···
Log in / Register

How many points are deducted for touching the line with the rearview mirror in Subject 2?

6Answers
ODelilah
07/28/2025, 02:54:13 PM

During the Subject 2 driving test, if the rearview mirror touches the line, it results in an immediate failure, and all points will be deducted. Key points for Subject 2: While learning and taking the Subject 2 test, besides adjusting the rearview mirrors, it's also crucial to adjust the seat of the test vehicle. Only by fixing the viewing angle can you accurately spot the reference points during the test. Scoring rules for reverse parking: Drivers who do not follow the prescribed route or sequence will fail immediately. Those whose vehicle body crosses the line, fail to complete the reverse parking, or do not have both front tires pass the control line before reversing will also fail. Additionally, exceeding the 210-second time limit for the task results in an automatic failure.

Was this review help?
106
Share
LeGarrett
08/11/2025, 06:48:27 PM

Last week, I just finished my driving test (Subject 2), but the examiner immediately stopped me because the rearview mirror touched the line during a turn, resulting in a 100-point deduction and an outright failure. I was utterly devastated! The rule is quite strict—having the mirror cross the line isn’t considered a minor mistake since it means the car body wasn’t within the safe zone, and the examiner worried it might hit roadside obstacles or pedestrians. Since then, I’ve been practicing right-angle turns daily in the parking lot, aligning with a fixed reference point and driving slowly to avoid repeating the mistake. Also, don’t get too nervous during the test—panic can easily lead to shaky hands and crossing the line. Pay extra attention to mirror angles during regular parking too; adjusting them higher to see ground lines helps prevent scratches in everyday driving.

Was this review help?
6
Share
Expand All
StLondyn
09/30/2025, 12:34:23 AM

During driving school instruction, I always emphasize that touching the line with the rearview mirror is a cardinal sin in Subject 2, resulting in an immediate 100-point deduction and failure. This is no trivial matter - the rearview mirror is part of the vehicle body, and touching the line equals crossing boundaries. Examiners view this as imprecise vehicle control that increases accident risks. Students often stumble here, particularly during reverse parking and curve driving sections. My recommendation is to properly adjust mirrors to see both the wheels and edge of the ground lines during practice, using slow speeds and repeated steering corrections. Developing this habit not only makes the test easier but also ensures safer, more reliable driving in real road conditions later.

Was this review help?
10
Share
Expand All
McIsaac
11/13/2025, 01:26:11 AM

The year I took my driver's license test, a young man in the same car lost 100 points for his rearview mirror crossing the line, ending the test instantly. The instructor said that any part of the vehicle crossing the line is considered a serious violation, resulting in an immediate failure in Subject Two. This reminds us to be meticulous when driving—don't underestimate small mirrors, as incorrect positioning can lead to major mistakes. I still remember that during the test, it's important not to rush, maintain a steady speed, and use peripheral vision to check if the mirrors and lines are parallel. During regular practice, use ground markings as references to adjust your habits. Once you develop good habits, even daily parking can avoid many minor scrapes.

Was this review help?
13
Share
Expand All
MacAurora
01/03/2026, 03:08:54 AM

Failing to keep within the lines with the rearview mirrors during the Subject 2 driving test indeed results in a full 100-point deduction, leading to immediate disqualification. As an experienced driver, this is particularly serious because it indicates your vehicle isn't centered, potentially risking curb collisions or side scrapes. When teaching my daughter to drive, I repeatedly emphasized: don't rush during the test—first ensure the mirrors are properly adjusted, and when reversing, frequently turn your head to check positioning. Safety comes first; while crossing lines seems minor, the consequences are severe. Developing this awareness can prevent major issues on the road later. Regular parking practice yields noticeable improvements.

Was this review help?
3
Share
Expand All
NovaMarie
03/31/2026, 03:37:41 AM

In car enthusiast groups discussing driving tests, touching the line with the rearview mirror is generally penalized with a full 100-point deduction because it means the vehicle body crosses the boundary. I almost made this mistake during my own test, but luckily I had adjusted the mirror angle beforehand to see the wheel position. The rules are quite rigid—any slight contact with the line is penalized, as examiners worry it might interfere with the test line markings. It's recommended to frequently simulate test scenarios during practice, such as using driving school model training cars to set up virtual lines for practicing turning techniques. Additionally, mirror cleanliness is crucial—dust can obstruct vision, indirectly leading to line contact. After such intensive training, the test naturally becomes less troublesome.

Was this review help?
18
Share
Expand All
More Q&A

Why doesn't the air conditioner blow hot air?

Because the air conditioner has an anti-cold air function, the wind blowing in when the air conditioner is first turned on will be cold. Wait a few minutes. The following are other reasons why the car air conditioner does not blow hot air: 1. Lack of refrigerant or a leak somewhere: Most cases of the air conditioner not cooling are due to a lack of refrigerant. You can first measure the air conditioner pressure. If both high and low pressures are low, it is basically a lack of refrigerant, and you just need to add it until the pressure is appropriate. 2. Excessive pressure in the air conditioning system: The car air conditioning system has its own pressure because the compressor is pressurizing it. When too much refrigerant is added or there is a blockage in the pipeline, the system pressure can become too high. At this point, the control system will disconnect the compressor's electromagnetic clutch, causing the compressor to stop. The solution is simple: after confirming that the pressure exceeds the standard, discharge some refrigerant to restore normal pressure. 3. Damaged evaporator temperature sensor or pressure switch: The evaporator, also called the evaporator box, is located in the air duct under the dashboard. The refrigerant vaporizes and absorbs heat here to produce low temperatures. When the airflow passes through the small channels in the evaporator, it is cooled. When it approaches the frost temperature, the compressor stops. If this sensor is damaged and frequently reports false alarms of approaching frost temperature, the compressor will frequently stop.
102
Share

Can I drive on the highway during the probationary period?

