···
Log in / Register

How Much Air Should Be Put in Car Tires?

1Answers
VanIsabella
07/29/2025, 05:18:57 AM

Tire inflation should adhere to the regulations and requirements of the international GBT29782008 standard: 1. Standard tires: 2.4 to 2.5 bar; 2. Reinforced tires: 2.8 to 2.9 bar; 3. The maximum tire pressure should not exceed 3.5 bar. It is recommended to use the tire pressure recommended by the car manufacturer as the standard. Each car model has a specified tire pressure set by the manufacturer, which is usually indicated on the driver's side door or in the vehicle manual. Tire pressure refers to the air pressure inside the tire, which is essentially the 'blood pressure' of the car. The level of tire pressure plays a crucial role in the performance and power of the vehicle.

Was this review help?
109
Share
More Q&A

What are the effects on the engine after it overheats?

Engine overheating mainly occurs due to issues in the engine cooling system. For example, malfunctions in components such as the water temperature sensor, radiator, water pump, or fan can lead to the "overheating" phenomenon. More detailed information is as follows: 1. Consequences of engine overheating: In mild cases, it can cause deformation of the cylinder head and cylinder gasket, while in severe cases, it can lead to deformation of internal engine parts or even engine failure. 2. Consequences of delayed action: If the excessive heat is not dissipated promptly and high-load driving continues, the strength of components like the piston, piston rings, and connecting rod can decrease, or they may even deform. The engine will no longer be able to handle normal loads, and the normal gaps between parts will be disrupted, preventing the formation of proper oil films. In mild cases, this can cause cylinder scuffing or bearing seizure, while in severe cases, it can result in complete engine damage or failure.
111
Share

Why does the car make a clicking sound when starting at low speed?

When the car makes a clicking sound while accelerating at low speeds, it may be coming from the transmission. For manual transmission models, the possible causes of the abnormal sound include incomplete clutch disengagement, the presence of gear debris causing collisions between gears, or damaged gears. For automatic transmission models, the issue might lie with the gear set, which requires immediate repair. The reasons for the clicking sound during low-speed starts are as follows: 1. Transmission oil operating in high-temperature and high-pressure environments can produce a lot of sludge and impurities: This thickens the transmission oil, reducing its fluidity and causing direct friction between components without a protective layer, thereby increasing mechanical wear and leading to abnormal sounds. 2. Transmission oil needs replacement: Automatic transmission oil is generally replaced every 2 years or 40,000 kilometers, while manual transmission oil is serviced every 3 years or over 60,000 kilometers. For repaired transmissions, it is strongly recommended to perform the first maintenance at 3,000 kilometers, followed by replacement every year or 20,000 kilometers.
114
Share

How to reattach a fallen interior rearview mirror?

You can use strong double-sided tape, specifically designed for rearview mirrors. Simply peel off the protective paper on both sides, but make sure to scrape off any residual adhesive from the mirror. Additional solutions include: 1. AB adhesive: This type of adhesive comes in two parts (A and B) that need to be mixed before use. However, some AB adhesives take longer to cure, requiring patience for full solidification. 2. UV adhesive: Also known as invisible glue, it bonds plastic and metal perfectly. Since car windshields are made of glass and rearview mirrors often have metal parts, UV adhesive can solve this issue effectively. 3. Suction cup rearview mirror: This type doesn't require adhesive; it attaches to the glass via suction cups, making it very practical and convenient.
110
Share

What is a rain visor?

Rain visor is an accessory for vehicles. Below is relevant information about rain visors: 1. Function: Rain visors are attached to the side mirrors with double-sided tape. During rainy weather, they effectively prevent rainwater from splashing or flowing onto the mirrors, ensuring drivers always have a clear view. 2. Benefits: The formal name for rain visors is 'sun and rain deflectors'. Their greatest advantage is allowing windows to be slightly lowered during rain without letting water drip inside. Additionally, they create a small gap between the window and roof, which also serves a ventilation purpose.
110
Share

What are the symptoms of a clogged car air conditioning dryer?

In the case of a clogged car air conditioning expansion valve, the gauge shows high pressure on the high side and low pressure on the low side; if the dryer is clogged, the gauge shows low pressure on both the high and low sides, with high temperature before the clog. A mnemonic for diagnosis: Low pressure high and high pressure low, replace the compressor; both pressures high, need to vent or there's a cooling issue; gauge fluctuating indicates moisture in the system, evacuation must be more thorough; both pressures low indicate a lack of refrigerant, otherwise there's a blockage in the system. The functions of the car dryer are as follows: 1. Storage function: It stores and supplies liquid refrigerant in the refrigeration system to compensate and regulate the surplus or shortage of liquid refrigerant when operating conditions change. Generally, when the air conditioning system starts, the load is large, requiring a high circulation of refrigerant. After operating for a while, the load decreases, and the required refrigerant quantity reduces accordingly. 2. Filtration function: Although all components in the refrigeration system should be strictly cleaned and dried before leaving the factory, dirt may be inadvertently introduced during installation, or contaminants like oxide scales may form in the pipes. The refrigerant itself may not be perfectly clean, and powder and wear debris from the compressor operation can also be present. The filter removes these mechanical impurities and dirt to ensure smooth refrigerant flow and prevent blockages that could affect normal operation. 3. Drying function: It absorbs moisture in the refrigerant. Moisture can come from inadequate drying of the refrigeration system, air ingress, or dissolved water in the refrigerant. The presence of moisture can cause "water blockage." In the air conditioning refrigeration system, the dryer filter's role is to absorb moisture in the system, block impurities to prevent them from passing through, and avoid ice and dirt blockages in the refrigeration system pipes.
104
Share

How many kilometers can the EC3 run?

EC3 is a small electric vehicle, absolutely sufficient for daily commuting, with a cruising range of approximately 245 kilometers. If it's not for ultra-long-distance commuting, maintaining this range for a week should not be a problem. After all, it's a small car, and the EC3's power recovery system can effectively recover 99.99% of braking energy. This will also enhance the range. Relevant information about the vehicle's range is as follows: 1. Introduction: The vehicle's range refers to the farthest distance that can be traveled with the remaining gasoline in the tank at a fuel-saving speed, mainly calculated by the vehicle's computer based on the current fuel consumption. 2. Influencing factors: The vehicle's range capability is affected by four factors: charging equipment, tire pressure, whether the vehicle overtakes, and whether it frequently stops and starts abruptly.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.