···
Log in / Register

How many points are deducted for touching the line during reverse parking?

6Answers
VanAnthony
07/28/2025, 05:01:06 AM

Reverse parking with the vehicle body touching the line results in a 100-point deduction. Reverse parking became a mandatory item in the Subject 2 test for obtaining a small car driving license after 2013. It assesses the driver's ability to maneuver the vehicle within a designated area. Reverse parking is a key evaluation point in the driver's test, which involves correctly reversing the vehicle into a garage from both sides while in motion. Evaluation criteria for reverse parking: Scenario 1: Failure to follow the prescribed route or sequence results in a 100-point deduction and disqualification. Scenario 2: The vehicle body crossing the line, failing to enter the parking space, or stopping midway results in a 100-point deduction and disqualification. Scenario 3: Exceeding 210 seconds without completing the reverse parking results in a 100-point deduction and disqualification.

Was this review help?
120
Share
VonDaniela
08/11/2025, 11:32:49 AM

I remember when I was taking my driving test, the instructor always emphasized that reversing into the parking space had to be precise—touching the line was a big deal, an instant 100-point deduction with no room for negotiation. Why so strict? Because in real-life parking, touching the line often means you might scrape an obstacle or a pedestrian. The strictness in the test is meant to instill safe habits. I made this mistake too when I was younger—it felt like the whole test was wasted, and I had to retake it, which was incredibly stressful. Later, I realized the key was adjusting the rearview mirrors properly, keeping the speed slow, and steering steadily. With enough practice, it becomes second nature. Now, after 20 years of driving, every time I park, I remember that lesson—safety is far more important than points. Don’t underestimate this rule; it’s saved many new drivers. If you touch the line during the test, just reset your mindset and try again next time.

Was this review help?
14
Share
Expand All
RowanLynn
09/27/2025, 11:37:15 PM

As a new driver, I deeply understand that the reverse parking in Subject 2 is the hardest part. Touching the line deducts all 100 points, resulting in an immediate fail. On my test day, I was so nervous that my rear wheel almost touched the line, but luckily I corrected it in time. My friend actually touched the line and had to retake the test on the spot. The strict rules are designed to prevent new drivers from developing dangerous habits, as hitting the line while driving could lead to accidents. During practice, I learned to check the rearview mirror, maintain a slow speed, and make slight adjustments to the steering wheel. I recommend that new drivers simulate the test more often to familiarize themselves with the boundary lines of the test site. Remember, deductions aren’t punishments—they’re reminders to take it slow. Safe driving starts with the small details, and passing the test will give you a sense of accomplishment.

Was this review help?
19
Share
Expand All
DelJessica
11/11/2025, 12:32:46 AM

Safety comes first, and deducting 100 points for crossing the line during the test is very reasonable. The strict rules are designed to simulate real parking risks, as crossing the line indicates a potential collision, which can be highly hazardous. During practice, I noticed that beginners often make mistakes due to hastily turning the wheel or driving too fast. It's recommended to focus on the basics: adjust the seat and mirrors, accurately identify reference points, and operate smoothly. Don't be discouraged by point deductions; with a few more practices, you can avoid them.

Was this review help?
20
Share
Expand All
OZane
01/01/2026, 02:17:38 AM

Failing the reverse parking test by crossing the line is very common, and losing 100 points means failing the item, but don't lose heart. From my experience, the key is a steady mindset and precise movements. During practice, focus on the car's position and the distance from the boundary line, keep the speed at a crawl, and turn the steering wheel just right without overdoing it. Beginners often neglect adjusting the rearview mirrors or lean forward, affecting their view. When nervous during the test, take deep breaths and slow down your focus. The deduction rules are there to help us develop safe habits—master them, and you'll pass. Remember, parking safely is even more important in daily driving.

Was this review help?
11
Share
Expand All
OOlivia
03/29/2026, 03:34:07 AM

Haha, crossing the line during the test is like missing a basketball shot—getting docked 100 points really stings! But don’t panic; most beginners make this mistake. The strict rules are there to hammer home the importance of safety, as crossing the line indicates potential collision risks. When I was learning to drive, I kept making this mistake until I realized that slowing down and staying observant were key. I’d recommend new drivers practice with a friend, simulating test scenarios to get familiar with boundary distances. Losing points isn’t the end of the world—what matters is not repeating the mistake. The joy of passing the test makes it all worthwhile.

Was this review help?
3
Share
Expand All
More Q&A

Will Fuel Consumption Decrease After the First Maintenance of a New Car?