During the probationary period, you can drive on the highway, but you must be accompanied by a driver who has held a driving license for the corresponding or higher vehicle type for more than three years. Otherwise, if you are caught driving alone on the highway, you will be fined between 20 and 200 yuan and ordered to leave the highway at the nearest exit. Here are the reasons why you cannot drive alone on the highway during the probationary period: 1. Insufficient driving experience: The psychological resilience is not strong enough, and you may not be able to calmly handle emergency situations such as sudden braking by the vehicle in front or illegal lane changes by the vehicle in front. Applying too much force at once can easily cause the vehicle to lose control. 2. Slow driving in the lane: When the speed increases, it is inevitable to feel afraid, and the speed is often reduced. If you occupy the fast lane and drive slowly, it is also very dangerous. 3. Not checking the rearview mirror: As a beginner, if you haven’t developed this habit, you may easily forget to check the rearview mirror when changing lanes.
112
Share

What does odo mean on the car dashboard?

Odo on the car dashboard represents the total mileage of the vehicle. Cars also have a trip meter, which can calculate the distance traveled over a certain period of time. The trip meter is marked as 'trip'. The lower the mileage of the car, the less wear there is on the engine and transmission. How odo works: Since the diameter of the car's wheels is known, the circumference of the wheels is constant. From this, the number of rotations the wheels make per mile can be calculated, and this number is also constant. Therefore, by automatically accumulating the number of wheel rotations and then dividing by the number of rotations per mile, the mileage can be determined.
110
Share

What is the use of the M gear in a car?

It is used to obtain greater traction. For example: 1. Climbing steep slopes: You can use the M gear to shift to a lower gear, obtaining greater torque, which in simpler terms means better climbing ability. 2. Descending long slopes: You can also shift to a lower gear to use engine braking to slow down. This way, you don’t need to rely solely on the brakes to slow down continuously. Prolonged braking during long descents can lead to brake fade due to overheating. 3. The M gear can also help the car escape difficult situations: For example, if the car is stuck in sand and the tires are spinning, you can use the M gear, shifting to 2nd or 3rd gear to get out. Additional information: M gear usage tips: 1. Downshifting to overtake: When overtaking, if you are in D gear, the speed won’t increase rapidly even if you press the accelerator hard, as the car will only shift up sequentially to overtake. However, switching to M gear makes a big difference. Pressing the accelerator will allow the car to utilize the high torque of a lower gear for instant acceleration, completing the overtaking maneuver more quickly. 2. Driving on highways: It’s best to use manual mode when driving on highways, as it not only allows for quicker acceleration but also enables the use of engine braking during sudden stops. When driving at high speeds, if you need to brake, press the brake pedal while quickly pulling the gear lever back multiple times to force the car into a lower gear, generating strong engine braking to speed up deceleration.
106
Share

What Causes Brake Disc Noise?

Reasons for brake disc noise: 1. Rusty brake calipers: If brake fluid is not replaced for a long time, it will deteriorate, and the moisture in the fluid can cause the calipers to rust, leading to friction and noise. 2. Slow return of the master cylinder: Abnormal return of the brake calipers can also cause brake pad noise. 3. New car break-in period: The brake pads and discs of a new car are in a brand-new state and still in the break-in period, which may produce some noise. This is normal. 4. Foreign objects between the brake pads and discs: While driving, foreign objects like sand or gravel can get lodged between the brake pads and discs, causing noise during braking. 5. Hard brake pad material: Most OEM brake pads are made of semi-metallic materials, which can easily produce noise when rubbing against the brake discs. 6. Improper installation of the brake system: If the spacing between the brake pads and discs or the tightness of the nuts is not properly adjusted during installation, it can cause noise. 7. Noise during reverse braking: Since brakes mostly work during forward motion, prolonged wear in one direction can create burrs on the reverse side. When braking in reverse, these burrs rub against the brake disc, causing noise. Solutions for brake pad noise: For new cars, the noise will stop after the break-in period. For noise caused by foreign objects, the owner can have the brake discs cleaned at a repair shop, as the issue usually lies with the discs rather than the pads. For noise due to improper installation, it's recommended to visit a 4S shop to adjust the spacing and nut tightness. For noise during reverse braking, the brake pads can be removed and polished or replaced.
116
Share

Where is the VIN located on the Haima M5?

The VIN of the Haima M5 is located on the left side of the front windshield. The VIN, also known as the Vehicle Identification Number, consists of a unique set of 17 alphanumeric characters. This number is used to identify the manufacturer, engine, chassis number, and other details of the vehicle. The Haima M5 has a body length of 4698mm, width of 1806mm, height of 1477mm, and a wheelbase of 2685mm. It is equipped with a naturally aspirated 1.6L engine coded HM474Q-C, which delivers a maximum power output of 92 kW at 6000 rpm and a peak torque of 151 Nm.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.