···
Log in / Register

How many points are deducted for stopping midway during the Subject 2 driving test?

6Answers
AdrielLee
07/29/2025, 08:38:17 PM

Stopping once during the Subject 2 driving test deducts 5 points. Below is a detailed introduction about the Subject 2 test: 1. Overview: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. The test items for small cars (C1/C2) include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. 2. Others: If the first attempt at the Subject 2 test is unsuccessful, a retake is allowed. If the retake is not attended or is still unsuccessful, the test is terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skills test permit, the number of scheduled tests for Subject 2 and Subject 3 (road driving skills) must not exceed five times.

Was this review help?
104
Share
CamilaRose
08/15/2025, 01:35:23 AM

I just took several groups of students for their Subject 2 driving test, and a common issue was stopping midway, such as accidentally halting during reverse parking, which deducts 5 points. Students often struggle with unstable clutch control or excessive tension, causing the vehicle to stop. Although this deduction is only 5 points and doesn’t affect passing, it’s best to avoid it. I recommend practicing semi-engaged clutch control more often, finding an open space to simulate test scenarios while maintaining steady speed—avoid sudden acceleration or deceleration. Before the test, eat something to ease nerves and prevent shaky hands. In real driving, unnecessary stops can be dangerous, potentially leading to rear-end collisions, so the test rules help build a solid foundation and develop good habits to stay calm.

Was this review help?
14
Share
Expand All
RobertFitz
10/19/2025, 10:24:24 PM

Last year when I took the driving test for Subject 2, my hands trembled during the hill-start exercise, causing the car to stall momentarily, which resulted in a 5-point deduction. My heart skipped a beat, but I ultimately passed with an 85. The rules are quite clear—unintentional stops, such as stalling on a slope or during reversing, incur a 5-point penalty, which isn’t too severe since the passing score is 80 out of 100. My advice is to practice more on the course, familiarize yourself with each exercise’s procedure to minimize mistakes, and avoid letting emotions affect your footwork. Controlling the speed is crucial—being too hasty or sluggish can lead to stalling, a common issue for beginners that’s easily improved with practice.

Was this review help?
17
Share
Expand All
IvanFitz
12/02/2025, 09:54:10 PM

Vehicle malfunctions during tests do occur occasionally, but mid-test stops are mostly due to trainee operational errors. For instance, gear shifting hesitation or excessive braking will result in a 5-point deduction. Specific penalties depend on circumstances - stalling the engine during a stop deducts 5 points, and consecutive deductions may lead to failure. I've tested the clutch system with a multimeter. Practice applying even pedal pressure to maintain low-speed stability without depressing fully. The passing score is 80 in actual exams, so such minor deductions aren't critical. Enhanced field training can improve performance significantly while enhancing driving safety.

Was this review help?
1
Share
Expand All
DeBrielle
01/22/2026, 11:17:48 PM

Don't panic if you get a 5-point deduction for stopping during the test. I know many people who passed despite losing some points. The key is to maintain composure and not let nervousness cause you to halt the vehicle abruptly, like suddenly releasing the clutch during parallel parking. Spend more time practicing in the driving school's simulated area to get familiar with the clutch, ensuring smooth movements to minimize the risk of stopping. Passing the test is the main goal; you can learn the safety rules for actual driving later to prevent unexpected stops and drive with more confidence.

Was this review help?
12
Share
Expand All
DawsonDella
04/18/2026, 10:56:56 PM

Stopping midway during Subject 2 deducts 5 points. This is a crucial step to help beginners recognize the importance of stable control and avoid arbitrary stops that could lead to collisions in actual driving. The exam rules encourage us to practice skills, such as maintaining a steady speed in field projects and staying focused. Deducting points is a minor matter, but developing good habits is significant. I recommend starting with a manual transmission to build a solid foundation and ensure safety.

Was this review help?
16
Share
Expand All
More Q&A

Can the Avalon use 95 octane gasoline?

Avalon can use 95 octane gasoline, with 92 octane being the minimum requirement. Using 95 octane gasoline poses no issues. Gasolines with different octane ratings contain varying levels of octane - higher-rated fuels have greater octane content. Gasoline is a volatile, flammable hydrocarbon mixture liquid distilled or cracked from petroleum, primarily used as fuel for spark-ignited internal combustion engines. The Avalon is a mid-size 4-door 5-seater sedan under FAW Toyota, measuring 4975mm in length, 1850mm in width, and 1450mm in height, with a 2870mm wheelbase, equipped with an 8-speed automatic transmission.
111
Share

Does the Audi S3 have a launch control mode?

