What are the differences between the VV6 and VV7?

Why do the high and low beams of Jinbei headlights not work?

The reasons why both the high and low beams of Jinbei headlights do not work are as follows: It may be due to bulb damage, and the bulb should be replaced. The high beam combination switch is faulty and needs to be replaced. Poor contact of the wiring behind the headlight, unplug the wire connector and clean it with an eraser before reconnecting. Below is an introduction to the functions of car lights: Car headlights: Used for road illumination during nighttime driving. High beams: High beams have a high angle and long distance, improving visibility and expanding the field of view. Width indicator lights: Indicate the width of the vehicle to alert other drivers and vehicles behind. Width indicator lights are used during evening driving to make the vehicle visible to others. Low beams: Low beams have a low angle and short distance, allowing clear distinction of objects and making a 2-3 meter diameter illuminated area on the ground clearly visible. The area from the beam cutoff line to 30-40 meters mainly relies on ground-reflected light, where brightly colored objects can be distinguished, but stationary dark-toned objects on the road may not be easily noticed.

105

Share

Is it necessary to complete a change registration for altering the vehicle body color?

Changing the color of the vehicle body requires registration. However, vehicle modifications are subject to certain restrictions, and arbitrary modifications may not pass the annual inspection. Therefore, vehicle modifications must be carried out in compliance with relevant regulations. Required documents: Original copy of the "Motor Vehicle Change Registration/Record Application Form", original and one copy of the identity proof of the motor vehicle owner, original motor vehicle registration certificate, original motor vehicle license, etc. Change registration is required for: altering the body color, replacing the engine, replacing the body or frame, replacing the entire vehicle due to quality issues, changing the use nature from commercial to non-commercial or vice versa, or when the motor vehicle owner's residence moves out of or into the jurisdiction of the vehicle management office, among other situations. To change the appearance of the vehicle, an application must be submitted to the vehicle management department, and the vehicle license must be updated promptly. Only then can the modified vehicle be legally driven. Currently, there are generally two types of vehicle modifications in China: one involves specialized vehicle modification manufacturers using nationally certified engines, chassis, or assemblies to redesign and modify vehicles that differ from the original models; the other involves already licensed vehicles undergoing some technical modifications based on the original assemblies for specific purposes.

104

Share

Why can't my Land Rover play music when a USB is plugged in?

The USB drive may be incompatible, possibly due to excessive capacity. Generally, car USB ports work better with MP3 format files, so pay attention to the music format. The USB drive needs to be in FAT32 format. If it isn't, reformat it to FAT32. The USB should have a single partition without any hidden partitions (USB drives used as bootable drives have hidden partitions). Here are some relevant details: USB issues: Check if the USB has been used as a bootable drive, encrypted drive, or had partitions created with encryption software, or if it was formatted as a bootable CD-ROM. If it was used as a bootable drive, restore it to a normal USB using bootable drive creation tools. If it was encrypted, use mass production tools to revert it to a normal removable disk. Avoid partitioning it in NTFS format; instead, right-click and format it as FAT32. After this, most car infotainment USB ports should recognize it. Formatting: If a standard USB drive (not used as a system drive) encounters this issue, it's rare and likely related to the car's infotainment system. You can use a Windows 7 or later system to format the USB as exFAT. Some car infotainment systems may not recognize FAT32 but can read exFAT32. After switching to exFAT, both computers and car infotainment systems will recognize it, and exFAT supports single files larger than 4GB on the USB drive.

118

Share

Will the car door lock automatically if forgotten?

