···
Log in / Register

How many points are deducted for hitting the corner during parallel parking in a driving test?

6Answers
DallasRose
08/27/2025, 01:30:17 AM

Hitting the corner during parallel parking deducts 10 points. Parallel parking is one of the test items in Subject 2 of the driving license examination. The purpose of the parallel parking test is to assess the driver's ability to correctly park the vehicle in a roadside parking space on the right. The operational requirement is to stop the car in front of the parking space, then reverse into the space in one go without stopping midway, and avoid the wheels touching or crossing the lane boundary lines or parking space boundary lines. Parallel parking scoring criteria: If the vehicle body crosses the line after parking, it results in failure. Stopping midway results in failure. If the tires touch the lane boundary lines during movement, 10 points are deducted. Failure to turn on the left turn signal when starting deducts 10 points. Failure to turn on the right turn signal when reversing deducts 10 points. Not parking within the designated parking space results in failure. Failure to complete the test within the specified time results in failure. If the vehicle body touches the parking space boundary lines during movement, 10 points are deducted each time. Key points for parallel parking: First, adjust the left and right rearview mirrors so that the left rearview mirror can see the left rear wheel, and the right rearview mirror can see the side of the vehicle. Second, adjust the interior rearview mirror so that the middle of the rear windshield is visible when looking up.

Was this review help?
120
Share
DeKeegan
09/09/2025, 12:28:53 AM

When I took my driving test last year, I was extremely nervous. During the parallel parking, I accidentally ran over the corner of the parking space, and the examiner deducted 10 points immediately. Fortunately, it wasn't too severe—if I had completely crossed the line, I might have failed outright. The reason was that I turned the steering wheel too late, causing the car to tilt and hit the corner. Now when I drive, I pay more attention to adjusting my position using the rearview mirrors because in real-life situations, hitting the corner can easily scratch the tires or the car's paint, leading to extra repair costs. Although losing points during the test may seem minor, I recommend practicing by frequently checking the parking reference points and controlling the speed more carefully to avoid silly mistakes. After developing good habits, parking has become much smoother, safer, and more convenient.

Was this review help?
18
Share
Expand All
McCharlie
10/23/2025, 01:17:54 AM

I'm a driving instructor with years of experience teaching students. Hitting the corner during parallel parking is a common issue, usually resulting in a 10-point deduction during the test. Frequent line crossings can accumulate deductions leading to failure. The main causes are beginners misjudging reference points or failing to align the car properly. I often remind students to use mirrors for checks and operate at a slow speed. In real-world scenarios, hitting corners can also damage wheel balance and cause noise. Test rules vary slightly by region, but focusing on details helps pass. Drawing a line as a guide during practice is better than relying on luck. Developing precise operation habits ensures safer and smoother driving in the future, avoiding major troubles.

Was this review help?
1
Share
Expand All
OKingston
12/06/2025, 12:41:43 AM

I have ten years of experience as a driver. I remember during the driving test, I lost 10 points for touching the corner during parallel parking and almost failed. Nowadays, I rarely have this issue when parking because I'm familiar with the car's width and steering feel. Touching the corner during the test results in point deductions, but in real driving, it's more dangerous—it could scrape the undercarriage or lead to disputes with pedestrians. The main reason for touching the corner is rushing and not adjusting the angle properly. I recommend beginners practice reference points more. When practicing, drive slowly to gradually develop a feel. Losing points is a minor issue, but correcting it early brings long-term safety benefits.

Was this review help?
18
Share
Expand All
VonJulian
01/26/2026, 02:01:10 AM

I just passed my driving test, but lost 10 points for hitting the corner during parallel parking. The examiner said touching lines or corners is a minor mistake costing 10 points, but severe contact could mean instant failure. My mistake was starting too fast. Now I choose wider parking spots to avoid close calls. The test standards are similar - deductions emphasize safety, as hitting corners can damage tires. Practice is key - go slow and check mirrors. Developing good habits saves trouble later.

Was this review help?
4
Share
Expand All
LeAxel
04/22/2026, 12:28:39 AM

During my driver's license test preparation, I studied the rules and learned that touching the corner of the parking space during parallel parking usually deducts 10 points. Reasons include inaccurate steering or a tilted car body. I almost made this mistake myself but managed to correct it in time. Test deductions serve as a wake-up call for beginners to focus on precision, while in real life, touching corners may cause minor damages like tire wear. Practicing with marker points and adjusting positions slowly helps. Once good habits are formed, parking becomes more confident and safer. Though the rule seems minor, it prevents bigger issues.

Was this review help?
9
Share
Expand All
More Q&A

What are the reasons why the Peugeot 408 cannot start?

