire wear necessitates regular rotation and maintenance. Adding a roof box for modifications increases weight, while the original weight ensures safety and reliability, providing good protection in accidents. Keeping the load light during long-term driving is safer and more fuel-efficient.

Was this review help?
14
Share
Expand All
More Q&A

What Are the Causes of Incomplete Clutch Disengagement?

Clutch disengagement issues: Excessive free travel of the clutch pedal, bent or deformed release levers, oil leakage in the clutch hydraulic control mechanism. Excessive free travel of the clutch pedal: When the free travel is too large, the movement of the release bearing pushing the release lever forward is reduced, consequently shortening the rearward movement of the pressure plate, leading to incomplete clutch disengagement. Solution: Inspect the free travel of the clutch pedal and adjust it if excessive. Bent or deformed release levers: Bent or deformed release levers, loose supports, worn-through pivot pin holes, dislodged pivot pins, or uneven contact surfaces between the release levers and the release bearing. Solution: Immediately seek professional repair services to inspect and replace the release levers as needed. Oil leakage in the clutch hydraulic control mechanism: Leakage, air presence, or insufficient oil in the hydraulic control mechanism. Symptoms include difficulty in shifting gears even when the clutch pedal is fully depressed, or the vehicle moving forward without releasing the pedal, causing the engine to stall. This indicates incomplete clutch disengagement. Solution: For hydraulic control mechanisms, check if the fluid reservoir has insufficient oil or if there is air in the lines, and perform necessary purging.
101
Share

Do I Need to Press the Brake When Shifting Gears During Reverse Parking?

It is best to keep the brake pressed at all times. If you can ensure that the test vehicle does not roll in the garage, you may not need to press the brake. When shifting gears, the vehicle is required to be in a stopped state. If the vehicle rolls, it may be judged as a failure. Below are specific tips for reverse parking: 1. Identify the starting point: Take right reverse parking as an example. The distance between the car and the left line at the starting position should be 1.2-1.8 meters, the steering wheel should be straight, and the body should be parallel to the left line. When reversing, use the bottom edge of the left rearview mirror as a reference. When the two coincide, turn the steering wheel fully to the right and continue reversing. 2. Control the corner point: Look at the right rearview mirror. When you spot the garage corner point, pay attention to the changing distance between the corner point and the car body. When the distance is less than 30 cm, turn the steering wheel back halfway and continue reversing. Once the car body enters the garage and is parallel to the garage line, turn the steering wheel back one full turn. If the distance is not less than 30 cm, do not turn the steering wheel back. Keep reversing until the car body is parallel to the garage line, then turn the steering wheel back one and a half turns at once. 3. Align the stopping point: The stopping point is the parking spot after entering the garage. The reference method is the same as for the starting point. When you see the bottom edge of the left mirror coincide with the garage's shoulder line, stop the car.
104
Share

Where is the rearview mirror heating switch on the 10th-generation Civic?

Three curved upward arrows paired with a rectangle represent the rearview mirror heating button icon. 1. Vehicle model restrictions: Although rearview mirror heating is practical, it is restricted on some models. For example, the rearview mirror heating function only operates when the ambient temperature is below 15 degrees Celsius. 2. Power consumption: Note that rearview mirror heating consumes a significant amount of power. Therefore, when using the rearview mirror heating function, ensure the vehicle is in the running state and avoid using this function when the engine is cold. If the battery is low on charge or malfunctioning, the rearview mirror heating may not activate.
118
Share

What Level of Officials Are Eligible for the Hongqi L5?

Hongqi L5 is primarily designated for officials at the level of the President of the country, serving as a dedicated vehicle for receiving foreign guests. Below is a detailed introduction about the Hongqi L5: 1. Overview: The Hongqi L5 is a Class E sedan with 100% independent intellectual property rights, developed and prepared for production by FAW (China First Automobile Works) after the success of the Hongqi-branded parade vehicle project in 2009. 2. Other Features: The design of the Hongqi L5 continues the classic styling of the Hongqi CA770, incorporating many traditional elements. The front face of the Hongqi L5 is inspired by the CA7600J parade vehicle from the 2009 National Day celebration, featuring a dignified and elegant appearance. The round headlights and the streamlined front-mounted Hongqi emblem are iconic design elements of the Hongqi brand.
118
Share

What Happens When Rear Wheels Lock Up?

When the rear wheels lock up during braking, it may cause the vehicle to skid or fishtail, while front wheel lock-up can result in a loss of steering control. During driving, wheel lock-up may occur due to braking, where the braking torque causes the wheels to stop rotating and slide on the road surface—essentially, the tires stop turning, and the car slides like a brick on the road. Wheel lock-up results in pure sliding friction between the tires and the road. Front wheel lock-up leads to steering failure, preventing the vehicle from moving in the intended direction and instead causing it to drift toward the path of least resistance. Rear wheel lock-up, on the other hand, can induce what is commonly known as drifting. Since locked wheels lose the ability to resist lateral forces, the vehicle may experience skidding or loss of control. When wheels lock up, the driver should release the brake pedal. Vehicles equipped with an ABS (Anti-lock Braking System) can effectively prevent this situation. Tire lock-up refers to the sudden and complete stopping of the wheels when braking, causing the vehicle to lose steering capability. This typically occurs in vehicles without ABS. Wheel lock-up happens due to excessive braking force from the brake pads, discs, or drums. However, because of the vehicle's momentum, it continues moving forward with the tires sliding rather than rolling, making it impossible to change direction and potentially leading to accidents.
119
Share

Where is Leapmotor produced?

Leapmotor is an automobile under Zhejiang Leapmotor Technology Co., Ltd. The manufacturer of Leapmotor new energy vehicles is Leapmotor Co., Ltd. Leapmotor is an innovative intelligent electric vehicle brand, jointly invested by Zhejiang Dahua Technology Co., Ltd. and its major founders. The brand was established in 2015, with its headquarters located in Binjiang High-Tech Development Zone, Hangzhou, Zhejiang. Its business scope covers intelligent electric vehicle design, R&D and manufacturing, intelligent driving, motor and electronic control, battery system development, as well as cloud-based vehicle networking solutions. The Leapmotor intelligent connectivity system consists of an intelligent vehicle unit, mobile app, voice recognition, and cloud system, achieving interconnection between the vehicle, mobile devices, and the cloud to provide an interconnected experience of people, vehicles, and life. It enables various connectivity functions such as voice control, online radio, online music, WeChat, video sharing, remote control, energy management, scheduled charging, and scheduled air conditioning. Utilizing the BIG-TABLE efficient storage mode and multiple security measures, it offers consumers a convenient, technological, and safe driving experience.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.