···
Log in / Register

How many seconds does the Mistra take to accelerate from 0 to 100 km/h?

6Answers
AngelaDella
09/07/2025, 01:24:44 AM

The Mistra comes with two engine options. The 1.8L Mistra has a 0-100 km/h acceleration time of 11.8 seconds, while the 1.6T Mistra accelerates from 0 to 100 km/h in 9 seconds. Here is some relevant information about the Mistra: Mistra model introduction: In 2013, Beijing Hyundai developed and manufactured the first-generation Mistra specifically for Chinese consumers' needs and preferences. With "the price of an A-segment car and the comfort of a B-segment car," it quickly became one of the most popular products in the family sedan market. Market positioning: The new-generation Mistra is positioned as a mid-to-high-end sedan, featuring class-leading space and intelligent technology configurations. It provides users with a more efficient travel experience and a more enjoyable driving experience, realizing users' ideal new way of intelligent living.

Was this review help?
105
Share
Haley
09/19/2025, 12:41:16 AM

As someone who frequently test drives various cars, I can share my experience with the 0-100km/h acceleration of the Mistra. The mainstream Mistra models are equipped with either a 1.8L or 2.0L naturally aspirated engine, with official test times ranging from approximately 9.5 to 10.5 seconds. This speed is quite practical for daily driving, offering smooth starts and responsive performance without feeling sluggish. Factors influencing this time include engine horsepower, vehicle weight, and transmission type. Automatic transmissions might be slightly slower, but they offer a more hassle-free driving experience. During my test drive, I noticed that in urban conditions with moderate load, the actual time might extend slightly to around 11 seconds, as traffic light starts are often interrupted. To optimize acceleration, maintaining proper tire pressure and avoiding peak-hour congested driving are crucial. It's not a sports car, but it's more than adequate for family use, ideal for those prioritizing reliability and fuel efficiency. Additionally, regular engine maintenance and air filter replacements help maintain responsive performance.

Was this review help?
12
Share
Expand All
VanAlan
11/02/2025, 01:04:23 AM

I once commuted with a Mistra for over a year, and its 0-100 km/h acceleration time was generally around 9 seconds. To be more specific, the 1.8L version starts off gently, feeling like a steady acceleration rather than a fierce surge. This timing is sufficient for safe overtaking during daily commutes or highway driving. I noticed that acceleration performance is greatly influenced by driving habits; if you press the throttle lightly and avoid aggressive acceleration, you can save fuel and extend the lifespan of components. Vehicle weight is also a factor, as acceleration slows down by about a second when fully loaded. Practical testing suggests trying it on dry, flat roads, as it might be slightly slower in rainy or windy conditions. Overall, an acceleration time of around 9 seconds is suitable for ordinary families, and there's no need to obsess over the numbers. In terms of maintenance, I regularly check the engine oil condition to ensure engine health. I chose this car for its practicality and stability, and there's no need to pursue faster speeds.

Was this review help?
12
Share
Expand All
OReid
12/16/2025, 12:08:23 AM

I've tested the acceleration of the Mistra to 100 km/h several times, mostly within the range of 9.5 to 10 seconds. This speed is based on the standard engine configuration, emphasizing fuel efficiency over performance. The longer acceleration time indicates higher engine efficiency, such as the lower fuel consumption of the 1.8L model. In actual driving, I find that smooth starts save fuel and also reduce exhaust emissions. Factors like temperature can affect performance: the engine responds faster in cold weather, while it may slow down in summer with the air conditioning on. This isn't a drawback—it's just right for family use and city commuting where high-speed racing isn't the goal. Gentle driving is recommended to maintain low fuel consumption.

Was this review help?
15
Share
Expand All
LaLouis
02/05/2026, 12:57:31 AM

Driving the Mistra on the highway, it accelerates from 0 to 100 km/h in about 10 seconds, depending on the configuration. I noticed a steady start in 9 seconds during safety tests, which is beneficial for road adaptation and avoids sudden acceleration that could lead to loss of control. For example, driving the Mistra in rainy conditions, the uniform acceleration reduces the risk of skidding. Load and tire grip also play a role; when driving with family, I ensure not to overload and switch to winter tires for added safety. It's not racing-grade, but practical and reliable. Maintaining the drivetrain is key.

Was this review help?
18
Share
Expand All
BarrettLynn
04/30/2026, 05:04:21 PM

The 0-100 km/h acceleration time of the Mistra varies by model. The older 1.8L version may take around 10 seconds, while the newer turbocharged version reduces it to approximately 8 seconds. Based on my research of test data, engine performance differs significantly: the 2.0L automatic model clocks about 9.2 seconds, whereas the 1.8L manual version approaches 10.5 seconds. Factors like road conditions and driving style affect results – for example, hill starts will be slower. During test drives, it's advisable to conduct multiple runs; proper maintenance can optimize acceleration performance.

Was this review help?
6
Share
Expand All
More Q&A

What is the difference between an L3 engine and an L4 engine?

The difference between an L3 engine and an L4 engine lies in the number of cylinders: the L3 is a three-cylinder engine, which has a simple structure, small size, and light weight; the L4 is a four-cylinder engine with a relatively more complex structure. The 'L' stands for inline, and the number following it indicates the engine code. Currently, the main types of engines used in automobiles are L3, L4, L5, and L6. An inline engine is one where all cylinders are arranged side by side in a single plane. It features a simple cylinder block and crankshaft structure, uses a single cylinder head, and offers high stability, good low-speed torque characteristics, low fuel consumption, compact internal dimensions, and wide applicability. An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. The term 'engine' can refer to either the power generation device or the entire machine including the power unit.
120
Share

What is the fuel consumption of the fourth-generation Fit?

