···
Log in / Register

How many times should the one-button start-stop be pressed?

1Answers
EliasMarie
09/02/2025, 12:02:27 AM

To turn off the engine, press and hold the one-button start-stop for more than 3 seconds or press it three times consecutively. Here is relevant information: 1. Sudden engine stall: If the engine stalls while the vehicle is in motion, you can restart the engine by shifting the gear lever to the N (neutral) position without pressing the brake pedal and then pressing the one-button start-stop. 2. Low battery: If the smart key battery is low or the smart key is not functioning properly, replace the battery promptly. If you need to use the vehicle, you can open the door with the mechanical key and insert the smart key into the smart key cylinder to start the engine.

Was this review help?
101
Share
More Q&A

How to Wax a Car in Winter?

Winter car waxing method is: 1. Wash the car thoroughly with dedicated car shampoo; 2. After rinsing, dry the car completely with a clean cloth to prevent water spots affecting wax application; 3. Move the car to a shaded area, apply solid car wax using a dedicated circular sponge, spreading evenly on the paint surface; 4. Use circular motions to create a fish-scale pattern; 5. Allow 5-10 minutes for the wax to dry completely; 6. Remove excess wax with a microfiber towel.
101
Share

Where is the cigarette lighter fuse located in the Chevrolet Sail?

The cigarette lighter fuse in the Chevrolet Sail is located in the storage compartment above the hood release handle on the left side of the steering wheel. Taking the 2013 Chevrolet Sail as an example, it is a compact car with the following dimensions: length 4249mm, width 1690mm, height 1503mm, wheelbase 2465mm, fuel tank capacity 42L, trunk capacity 370L, and curb weight 1040kg. The 2013 Chevrolet Sail is equipped with a 1.2L naturally aspirated engine, delivering a maximum horsepower of 87PS, maximum power of 64kW, maximum torque of 115Nm, and paired with a 5-speed manual transmission.
116
Share

Can a replaced car trunk be detected?

Specific observations can be made from the following aspects: 1. Color difference: If the trunk has been replaced, there may be a certain color difference between it and the body. It's quite simple—compare the color of the trunk with the nearby ABC pillars. If the difference is too significant, there's likely an issue. There's no need to compare it with the entire body. 2. Fit: Sometimes, even after replacing these parts, they may still fit perfectly. 3. Car windows: In more severe accidents, the car windows may have cracked or at least been damaged, requiring replacement. Therefore, clues can also be found through the car windows. However, this is not 100% accurate, as sometimes replacing the trunk may not involve replacing the windows.
117
Share

What is the status of ETC activation?

The status of ETC activation is a successful connection, and the bound electronic device will receive an SMS notification. This allows the vehicle to use the ETC-exclusive lanes when entering and exiting highways without the need to stop for toll payment. The ETC system requires the use of a rechargeable card, which must be inserted when using the system. If the ETC system is not needed, the card can be removed. ETC, which stands for Electronic Toll Collection, is a specialized road tolling method typically used on highways, toll bridges or tunnels, and certain urban road sections to alleviate traffic congestion. ETC works through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at toll stations. It utilizes computer networking technology to process backend settlements with banks, enabling vehicles to pass through toll stations without stopping to pay tolls.
103
Share

What does it mean when the car displays 'nokey'?

When the car dashboard displays 'nokey', it could be due to the following situations: 1. Low battery in the key. 2. Interference from in-car devices: Heads-up display, navigation, tire pressure monitoring, etc., these devices may interfere with the sensor receiving signals from the key. 3. Sensor malfunction: There are key sensors located in the vehicle's dashboard, under the center console, and under the rear seats, etc. If these sensors malfunction or the connectors become loose, the vehicle may fail to detect the key. 4. Low vehicle battery: If the vehicle's battery is low, it cannot power the vehicle's electrical devices, and naturally, it won't be able to detect the remote key.
116
Share

Does Not Pressing the Unlock Button While Shifting Gears in a BMW Damage the Car?

Not pressing the unlock button while shifting gears in a BMW does not damage the car. Below is an introduction to the BMW X3: 1. Powertrain: The BMW X3 is equipped with a 2.0T turbocharged engine. BMW offers three powertrain variants for the X3, all featuring the 2.0T turbocharged engine but with different power outputs: 25i, 28i, and 30i. 2. Engine Specifications: The 25i model's engine delivers a maximum power of 135 kW and a maximum torque of 290 Nm. The 28i model's engine produces a maximum power of 165 kW and a maximum torque of 310 Nm. The 30i model's engine generates a maximum power of 185 kW and a maximum torque of 350 Nm.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.