···
Log in / Register

How many points are deducted for crossing the line during parallel parking in Subject 3?

6Answers
ArthurRose
07/28/2025, 08:26:21 AM

After parallel parking in Subject 3, if the vehicle body exceeds the right edge line of the road or the sidewalk edge, 100 points will be deducted. Below is a detailed introduction to the point deductions for Subject 3: Point deduction standards for parallel parking in Subject 3: The point deduction standards for parallel parking in Subject 3 are 10 points and 100 points. Turn on the right turn signal while observing the traffic situation behind you through the rearview mirror. After confirming safety, park the vehicle parallel to the curb within 30 centimeters, but do not touch the curb. Stop the vehicle steadily, engage the parking brake, and shift to neutral. After parking, if the vehicle body exceeds the right edge line of the road or the sidewalk edge, 100 points will be deducted; if the distance between the vehicle body and the right edge line of the road or the sidewalk edge exceeds 50 cm, 100 points will be deducted; if the distance between the vehicle body and the right edge line of the road or the sidewalk edge exceeds 30 cm but does not exceed 50 cm, 10 points will be deducted; if the parking brake is not fully engaged, 10 points will be deducted. Precautions for the Subject 3 test: After the candidate completes all required test items and drives a distance greater than 3 kilometers, the system will automatically prompt for parallel parking. Upon hearing the voice command for parallel parking, the student should choose a clear curb (or solid road edge line) on the test route and complete the parallel parking maneuver after confirming safety. After completing the parallel parking, the system will announce the test results via voice.

Was this review help?
113
Share
DelAnna
08/11/2025, 01:12:57 PM

During the driving test (Subject 3), touching the line while pulling over to the curb results in an immediate 100-point deduction, meaning automatic failure. This is because crossing the line indicates exceeding the allowable parking position limit. Let me remind you – repeated practice before the test is crucial. Don’t make the same mistake I did as a beginner: panicking and losing everything due to an unnoticed line touch. Key practice techniques include slowing down while approaching the curb, checking side mirrors to align the tires, and maintaining an ideal parking distance within 30cm. Touching the line isn’t just a point-loser; it reflects inadequate vehicle control. Other test penalties like stalling only deduct 10 points, but line contact is a critical error. Multiple simulation runs can build muscle memory – remember to activate the turn signal first, then gradually approach while avoiding sharp steering that causes deviation.

Was this review help?
15
Share
Expand All
StephanieMarie
09/28/2025, 02:57:23 AM

Last time I took the driving test for Subject 3, I failed because I pressed the line during the roadside parking, which resulted in an immediate 100-point deduction and failure. I was too nervous during the test and didn’t align the reference points properly, causing the tire to touch the line. The examiner announced the failure on the spot, and I regretted not practicing my distance judgment more beforehand. Actually, pressing the line isn’t just about losing points—it also exposes issues with driving details: in real traffic, you might scrape the lane markings. I recommend using reference points during practice, like aligning a specific part of the car with the curb, slowing down, and making careful adjustments. Don’t be discouraged if you fail; this lesson made me value safety awareness even more. Practicing a few times in an open area before the test can help reduce mistakes.

Was this review help?
15
Share
Expand All
AmyRose
11/11/2025, 09:04:57 PM

In the Subject 3 driving test, touching the line during roadside parking results in an immediate 100-point deduction because safety regulations require precise parking. Touching the line indicates exceeding the safe distance, which in real driving could lead to collisions with curbs or pedestrians. The test is designed with strict penalties to reinforce correct habits. During practice, I learned to slow down, align with reference points, and control steering. After failing due to touching the line, the examiner would remind me of improvement methods to avoid repeating mistakes and prioritize driving safety. Other test components, such as starting the vehicle, should also be performed smoothly.

Was this review help?
5
Share
Expand All
LeWyatt
01/01/2026, 10:45:51 PM

During my driver's license test, failing the roadside parking in Subject 3 by touching the line was my nightmare - one touch and it was over. I kept making mistakes during practice until I learned to approach slowly, signal, and check mirrors. Touching the line isn't minor - it shows poor control. My instructor always said dozens more practices would fix it. Remember, line touches don't just deduct points but affect your overall score - prepare early to boost pass rates. Many make similar mistakes in actual tests, so pre-test simulations are crucial.

Was this review help?
12
Share
Expand All
LaAngela
03/29/2026, 11:53:08 PM

During a mock test, I failed by hitting the line while pulling over, losing all 100 points, which felt extremely frustrating. The examiner explained that crossing the line counts as a positional error, requiring a retake. After that, I practiced precise parking daily and gradually mastered the technique: slowing down, checking reference points, adjusting the steering, and stopping patiently. Although line-crossing is a basic mistake, it carries high risks—avoiding it during the test is key to passing. Many other candidates make this error too, so sharing experiences helps a lot.

Was this review help?
4
Share
Expand All
More Q&A

What tire models does the Volkswagen Tharu have?

The Tharu comes with three tire models: 225/60R16, 225/55R17, and 225/50R18. Below is a related introduction to the Tharu: 1. Exterior: The design adopts the Rock-Cutting concept, featuring raised lines on the ridge-like hood for a stronger sense of power, wide-body dual U-shaped full LED headlights that tilt upwards, and grille strips extending to the headlights. 2. Interior: The cabin features a horizontal layout, enhanced with IMD material panels for a premium feel. Large decorative panels integrate the instrument cluster, display screen, and air vents into a unified design. 3. Powertrain: The Tharu is equipped with a 1.4T and two 2.0T turbocharged engines, delivering maximum power of 110kW and 137kW respectively, with peak torques of 175Nm, 250Nm, and 320Nm.
103
Share

Will the manufacturer provide warranty if the car is not maintained at a 4S shop?

