···
Log in / Register

How Many Kilometers Should a Three-Way Catalytic Converter Be Cleaned?

1Answers
Poppy
07/29/2025, 08:07:10 PM

Typically, the three-way catalytic converter should be cleaned every 30,000 kilometers. Here is relevant information: 1. Conditions requiring cleaning: When you notice increased fuel consumption or reduced power, check and clean the three-way catalytic converter as needed; After each cleaning of the fuel injectors, throttle, and intake tract maintenance, the three-way catalytic converter should also be cleaned; It is advisable to clean the three-way catalytic converter before the annual exhaust emission test. 2. Cleaning benefits: The three-way cleaning agent can simultaneously clean the engine's intake system, combustion system, and exhaust system. It effectively, quickly, and efficiently removes carbon deposits in the intake tract and combustion chamber, as well as chemical complexes attached to the oxygen sensor and three-way catalytic converter.

Was this review help?
117
Share
More Q&A

What Causes the Plastic Friction Sound When Turning the Steering Wheel?

The reasons for the plastic friction sound when turning the steering wheel are as follows: There are many causes for friction sounds when turning the steering wheel, including friction between plastic components; issues with the steering wheel airbag clock spring; aging of the steering tie rod ball joint; loosening or damage of the stabilizer bar; problems with the shock absorber plane bearing; improper tightness or aging of the power steering belt, etc. Additional details: 1. Problems with the shock absorber plane bearing. A lack of lubrication in the shock absorber plane bearing can also cause abnormal sounds. The inspection method is as follows: open the engine hood and listen to see if the sound is coming from the top of the shock absorber. Solution: Apply some grease to the shock absorber plane bearing. If this doesn't work, the part will need to be replaced. 2. Aging of the steering tie rod ball joint. In this case, besides producing abnormal sounds, it can also cause shaking. The solution is to replace the steering tie rod ball joint. It's important to note that after replacing the part, a four-wheel alignment should be performed.
101
Share

What is the difference between the total mass and the curb weight on the vehicle license?

The differences between the total mass and the curb weight on the vehicle license are as follows: 1. Different scope: The total mass of the vehicle = curb weight + driver and passenger mass + luggage mass. The scope of the total mass is larger. 2. Different indicators: The curb weight of the vehicle is closely related to the design level, manufacturing level, and industrialization level of the vehicle, while the total mass represents the sum of all masses. Extended information: 1. The curb weight of the vehicle refers to the weight of the vehicle when it is fully equipped according to the factory technical conditions (such as spare tires, tools, etc.) and all fluids are filled. The total mass (G) of the vehicle refers to the weight when the vehicle is fully equipped and loaded with passengers (including the driver) and cargo as specified. 2. The curb weight of the vehicle, also known as the unladen weight, refers to the fully equipped mass of the vehicle, including lubricants, fuel, onboard tools, spare tires, and all other devices. The curb weight is commonly referred to as the vehicle's own weight, and its standard definition is the dry mass of the vehicle plus the mass of coolant and fuel (not less than 90% of the tank capacity) as well as the spare wheel and onboard accessories.
112
Share

What Causes the Jerking Sensation When Braking?

Braking with a jerking sensation can be attributed to the following reasons: The jerking sensation during braking is caused by the mismatch between the engine speed and the clutch plate speed. It could also be due to issues with the transmission gear programming or internal contamination and impurities in the transmission. Such contamination or impurities can hinder effective regulation of transmission oil pressure, leading to jerking. Additional Information: Sudden acceleration or acceleration after braking are the two scenarios most likely to cause jerking. The computer's gear-shifting logic is based on the driver's throttle input. Normally, when the driver gradually presses the accelerator, the computer's default logic only requires upshifting to complete the acceleration. However, if the input is too forceful, the clutch may realize during upshifting that a downshift is necessary to fulfill the intention of sudden acceleration, prompting an immediate downshift. During this back-and-forth process, power transmission is not smooth, which easily results in jerking.
107
Share

What License Plate is Required for Motorhomes?

Generally, self-propelled motorhomes are registered with blue license plates, whether they are pickup-style motorhomes, Type B motorhomes, or Type C motorhomes—all receive blue plates. The registration process for motorhomes is quite similar to that of passenger cars, and it can be done either by the owner or through a delegated agent. The registration process generally consists of three main steps: 1. Purchase insurance using the buyer's ID card (or organization code certificate), vehicle certification, and invoice. 2. Bring the vehicle certification, buyer's ID card (or organization code certificate), purchase invoice, and vehicle purchase tax application form to pay the vehicle purchase tax. 3. Take the vehicle certification, buyer's ID card (or organization code certificate), original insurance policy, tax payment certificate, and purchase invoice to the vehicle management office to complete the registration process.
109
Share

Where is the license plate Xi B from?

Currently, there is no license plate with the designation Xi B. Here is some relevant information: 1. A license plate, also known as a vehicle registration plate, is a metal or plastic plate attached to a vehicle, displaying the vehicle's registration number, registration region, and other relevant details. Its primary function is to identify the vehicle's registered region. 2. The license plate can be used to trace the vehicle's owner and registration information. A license plate number is the official designation for a vehicle's registration plate and driving license, as stipulated by national vehicle management regulations. It features a standardized format and design, issued by vehicle management authorities after reviewing, inspecting, and registering the vehicle, and includes a unique registration code on a hard-numbered plate.
120
Share

Where in Shandong is the license plate Lu A from?

Lu A is the license plate of Jinan City, Shandong Province. Here is relevant information: 1. Generally, the first character of a license plate is a Chinese character, representing the abbreviation of the province where the vehicle is registered. For example, Hu represents Shanghai, Lu represents Shandong, etc. The second character is an English letter representing the prefecture-level administrative region where the vehicle is registered. Usually, A represents the provincial capital city, B represents the second largest city in the province, and so on. 2. A license plate refers to the vehicle plate, which is a board hung on the front and rear of the vehicle. It is usually made of aluminum, plastic, or stickers, displaying the vehicle's registration number, registration area, or other basic information. The license plate serves as a unique identifier for each vehicle, allowing authorities to determine the province, city, or county to which the vehicle belongs. The vehicle management office can use the license plate to identify the vehicle's owner.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.