No. Forgetting to lock the car after parking happens from time to time, which can lead to the risk of theft of belongings in the car, causing significant trouble and loss to work and life. Generally, when the key is removed to cut off the power and the door is closed, the driver actively locks the car using the remote key. This is because most car models on the market do not have the function of detecting the distance of the key's electronic signal, so the automatic locking cannot be completed by the car itself. Additional tips: Try to use the mechanical key to lock the car door: When locking the car, it is more reliable to use the mechanical key, as this makes any signal jammer ineffective. If you don't mind the inconvenience, using the mechanical key more often can also save power and is even safer than the smart key. When using the mechanical lock, make sure the car door is properly closed and you hear the sound of the entire car locking, otherwise, it means the locking was not successful. Try to park in a guarded parking lot and ask for a parking receipt: For long-term parking, it is best to park in a guarded parking lot and ask for a parking receipt. This way, if any issues arise with the car, you can ensure no loss occurs. However, you should still lock the car door. Of course, in general, formal parking lots are rarely entered by criminals.

103

Share

What is the appropriate slope for a car at the entrance?

Generally, it should not exceed 15%. The straight gentle slope at the entrance and exit should be 7.5% within a range of 3.6 meters, and the curved gentle slope should be 7.5% within 2.4 meters to prevent the front and rear chassis of the vehicle from scraping. Below is relevant information about car ramp slopes: Straight ramp: The ramp width should not be less than 1200, and the slope should not exceed 1:12. Switchback double ramp: The ramp width is 1200, the slope is 1:12, and the depth of the ramp start, end, and rest platform is 1500. L-shaped ramp: The ramp width is 1200, the slope is less than 1:12, and the depth of the ramp start, end, and rest platform is 1500. Slopes greater than 10%: When the slope exceeds 10%, gentle slopes should be installed at both the upper and lower ends of the ramp. The horizontal length of the straight gentle slope section should not be less than 3.6m, and the gentle slope gradient should be half of the ramp slope. The horizontal length of the curved gentle slope section should not be less than 2.4m, the curve radius should not be less than 20m, and the midpoint of the gentle slope section should be the original start or end point of the ramp.

117

Share

How many photos are required for a driver's license?

2-3 photos (regulations vary slightly by region, please refer to local regulations). One-inch white background color photos are required. Below is the relevant information: Required documents: "Motor Vehicle Driver's License Application Form"; Original and photocopy of valid identity proof: Residents within Bazhou submit "Resident ID Card" or "Resident Household Registration Book"; Non-Bazhou residents submit "Resident ID Card" (or "Resident Household Registration Book") and "Temporary Residence Permit"; Hong Kong and Macau residents submit "Mainland Travel Permit for Hong Kong and Macau Residents", Taiwan residents submit "Mainland Travel Permit for Taiwan Residents"; Overseas personnel submit passport and residence permit; Active military personnel (including armed police) submit "Resident ID Card"; Motor vehicle driver's license; "Motor Vehicle Driver Physical Condition Certificate" issued by a county-level or higher medical institution or a military regiment-level or higher medical institution; Three one-inch white background color photos without hats; Additional information: Motor vehicle drivers should apply for a license renewal at the vehicle management office of the driver's license issuing place within one year before the expiration of the motor vehicle driver's license. When applying, fill out the "Motor Vehicle Driver's License Application Form" and the "Driver Physical Condition Certificate Form", and undergo a physical examination at the physical examination room set up by the No. 2 Agricultural Division Hospital at the vehicle management office or obtain a physical condition certificate issued by a county-level or military regiment-level or higher medical institution. Submit the driver's license and ID card photocopies, along with three one-inch white background color photos.

116

Share

What are the differences between the VV6 and VV7?

Why do the high and low beams of Jinbei headlights not work?

Is it necessary to complete a change registration for altering the vehicle body color?

Why can't my Land Rover play music when a USB is plugged in?

Will the car door lock automatically if forgotten?

What is the appropriate slope for a car at the entrance?

How many photos are required for a driver's license?

How is the Dongfeng Citroen C3-XR?

Does the ABS Anti-lock Braking System Increase Braking Distance?

What is the classification of flood damage levels?

Is It Advisable to Buy a Second-Hand Car That Has Been Rear-Ended?