Even if a car is not maintained at a 4S shop, the manufacturer will still provide warranty. The "Motor Vehicle Maintenance Management Regulations" clearly stipulate that manufacturers and 4S shops cannot refuse to provide warranty for vehicles on the grounds that maintenance was not performed at an officially authorized shop, meaning car owners are free to choose their maintenance location. Except for automobile manufacturers fulfilling their responsibilities for defective vehicle recalls and the "three guarantees" for vehicle quality, no unit or individual may force or covertly force the designation of a maintenance operator. Therefore, car owners can freely choose their maintenance location, while 4S shops must comply with providing warranty. However, it is important to note that if maintenance is performed elsewhere, it is essential to keep the maintenance invoice, repair records, and certificates for replaced parts as proof. That said, there are benefits to getting maintenance done at a 4S shop. 4S shops use manufacturer-specified oils and maintenance products and will guide customers on proper usage and fault feedback based on their vehicle usage, which is generally not as professional at external auto repair shops.
115
Share

Should Tire Pressure Be Higher or Lower in Hot Weather?

In hot weather, tire pressure tends to increase. You can adjust it to the lower limit of the standard tire pressure based on the vehicle's load. The standard tire pressure for sedans is usually indicated on the B-pillar near the front doors or on the fuel tank cover. Adjust it to around 2.1 to 2.3 bar. Standard Tire Pressure: For standard tires, the standard pressure is 240-250 kPa, while for reinforced tires, it is 280-290 kPa. Since most vehicle tires fall under the standard category as per international regulations, this is why 4S shops generally inflate tires to 2.5 bar (1 bar = 100 kPa). Summer Tire Precautions: Regularly check tire pressure and inflate according to standard values; inspect tire conditions periodically to avoid bulges, punctures, and excessive wear; do not cool extremely hot tires with cold water, as extreme temperature changes and shocks can accelerate tire aging and reduce lifespan—allow them to cool naturally.
111
Share

Is the Lane-Changing Vehicle Fully Liable in a Collision?

In most cases currently, the driver changing lanes is fully liable for traffic accidents caused by lane-changing, even if the rear vehicle intentionally collides with the lane-changing driver, the latter is still highly likely to bear full responsibility. Scenarios Where the Lane-Changing Driver Bears Full Liability: Whether the lane-changing driver is fully liable depends on whether the lane change was performed properly. If the lane-changing driver fails to yield to vehicles traveling normally in the target lane, resulting in a collision with the rear vehicle, then the lane-changing driver assumes full responsibility. However, if the lane change is performed correctly and the rear vehicle rear-ends the lane-changing vehicle, then the rear vehicle bears primary liability. Precautions for Lane-Changing: When changing lanes, drivers should carefully observe vehicles traveling normally in other lanes. Lane changes must not disrupt the normal flow of traffic. Always signal your intention in advance by turning on the indicator, check the speed and reaction of vehicles behind you, and only proceed with the lane change when the distance and speed are appropriate.
119
Share

Is Vacuum Extraction Required for Brake Fluid Replacement?

Vacuum extraction is required for brake fluid replacement. Methods for brake fluid replacement: The first method, commonly used in general repair shops, involves using a vacuum oil extractor to suck out the brake fluid from the drain port. After adding new brake fluid, the extraction continues until the discharged fluid is clear and free of air bubbles. The second method utilizes a brake fluid replacement machine. The principle involves pressurizing new brake fluid into the system in a fully enclosed environment, pushing out the contaminated fluid. However, this equipment is relatively expensive and has a single function, making it typically available only in well-equipped repair shops and 4S stores. Functions of brake fluid: Brake fluid effectively lubricates moving components of the braking system, extending the service life of brake calipers and rubber cups. It provides anti-corrosion and anti-rust properties, being non-corrosive to both metallic and non-metallic materials in the braking system. It adapts to various environmental conditions, ensuring reliable transmission of braking force under extreme conditions such as high temperatures, severe cold, high speeds, and humidity. Additionally, it serves to transmit energy and dissipate heat.
118
Share

What is the forward gear in a manual-automatic transmission?

The forward gear in a manual-automatic transmission is the D (Drive) gear. It is used when the vehicle is moving forward or accelerating and is the most frequently used gear in daily driving. The other gears in a manual-automatic transmission are as follows: P (Park) gear: Parking gear. It is suitable for long-term parking of the vehicle and should be used in conjunction with the handbrake. R (Reverse) gear: Reverse gear. When reversing, shift the gear lever to the R gear to enable the vehicle to move backward. N (Neutral) gear: Neutral gear. It is used when waiting at traffic lights or during brief stops, but it should not be used for coasting downhill. M (Manual) gear: Manual mode. This gear only appears in manual-automatic transmissions. After engaging the M gear, manual gear shifting can be performed using the gear lever or paddle shifters. S (Sport) gear: Sport mode. Most transmissions now include this gear to enhance driving pleasure. After engaging the S gear, the engine will extract more power at the expense of fuel economy. Additionally, the transmission delays gear shifts, allowing higher RPMs for faster acceleration.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.