How Much Antifreeze is Enough?

Does a six-year-old car in 2021 require an on-site inspection?

A six-year-old car requires an on-site inspection. Only after passing the inspection can the annual inspection compliance mark be obtained. Inspection of vehicle components: Check whether the engine, chassis, body, and their auxiliary equipment are clean, complete, and functional, whether the paint surface is uniform and aesthetically pleasing, whether the main assemblies have been replaced, and whether they match the initial inspection records. Inspection of vehicle functions: Verify whether the vehicle's braking performance, steering control, lighting, exhaust, and other safety features comply with the requirements of the "Technical Conditions for Safe Operation of Motor Vehicles." Check for vehicle modifications: Inspect whether the vehicle has been modified, altered, or transformed, whether the driving license, license plate, and all vehicle registration records match the actual condition of the vehicle, whether there have been any changes, and whether the necessary approval and modification procedures have been completed.

102

Share

What are the consequences of starting a car directly in third gear?

Starting a car in third gear is theoretically possible, but the likelihood of stalling is quite high, making it practically very difficult. Essentially, only drivers unfamiliar with cars would attempt to start in third gear, as starting requires more precise coordination between the clutch, throttle, and brake. Often, the car stalls before the clutch even reaches the semi-engagement point. Additional information: Starting a manual transmission car in third gear causes significant wear on the clutch plates. The semi-engagement phase lasts longer, and the semi-clutch point is harder to find. Starting in third gear can easily lead to lugging, which is highly detrimental and should be avoided. During startup, the engine's RPM drops suddenly, causing the engine to sputter and nearly stall—a severe lugging condition that is very harmful to the engine.

114

Share

What Causes the Car Fan to Keep Running After the Air Conditioner is Turned Off?

Check if the electric fan is functioning properly. Normally, the electric fan has two speed settings: low speed and high speed. The high-speed setting activates when the air conditioning pressure is too high or when the engine coolant temperature reaches 103 degrees Celsius. Inside the car, there is also a button labeled 'C', which is the recirculation button. This button can block the airflow between the inside and outside of the car. Especially in summer, turning on the recirculation mode can significantly enhance the cooling effect. Additional Information: This feature is typically used right after turning on the air conditioning to help the car interior reach the desired temperature quickly. However, prolonged use of recirculation without air exchange may lead to dizziness, chest tightness, or other symptoms of oxygen deficiency among passengers. Therefore, it is advisable to turn off the recirculation function after some time to allow fresh air to circulate before turning it back on.

114

Share

Is it okay if water reaches half of the car tire?

If water reaches half of the car tire and the vehicle is stationary and not in motion, there is no issue with the vehicle itself. However, it is important to observe whether the water level is rising. If you must leave the waterlogged area, always check before opening the car door to ensure the water has not reached the height of the car's threshold, thereby preventing water from entering the interior. Below is additional information regarding water reaching the tires: 1. Do not continue driving: If water reaches half of the car tire, it is generally advised not to continue driving. If driving is necessary, always choose a route with shallow water. During the drive, carefully assess the water's depth, flow rate, and the nature of the waterbed, as well as the width of the entry and exit points and road conditions, to determine if it is safe to proceed. 2. When confirming whether your vehicle's structure can pass through: Generally, choose the shortest distance, shallowest water level, slowest flow, and firmest waterbed. Avoid revving the engine or accelerating abruptly to prevent water from splashing into the engine and causing it to stall; maintain steady acceleration while crossing the water, avoid stopping midway, and try to avoid shifting gears or making sharp turns. If the engine stalls, remember not to restart the vehicle.

103

Share

What is the rearcooler switch in a car?

The rearcooler in a car is the rear window defogger switch. When this switch is pressed, the rear window defogger, the exterior rearview mirror defoggers, and the front wiper de-icing device will all activate simultaneously. The defoggers and de-icing device will automatically turn off after approximately 15 minutes. Below is more information about car defoggers: 1. Introduction: The car defogger is located on the center console. The car defogger switch controls the defogger, which is used to reduce moisture, fog, and frost on the front and rear windshields and exterior rearview mirrors to improve visibility. 2. The physical principle of cold air defogging in cars: After the liquid refrigerant absorbs heat from the cooled object in the evaporator, it vaporizes into low-temperature, low-pressure steam, which is then drawn into the compressor, compressed into high-temperature, high-pressure steam, and discharged into the condenser. 3. The physical principle of hot air defogging in cars: When gas containing mist flows through the defogger at a certain speed, due to the inertia of the gas, the droplets that aggregate from collisions with the wave plates are very large. The gravity caused by the droplets exceeds the combined force of the gas lift and the surface tension of the liquid, causing the droplets to separate from the surface of the wave plates.

109

Share

What Engine Displacement is Equivalent to 136 Horsepower?

It is unrelated to displacement but related to power output. 136 horsepower can be achieved with an engine under 1.6 liters. 136 horsepower equals 100 kilowatts. Theoretically, larger engine displacement generally produces greater horsepower. However, in reality, the relationship between the two is not strictly linear, as it depends on the design philosophy and approach of the automaker. Below is expanded information about horsepower: 1. Cylinder Displacement: The volume of space through which the piston moves from top dead center to bottom dead center is called cylinder displacement. If an engine has multiple cylinders, the sum of all cylinders' working volumes is called the engine displacement, typically measured in liters (L). Generally, larger displacement means the engine can convert more chemical energy from fuel into mechanical energy per unit time, resulting in higher vehicle power. 2. Horsepower (PS): Refers to the engine's maximum power output, representing the work done by the engine per unit time, and is one of the units for measuring power. 1 PS equals 0.7457 kW, and 1 kW equals 1.36 PS. When people talk about how much horsepower a car has, they are essentially referring to the car's power output. The greater a car's power, the higher its horsepower, and consequently, the faster its speed.

114

Share