The Audi S3 is equipped with a launch control mode. Here are the relevant details: 1. The Audi S3 is a performance car. It is powered by a third-generation EA888 engine, which is a 2.0-liter turbocharged engine. This engine delivers 290 horsepower and 380 Nm of maximum torque. It can output maximum power between 5,400 and 6,500 rpm and maximum torque between 1,850 and 5,300 rpm. The engine features hybrid injection technology and uses an aluminum cylinder head with an iron cylinder block. 2. The Audi S3 is paired with a 7-speed dual-clutch transmission, which is highly suitable for performance vehicles. Dual-clutch transmissions offer fast gear shifts and high transmission efficiency. The Audi S3 also comes with a full-time all-wheel-drive system, which provides excellent mechanical grip and enhances straight-line acceleration performance. 3. The Audi S3 features a MacPherson independent front suspension and a multi-link independent rear suspension. The car boasts an attractive exterior design and a well-crafted interior.
117
Share

How to Identify Whether a Car is New?

Methods to identify a new car: 1. Check the manufacturing date: If you encounter a model with a long service life but exceptionally low mileage, there might be an issue with this car. 2. Examine tire wear: New tires have computer-like lines on the tread surface and hair-like protrusions on the sidewalls, which usually wear off after 50-100 kilometers. 2. Inspect brake pad wear: New cars or those driven very short distances show minimal wear; significant wear indicates more usage, even if the odometer shows low mileage. 3. Look at the interior: Seats that have been sat on for extended periods lose elasticity and appear shiny and hard; if the pedals, floor mats, and steering wheel look brand new, these parts may have been replaced. 4. Check the engine bay: Areas that accumulate dirt and are hard to clean in cars that have been driven for some time.
106
Share

Does replacing the front windshield affect the car?

Proper replacement of the front windshield does not affect the car; however, improper installation may cause the adhesive and the windshield to not fit tightly on both sides, which could have an impact. Below are some related details: 1. Improper replacement of the front windshield may result in wind leakage through the gaps between the windshield and the car body during high-speed driving, increasing interior noise. When driving on bumpy roads, there may be rattling or knocking sounds from the front of the car. 2. After replacing the front windshield, to prevent wind or water leakage, avoid washing the car for three days and remove the adhesive tape securing the windshield only after three days. Try to avoid driving on excessively bumpy roads to prevent the windshield from shifting. 3. After replacing the rear windshield, do not open the windows while driving for the first three days to prevent the rear windshield from shifting due to wind pressure.
113
Share

What transmission model does the Lynk & Co 03 use?

Lynk & Co 03 uses a 6-speed manual transmission, 6AT transmission, and 7-speed dual-clutch transmission models. The transmission is an automotive component used to alter the speed and torque from the engine, and it can either fix or change the gear ratio between the output and input shafts. The transmission consists of a gear transmission mechanism and a control mechanism, and can be categorized into stepped, continuously variable, and integrated transmissions. It functions include enabling reverse driving, interrupting power transmission, and changing gear ratios. The Lynk & Co 03 is a compact 4-door 5-seater sedan with dimensions of 4639mm in length, 1840mm in width, and 1472mm in height, and a wheelbase of 2730mm, equipped with a 6-speed manual transmission.
105
Share

What is the meaning of vehicle clearance lights?

Vehicle clearance lights are the outermost lights located at the front and rear of a vehicle, serving as warning indicator lights to alert other vehicles. These lights are installed along the top edges of the vehicle, indicating both the height and width of the car. Safety regulations mandate that vehicles exceeding three meters in height must be equipped with clearance lights. The clearance lights are white at the front and red at the rear, designed to enhance visibility for other vehicles during nighttime driving. Other lighting systems on vehicles include: low beam and high beam headlights, commonly referred to as "headlights". The difference between high beam and low beam lies in their nighttime illumination functions - high beams project light at a higher angle with longer range, while low beams emit light at a lower angle with shorter range.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.