Dead battery, incorrect gear position, lack of antifreeze, etc. Here are the detailed explanations: 1. Dead battery: This may be caused by leaving the headlights on for an extended period or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also lead to vehicle circuit failures. Checking for a dead battery is simple—just press the horn. 2. Incorrect gear position: For automatic transmission vehicles, the gear must be in P or N position to start. If it is in R or D position, the engine will not start. Some manual transmission vehicles also require the clutch to be depressed to start. 3. Lack of antifreeze: Some car owners use water or low-quality antifreeze, which can cause the entire cooling system to freeze in extremely cold winter conditions. This can lead to a cracked engine, preventing the car's water pump from functioning, making it impossible to start the engine, and damaging other engine components.
108
Share

What is the reference table for dump truck dimensions?

The reference table for dump truck dimensions is 4100 2200 800. Below is an introduction to dump trucks: 1. Introduction: Dump trucks generally refer to vehicles used at construction sites or for construction purposes. 2. Origin: These vehicles can self-unload, so they typically carry items that are not easily damaged or can withstand rough handling, often used to transport earthwork, getting covered in mud all over. Hence, people started calling them dump trucks. 3. Function: They are used to transport sand, soil, and construction materials at construction sites. In Guangdong, they are called dump trucks because they mainly carry earth, stone debris, and other construction materials, with the front of the truck often covered in mud. Therefore, they are referred to as 'dump trucks'.
108
Share

What type of engine oil does the Nissan Sylphy use?

Nissan Sylphy uses mineral engine oil. Here is some relevant information about the Sylphy: 1. Introduction: It is a sedan series launched by Nissan in 1959. In post-war Japan during economic recovery, the Bluebird quickly became one of the best-selling models in the market. Like the Toyota Crown and Corolla series, the Nissan Bluebird became a main force for Japanese cars entering the US market and is also the longest-produced and highest cumulative production model series in Nissan's history. 2. Model Introduction: The Nissan Sylphy is a brand-new strategic model launched globally by Nissan, featuring innovative design and advanced technology. Its stylish and elegant exterior is shaped by S-curve dynamics, while the 2700MM ultra-long wheelbase creates spacious rear legroom, ensuring comfortable seating.
117
Share

What is the length of the a4l?

The length, width, and height dimensions of the a4l are 4858mm/1847mm/1411mm, 4851mm/1847mm/1439mm, and 4858mm/1847mm/1439mm, respectively. These are official data. The length of the a4l refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The turbocharged engine of the a4l has a maximum power of 185kW and a maximum torque of 370Nm, with a maximum horsepower of 252. It features direct fuel injection technology and uses an aluminum alloy cylinder head. This engine is paired with a 7-speed wet dual-clutch transmission. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that in the national standard, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
110
Share

What do AUTO and DUAL mean?

AUTO refers to the automatic air conditioning, while DUAL is the air conditioning zone control button. In automatic mode, regardless of whether cooling or heating is selected, the system can cool when the temperature is above 25 degrees and heat when it's below 25 degrees. DUAL is the air conditioning zone control button. After pressing the DUAL button, you can set the air conditioning temperature for the driver and passenger seats separately. Once the desired temperature is adjusted, turning off this button will allow the automatic air conditioning to regulate the temperature according to the set values. Below is an introduction to air conditioning maintenance: 1. Comprehensive air conditioning inspection: When using the air conditioning for the first time in summer, you should first check the air conditioning system, such as inspecting the refrigerant through the reservoir, checking if the air filter is too dirty, and whether there are any foreign objects in the radiator. 2. Pay attention to air conditioning cleaning: The air filter should be replaced regularly; otherwise, the air conditioning may produce a musty odor. Additionally, the condenser should be cleaned periodically, and the radiator should be removed for thorough cleaning.
112
Share

What Does Hybrid Power Failure Mean?

Hybrid system failures generally fall into two major categories: one is when an abnormality in a minor component causes a chain reaction throughout the system. The other is when the mutual influence of multiple components or parts leads to the direct catastrophic failure of a specific component. It is advisable to promptly visit a 4S dealership for inspection and repair. Below is additional information: 1. Hybrid system failure: This is a general term for abnormalities occurring in one or multiple parts of the hybrid system. Hybrid system issues can arise either from a minor component's abnormality triggering a chain reaction throughout the system (common occurrences include sudden vehicle braking, throttle control failure, transmission lock-up, etc.) or from the mutual influence of multiple components or parts leading to the direct catastrophic failure of a specific component (common examples include damage to terminal components like energy accumulators or pump motors). 2. Electromechanical coupling system: A hybrid electric vehicle is a complex electromechanical coupling system. Compared to conventional vehicles, it incorporates additional mechanical and electrical components such as drive motors and control systems, power batteries and their control systems, and cooling systems for drive motors and power batteries. Consequently, the reliability of the hybrid system is lower than that of conventional vehicles, and the potential for malfunctions is higher.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.