···
Log in / Register

How Many Years After a 10-Year Driver's License?

6Answers
TimothyLee
07/29/2025, 08:37:48 PM

After using a driver's license for ten years, it can be replaced with a long-term valid motor vehicle driver's license. Below is a brief introduction about driver's licenses: International Definition: Internationally, a driver's license is defined as 'a document issued by the competent authority permitting the holder to drive a motor vehicle.' The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal procedure that must be issued by a designated authority. Basic Information: The full name of a driver's license is 'motor vehicle driver's license,' also known as a 'driving license.' It is a certificate required by law for individuals who operate motor vehicles. Driving a motor vehicle requires certain driving skills, and those lacking such skills may cause traffic accidents if they drive recklessly. Generally, individuals cannot drive on public roads without a valid license.

Was this review help?
116
Share
Franklin
08/15/2025, 01:33:32 AM

I remember when I first got my driver's license, it was valid for six years. Later, when I renewed it, it became valid for ten years. If you haven't accumulated 12 penalty points in each scoring cycle after ten years, congratulations! You can then get a long-term valid driver's license. I just renewed mine last year—you can make an appointment three months in advance using the Traffic Management 12123 App. Just bring your ID card, old driver's license, and medical examination form. A reminder to everyone: a long-term license doesn't mean you can ignore it forever. Once you reach 70 years old, you still need to undergo an annual medical checkup and submit the report. It's always best to follow traffic rules diligently to avoid any issues when renewing your license, like finding out you've exceeded the penalty points limit—that would be a real waste.

Was this review help?
12
Share
Expand All
ElliotMarie
10/19/2025, 10:20:39 PM

I renewed my long-term driver's license last year. It's best to prepare the materials 90 days in advance before the 10-year expiration. The key point is whether you've had all 12 points deducted in any year during the decade—if you meet the standards, you can get the long-term license. Renewing is quite convenient now; it takes just 20 minutes at the traffic management office. A quick tip: although the long-term license saves hassle, remember to check your license status annually, especially for drivers with Class C or above licenses—they need to submit a medical examination certificate every year starting at age 60. Developing good driving habits is the most practical approach—safe and worry-free.

Was this review help?
18
Share
Expand All
AryaRose
12/02/2025, 09:50:11 PM

I've done some research on renewing a driver's license after ten years. If you haven't accumulated 12 penalty points in any scoring cycle during those ten years, you can get a long-term valid license. However, there are rules for long-term licenses too - those over 70 need to submit annual medical reports. My colleague recently renewed theirs and didn't even need to retake the license photo, as the system directly used their ID photo. I recommend clearing all traffic violations before renewal to avoid complications. Always drive carefully to prevent violation records from affecting your license renewal.

Was this review help?
1
Share
Expand All
MacTeagan
01/22/2026, 11:13:49 PM

I just renewed my long-term driver's license last month. The key to renewing a 10-year license upon expiration is checking the penalty point record. You can only get a long-term license if you haven't accumulated 12 points in each scoring cycle. Required documents include ID card, old driver's license, and medical examination form. Here's an extra reminder: many novice drivers think a long-term license means no more worries, but actually drivers aged 60+ must submit annual medical reports, especially those with C-class or higher licenses. The renewal process is quite smart now - it takes just five minutes at self-service machines, but make sure to pay any traffic fines in advance.

Was this review help?
15
Share
Expand All
DeDaniel
04/18/2026, 10:52:47 PM

A decade ago, I obtained my second driver's license, and now I've just renewed it for a long-term one. When renewing after the 10-year expiration, the main consideration is the traffic violation record within that decade—as long as you haven't had all 12 points deducted, you can get a long-term valid license. In practice, pay attention to three key points: first, settle all traffic violations in advance; second, don't wait until the last few days of the validity period to renew; third, remember to check if your ID card is still valid. Although a long-term license saves you the hassle of frequent renewals, maintaining safe driving habits is essential—after all, safety is the shortest path home.

Was this review help?
20
Share
Expand All
More Q&A

What are the symptoms of a seized brake caliper?

The symptoms of a seized brake caliper may include overheating of the brake disc, caliper damage, and inability to press the brake pedal. Causes of brake disc overheating: In severe cases, it can lead to tire explosion, making driving unsafe. Caliper damage: Caliper damage is somewhat related to not replacing the brake disc and brake pads in time. When the brake disc and brake pads are worn to their limits, continued use may lead to caliper damage. The brake caliper can only be replaced as a whole unit and cannot be repaired. Therefore, it is essential to regularly check the wear condition of the brake pads and brake disc. Inability to press the brake pedal: This is related to the brake fluid. Not replacing the brake fluid for a long time can cause the brake caliper to seize. Therefore, it is necessary to replace the brake fluid regularly, generally every three years or 60,000 kilometers.
120
Share

Why does car touch-up paint bubble?