After the first maintenance of a new car, fuel consumption will decrease. Once the initial engine oil is replaced, many impurities and metal shavings are removed, improving lubrication, which certainly contributes to reducing fuel consumption. Engine oil plays a crucial role in lubricating the engine. The first maintenance is typically performed at 3 months or 5,000 kilometers. During the initial run-in period of the engine, impurities and metal shavings are generated, which are then drained and replaced along with the oil. In fact, personal driving habits also significantly affect fuel consumption. Most new car owners are beginners who are just starting to drive. They may not yet be proficient in controlling the throttle depth, coordinating the clutch and accelerator, or determining the right time to shift gears. For example, frequently driving at high RPMs in low gears can lead to higher fuel consumption during the break-in period.
107
Share

What to Do When the Car Won't Start After Overheating Due to Water Shortage

Solution for a car that won't start after overheating due to water shortage: First, open the hood to allow the engine to cool down and seek towing services. It is not advisable to force starting the car at this time, as it may cause further damage to the engine. When the engine overheats due to water shortage, the water temperature warning light on the dashboard will illuminate. If the owner notices this situation, correct measures should be taken immediately, and driving should not continue. Correct steps to handle engine overheating due to water shortage: 1. Find a safe spot to pull over and let the vehicle idle without turning off the engine, as shutting it off will stop the cooling fan and coolant circulation, making the engine even hotter; 2. Open the hood to increase air circulation, and after the water temperature drops, slightly loosen the radiator cap to release internal steam before fully opening it.
117
Share

Where is Haval cars produced?

Haval cars are produced by Great Wall Motors in Baoding City, Hebei Province. Haval is a sub-brand of Great Wall Motors, operating in parallel with the Great Wall brand, focusing primarily on SUV models. It utilizes independent logos and has separate systems for product development, production, and services, mainly engaged in the production and sales of SUVs. The Haval brand includes three series: H series, M series, and F series. The H series consists of eight models: Haval H2s, Haval H2, Haval H4, Haval H5, Haval H6, Haval H6 Coupe, Haval H7, and Haval H9. Taking the Haval H6 as an example, it is a compact SUV with dimensions of 4653mm in length, 1886mm in width, and 1730mm in height, and a wheelbase of 2738mm.
103
Share

What is the valve clearance of the Nissan Tiida?

The intake valve clearance of the Nissan Tiida is 0.18mm, and the exhaust valve clearance is 0.23mm. In terms of engine structure, automotive valves are divided into intake valves and exhaust valves. The function of the intake valve is to draw air into the engine to mix with fuel for combustion, while the function of the exhaust valve is to expel the burned exhaust gases and dissipate heat. The Nissan Tiida has a body length, width, and height of 4393mm, 1766mm, and 1539mm respectively, with a wheelbase of 2700mm. The car features a front-engine, front-wheel-drive layout, and its engine delivers a maximum power of 90kW, a maximum torque of 155Nm, a maximum power speed of 6000rpm, and a maximum torque speed of 4000rpm.
118
Share

How to Determine Insufficient Tire Pressure in a Car?

Methods to determine insufficient tire pressure in a car: 1. If the car has a tire pressure monitoring function, simply check the data on the dashboard. If the tire pressure is insufficient, the dashboard will give a warning; no warning means no problem. 2. If the car does not have built-in tire pressure monitoring, you can visually inspect the four tires when stationary to see if they appear similar. If a tire looks slightly flat and feels soft when stepped on, it indicates insufficient tire pressure. 3. When tire pressure is low, the car will feel softer when going over speed bumps or rough roads, and there will be a noticeable tilt with each bump. 4. Purchase a tire pressure monitoring device, insert it into the tire valve, and read the numbers. Generally, around 2.5 bars is normal, above 3 bars is too hard, and below 2.3 bars is insufficient.
110
Share

What to Do If the First Maintenance Is Overdue?

If the first maintenance is overdue, it is recommended that the car owner go to the 4S store for maintenance as soon as possible. The first maintenance is free of charge. The mileage for the first car maintenance is generally 5,000 kilometers, and only the engine oil and oil filter need to be replaced. Engine oil is very important for the engine and is called the blood of the engine. It plays the roles of lubrication, heat dissipation, cleaning, and sealing in the engine. The main tasks of the first car maintenance include: 1. Replacing the engine oil: Due to insufficient running-in between various parts of the car during the break-in period, debris is prone to occur, and there are more impurities mixed in the engine oil, which cannot provide good lubrication; 2. Replacing the three filters: The three filters of the car can provide a better working environment for the engine operation, avoiding impurities from mixing into the engine and affecting normal driving; 3. Checking whether the car's coolant level meets the specified requirements.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.