The comprehensive fuel consumption of the Fit is 5.2-5.6L/100km. There are currently 6 models of the Fit on sale. The comprehensive fuel consumption of the Trend Start version is 5.2L/100km. The Trend Enjoy version and Trend Run version have a comprehensive fuel consumption of 5.3L/100km. The Trend Max version, Trend version, and Trend Run Pro version have a comprehensive fuel consumption of 5.6L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.5-8.1L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and accelerate slowly. Avoid suddenly pressing the accelerator hard, as this will multiply fuel consumption. Light acceleration, light braking, and early braking: When driving, press the accelerator lightly, try to avoid sudden increases in engine speed, and prevent the car from shaking during driving, making the car more fuel-efficient. By estimating road conditions and adopting slow and uniform acceleration or braking, fuel economy can be increased by up to 20%. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in the metric system relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or inspection of the vehicle: Regular oil changes can reduce carbon deposits (carbon deposits can cause poor ignition, sluggish acceleration, increased fuel consumption, and even cylinder misfires in severe cases); regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body according to mileage. Close the windows when driving. Driving with the windows open increases wind resistance. The greater the wind resistance, the greater the resistance the car encounters, requiring more power and thus increasing fuel consumption.
118
Share

Where is the Bluetooth switch located in the Toyota Prado?

The Bluetooth switch in the Toyota Prado is located on the central control screen. You can click the menu button on the central control screen and then select Bluetooth to turn it on or off. The Prado, also known as the Land Cruiser Prado, is a mid-to-large-sized SUV under the Toyota brand. As the latest model in the Toyota Land Cruiser series, the Prado boasts excellent power performance and meets the Euro III emission standards. The domestic version of the new Prado is equipped with a 3.5-liter naturally aspirated V6 engine. The engine code is 7GR-FKS, with a maximum power output of 206 kW and a maximum torque of 365 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 4500 rpm. It features VVT-i technology and hybrid injection technology, with an aluminum alloy cylinder head and block. The engine is paired with a 6-speed manual transmission. The Prado's front suspension uses a double-wishbone independent suspension, while the rear suspension employs a four-link non-independent suspension. Additionally, the vehicle is equipped with a part-time 4WD system and features a body-on-frame design, giving it strong off-road capabilities.
112
Share

What are the medical examination items for driver's license renewal after expiration?

Driver's license renewal medical examination mainly includes vision test and color blindness test. In addition, there are several other items such as grip strength, squat and stand up, blood pressure, hearing, and electrocardiogram. When renewing the license, you also need to bring your own photos, which require three white background photos. Notes for driver's license renewal: If the driver's license is not renewed at the traffic police department one year after its expiration, or if drivers aged 60 or above fail to submit physical examination documents within one year after the end of a scoring cycle, the driver's license will be revoked. According to the driver's license usage regulations, drivers can apply for license renewal up to 90 days before the expiration of their driver's license. According to Article 49 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Order No. 111 of the Ministry of Public Security), motor vehicle drivers holding large passenger vehicles, tractors, city buses, or medium-sized passenger vehicles must undergo a physical examination every two years and submit a medical certificate issued by a county-level or military regiment-level medical institution within 15 days after the end of the scoring cycle.
107
Share

Where is the rear camera of the dash cam installed?

The rear camera of a dash cam is generally installed at the top left or top right corner of the license plate, and some are installed directly above the license plate. In practice, the installation position may vary slightly depending on the brand and the camera angle. The purpose of a dash cam is to protect the driver's legal rights and avoid extortion or blackmail; to help traffic police accurately and quickly handle traffic accidents; to reduce driver violations and lower the probability of traffic accidents; and to assist courts in making accurate judgments when handling traffic accident cases. Dual cameras cover both the front and rear views of the vehicle, providing comprehensive protection for the owner and driving safety. Installation method for the rear camera of a dash cam: Connect the rear camera plug and the power plug on the cigarette lighter, and confirm whether the front and rear cameras can work properly. If everything is correct, start routing the wires; Insert the wires into the plastic panel above, connect to the fuse box, and use a test pen to check before connecting; Use a scraper to guide the rear camera wire to the rear windshield and secure it properly; Remove the panel above the rear windshield, pull the wire through the hole, install the camera on the removed panel, and then reinstall the panel; After installing the camera, check its working status. Insert the plug into the display screen to see the rear recording. If it is not suitable, adjust the camera accordingly.
115
Share

What models does Dongfeng Nissan have?

Dongfeng Nissan brand models include: Sylphy, X-Trail, Qashqai, Teana, Tiida, Bluebird, Kicks, Murano, Livina, Sunny, Cima, Sylphy Zero Emission, March, Murano Hybrid, etc. Dongfeng Nissan Passenger Vehicle Company consists of Huadu Plant, Xiangfan Plant, Engine Branch, and R&D Center. The latest X-Trail model uses a 1.5T VC-Turbo engine with a maximum power of 204 horsepower and maximum torque of 300 N·m. The compression ratio can intelligently switch between 8:1 and 14:1, delivering strong power with low fuel consumption. The transmission part uses a CVT gearbox that can simulate 8-speed shifting, with a maximum torque capacity of 330 N·m. The suspension structure consists of front MacPherson and rear multi-link. The latest Teana model uses a variable compression turbocharged engine, a 2.5-liter four-cylinder with a maximum power of 188 horsepower and maximum torque of 180 N·m. The continuously variable automatic transmission (CVT) powers the front wheels of the car and comes with numerous advanced driving assistance systems, such as ProPilot Assist. The latest 14th-generation Nissan Sylphy maintains basically the same body dimensions as the old model, with length, width, and height of 4641/1815/1450 mm respectively, and a wheelbase of 2712 mm. In terms of power, the Sylphy is equipped with an HR16, a 1.6-liter naturally aspirated four-cylinder engine.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.