The causes of bubbling in car touch-up paint include poor paint quality, inadequate construction conditions and processes, and uneven paint application. Below are relevant details about touch-up painting: 1. Process: Determine the repair area - Assess the extent of damage - Implement construction protection - Surface preparation - Masking and degreasing - Applying base coat - Applying clear coat - Blending treatment - Baking - Sanding and polishing. 2. Quick repair precautions: Primer - The substrate must be completely dry before applying the clear coat to avoid loss of gloss. Base coat - Single-component paint must be used for quick repairs. Clear coat - The spraying pressure should not be too high (2-2.5KPa). Allow 1-2 minutes between coats, depending on the ambient temperature; lower temperatures require longer intervals, while higher temperatures allow shorter intervals. The spraying thickness should be 1.5-2 coats, not too thick, or it will not dry easily. After applying the clear coat, let it sit for 5 minutes before baking. Baking and sanding - Use P1500-P2000 sandpaper to sand away dust spots and achieve a matte finish (dry sanding is recommended; if wet sanding, use plenty of water to prevent scratches from embedded grit). Lightly sand the blending area. Polishing and buffing - Use polishing compound.
116
Share

What Causes the Grinding Sensation When Braking Hard?

Car brakes produce a grinding sensation when braking hard due to metal hard spots on the brake pads, severe wear of the brake disc, or small stones/water film between the brake disc and pads. Below are detailed explanations: Metal hard spots on the brake pads: If there are tiny metal particles on the brake pads, they will create a screeching sound when braking. This can be resolved by braking hard several times, sanding, or replacing the brake pads. Severe wear of the brake disc: After prolonged use, the car's brake disc may develop deep grooves at the friction points with the brake pads, leading to unusual noises or vibrations when braking. If the grooves are shallow, sanding the edges of the brake pads may help. However, if the grooves are deep, replacing the brake pads is necessary. Small stones or water film between the brake disc and pads: If the car has been driven on gravel roads, in sandy/dusty weather, or just after washing, check for and remove any small stones. Alternatively, pressing the brakes several times can help eliminate the water film.
102
Share

Can Car Windshield Washer Fluid Be Used to Clean Household Glass?

Although windshield washer fluid can be used to clean windows and can effectively remove dirt, it is not necessarily the only option for window cleaning. Below is an introduction to car windshield washer fluid: 1. Product Usage: It is widely used for quick stain removal and bright cleaning of various types of glass, including car windshields, rearview mirrors, household glass, office glass, door and window glass, and decorative glass. 2. Types: The first type is for summer use, which includes insect-removing agents in its formula to quickly eliminate insect residues on windshields and also effectively remove insect marks on the front of the car. The second type is an antifreeze version designed for winter use, ensuring that it does not freeze or damage car equipment even when the temperature drops below -20°C. In cold winter weather when windshield cleaning is needed, this fluid not only cleans effectively but also helps absorb static electricity, offering multiple benefits in one. The third type is a special antifreeze formula that remains unfrozen even at -40°C, making it suitable for use in the extremely cold regions of northern China.
113
Share

What are the reasons for the Buick GL8 air conditioning not cooling?

The reasons for the Buick GL8 air conditioning not cooling are: 1. Incorrect gear setting; 2. Insufficient refrigerant; 3. Compressor failure; 4. Blockage of the throttle valve and idle valve in the throttle body. Solutions for the Buick GL8 air conditioning not cooling: 1. Replace the refrigerant; 2. Replace the compressor; 3. Clean the dirt from the throttle valve and idle valve in the throttle body. Air conditioning, short for the automobile air conditioning system, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the vehicle cabin to an optimal state. Its functions are: 1. To provide a comfortable riding environment for passengers, reducing travel fatigue; 2. To create good working conditions for the driver, ensuring driving safety.
105
Share

What are the safety devices of the transmission control mechanism?

The safety devices of the transmission control mechanism include self-locking devices and interlocking devices. Most self-locking devices of transmissions consist of self-locking steel balls and self-locking springs, while interlocking devices mainly comprise interlocking steel balls and interlocking pins. That is, elements such as balls, pins, sliders, or frame plates are added between the shift fork shafts to limit the movement trajectory of the gear lever and also prevent the simultaneous engagement of two gears. The transmission control mechanism is used to change the gear combination of the transmission to achieve gear shifting. Under the operation of the driver, the transmission control mechanism can quickly, accurately, and reliably disengage, engage a certain gear, or return to neutral.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.